--- a/src/joystick/os2/SDL_sysjoystick.c	Tue Nov 17 04:59:13 2009 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,668 +0,0 @@
-/*
-    SDL - Simple DirectMedia Layer
-    Copyright (C) 1997-2009 Sam Lantinga
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-    Sam Lantinga
-    slouken@libsdl.org
-*/
-#include "SDL_config.h"
-
-#ifdef SDL_JOYSTICK_OS2
-
-/* OS/2 Joystick driver, contributed by Daniel Caetano */
-
-#include <mem.h>
-
-#define INCL_DOSDEVICES
-#define INCL_DOSDEVIOCTL
-#define INCL_DOSMEMMGR
-#include <os2.h>
-#include "joyos2.h"
-
-#include "SDL_joystick.h"
-#include "SDL_events.h"
-#include "../SDL_sysjoystick.h"
-#include "../SDL_joystick_c.h"
-
-HFILE hJoyPort = NULL;		/* Joystick GAME$ Port Address */
-#define MAX_JOYSTICKS	2	/* Maximum of two joysticks */
-#define MAX_AXES	4			/* each joystick can have up to 4 axes */
-#define MAX_BUTTONS	8		/* 8 buttons */
-#define MAX_HATS	0			/* 0 hats - OS/2 doesn't support it */
-#define MAX_BALLS	0			/* and 0 balls - OS/2 doesn't support it */
-#define AXIS_MIN -32768		/* minimum value for axes coordinate */
-#define AXIS_MAX 32767		/* maximum value for axes coordinate */
-#define MAX_JOYNAME	128	/* Joystick name may have 128 characters */
-/* limit axes to 256 possible positions to filter out noise */
-#define JOY_AXIS_THRESHOLD (((AXIS_MAX)-(AXIS_MIN))/256)
-/* Calc Button Flag for buttons A to D */
-#define JOY_BUTTON_FLAG(n) (1<<n)
-
-/* Joystick data... hold information about detected devices */
-typedef struct SYS_JoyData_s
-{
-Sint8					id;								// Device ID
-char					szDeviceName[MAX_JOYNAME];	// Device Name
-char					axes;								// Number of axes
-char					buttons;							// Number of buttons
-char					hats;								// Number of buttons
-char					balls;							// Number of buttons
-int					axes_min[MAX_AXES];			// minimum callibration value for axes
-int					axes_med[MAX_AXES];			// medium callibration value for axes
-int					axes_max[MAX_AXES];			// maximum callibration value for axes
-int					buttoncalc[4];					// Used for buttons 5, 6, 7 and 8.
-} SYS_JoyData_t, *SYS_JoyData_p;
-
-SYS_JoyData_t SYS_JoyData[MAX_JOYSTICKS];
-
-
-/* Structure used to convert data from OS/2 driver format to SDL format */
-struct joystick_hwdata
-{
-Sint8					id;
-struct _transaxes
-	{
-	int offset;					/* Center Offset */
-	float scale1;				/* Center to left/up Scale */
-	float scale2;				/* Center to right/down Scale */
-	} transaxes[MAX_AXES];
-};
-
-/* Structure used to get values from Joystick Environment Variable */
-struct _joycfg
-{
-char	name[MAX_JOYNAME];
-unsigned int	axes;
-unsigned int	buttons;
-unsigned int	hats;
-unsigned int	balls;
-};
-
-/* OS/2 Implementation Function Prototypes */
-APIRET joyPortOpen(HFILE * hGame);
-void joyPortClose(HFILE * hGame);
-int joyGetData(char *joyenv, char *name, char stopchar, size_t maxchars);
-int joyGetEnv(struct _joycfg * joydata);
-
-
-
-/************************************************************************/
-/* Function to scan the system for joysticks.									*/
-/* This function should set SDL_numjoysticks to the number of available	*/
-/* joysticks.  Joystick 0 should be the system default joystick.			*/
-/* It should return 0, or -1 on an unrecoverable fatal error.				*/
-/************************************************************************/
-int SDL_SYS_JoystickInit(void)
-{
-APIRET rc;											/* Generic OS/2 return code */
-GAME_PORT_STRUCT	stJoyStatus;				/* Joystick Status Structure */
-GAME_PARM_STRUCT	stGameParms;				/* Joystick Parameter Structure */
-GAME_CALIB_STRUCT	stGameCalib;				/* Calibration Struct */
-ULONG ulDataLen;									/* Size of data */
-ULONG ulLastTick;						/* Tick Counter for timing operations */
-Uint8 maxdevs;										/* Maximum number of devices */
-Uint8 numdevs;										/* Number of present devices */
-Uint8 maxbut;										/* Maximum number of buttons... */
-Uint8 i;												/* Temporary Count Vars */
-Uint8 ucNewJoystickMask;										/* Mask for Joystick Detection */
-struct _joycfg joycfg;							/* Joy Configuration from envvar */
-
-
-/* Get Max Number of Devices */
-rc = joyPortOpen(&hJoyPort); /* Open GAME$ port */
-if (rc != 0) return 0;	/* Cannot open... report no joystick */
-ulDataLen = sizeof(stGameParms);
-rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_GET_PARMS,
-	NULL, 0, NULL, &stGameParms, ulDataLen, &ulDataLen); /* Ask device info */
-if (rc != 0)
-	{
-	joyPortClose(&hJoyPort);
-	SDL_SetError("Could not read joystick port.");
-	return -1;
-	}
-if (stGameParms.useA != 0) maxdevs++;
-if (stGameParms.useB != 0) maxdevs++;
-if ( maxdevs > MAX_JOYSTICKS ) maxdevs = MAX_JOYSTICKS;
-
-/* Defines min/max axes values (callibration) */
-ulDataLen = sizeof(stGameCalib);
-rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_GET_CALIB,
-	NULL, 0, NULL, &stGameCalib, ulDataLen, &ulDataLen);
-if (rc != 0)
-	{
-	joyPortClose(&hJoyPort);
-	SDL_SetError("Could not read callibration data.");
-	return -1;
-	}
-
-/* Determine how many joysticks are active */
-numdevs = 0;	/* Points no device */
-ucNewJoystickMask = 0x0F;	/* read all 4 joystick axis */
-ulDataLen = sizeof(ucNewJoystickMask);
-rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_PORT_RESET,
-		&ucNewJoystickMask, ulDataLen, &ulDataLen, NULL, 0, NULL);
-if (rc == 0)
-	{
-	ulDataLen = sizeof(stJoyStatus);
-	rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_PORT_GET,
-		NULL, 0, NULL, &stJoyStatus, ulDataLen, &ulDataLen);
-	if (rc != 0)
-		{
-		joyPortClose(&hJoyPort);
-		SDL_SetError("Could not call joystick port.");
-		return -1;
-		}
-	ulLastTick = stJoyStatus.ulJs_Ticks;
-	while (stJoyStatus.ulJs_Ticks == ulLastTick)
-		{
-		rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_PORT_GET,
-			NULL, 0, NULL, &stJoyStatus, ulDataLen, &ulDataLen);
-		}
-	if ((stJoyStatus.ucJs_JoyStickMask & 0x03) > 0) numdevs++;
-	if (((stJoyStatus.ucJs_JoyStickMask >> 2) & 0x03) > 0) numdevs++;
-	}
-
-if (numdevs>maxdevs) numdevs=maxdevs;
-
-/* If *any* joystick was detected... Let's configure SDL for them */
-if (numdevs > 0)
-	{
-	/* Verify if it is a "user defined" joystick */
-	if (joyGetEnv(&joycfg))
-		{
-		GAME_3POS_STRUCT * axis[4];
-		axis[0] = &stGameCalib.Ax;
-		axis[1] = &stGameCalib.Ay;
-		axis[2] = &stGameCalib.Bx;
-		axis[3] = &stGameCalib.By;
-		/* Say it has one device only (user defined is always one device only) */
-		numdevs = 1;
-		/* Define Device 0 as... */
-		SYS_JoyData[0].id=0;
-		/* Define Number of Axes... up to 4 */
-		if (joycfg.axes>MAX_AXES) joycfg.axes = MAX_AXES;
-		SYS_JoyData[0].axes = joycfg.axes;
-		/* Define number of buttons... 8 if 2 axes, 6 if 3 axes and 4 if 4 axes */
-		maxbut = MAX_BUTTONS;
-		if (joycfg.axes>2) maxbut-=((joycfg.axes-2)<<1); /* MAX_BUTTONS - 2*(axes-2) */
-		if (joycfg.buttons > maxbut) joycfg.buttons = maxbut;
-		SYS_JoyData[0].buttons = joycfg.buttons;
-		/* Define number of hats */
-		if (joycfg.hats > MAX_HATS) joycfg.hats = MAX_HATS;
-		SYS_JoyData[0].hats = joycfg.hats;
-		/* Define number of balls */
-		if (joycfg.balls > MAX_BALLS) joycfg.balls = MAX_BALLS;
-		SYS_JoyData[0].balls = joycfg.balls;
-		/* Initialize Axes Callibration Values */
-		for (i=0; i<joycfg.axes; i++)
-			{
-			SYS_JoyData[0].axes_min[i] = axis[i]->lower;
-			SYS_JoyData[0].axes_med[i] = axis[i]->centre;
-			SYS_JoyData[0].axes_max[i] = axis[i]->upper;
-			}
-		/* Initialize Buttons 5 to 8 structures */
-		if (joycfg.buttons>=5) SYS_JoyData[0].buttoncalc[0]=((axis[2]->lower+axis[3]->centre)>>1);
-		if (joycfg.buttons>=6) SYS_JoyData[0].buttoncalc[1]=((axis[3]->lower+axis[3]->centre)>>1);
-		if (joycfg.buttons>=7) SYS_JoyData[0].buttoncalc[2]=((axis[2]->upper+axis[3]->centre)>>1);
-		if (joycfg.buttons>=8) SYS_JoyData[0].buttoncalc[3]=((axis[3]->upper+axis[3]->centre)>>1);
-		/* Intialize Joystick Name */
-		SDL_strlcpy (SYS_JoyData[0].szDeviceName,joycfg.name, SDL_arraysize(SYS_JoyData[0].szDeviceName));
-		}
-	/* Default Init ... autoconfig */
-	else
-		{
-		/* if two devices were detected... configure as Joy1 4 axis and Joy2 2 axis */
-		if (numdevs==2)
-			{
-			/* Define Device 0 as 4 axes, 4 buttons */
-			SYS_JoyData[0].id=0;
-			SYS_JoyData[0].axes = 4;
-			SYS_JoyData[0].buttons = 4;
-			SYS_JoyData[0].hats = 0;
-			SYS_JoyData[0].balls = 0;
-			SYS_JoyData[0].axes_min[0] = stGameCalib.Ax.lower;
-			SYS_JoyData[0].axes_med[0] = stGameCalib.Ax.centre;
-			SYS_JoyData[0].axes_max[0] = stGameCalib.Ax.upper;
-			SYS_JoyData[0].axes_min[1] = stGameCalib.Ay.lower;
-			SYS_JoyData[0].axes_med[1] = stGameCalib.Ay.centre;
-			SYS_JoyData[0].axes_max[1] = stGameCalib.Ay.upper;
-			SYS_JoyData[0].axes_min[2] = stGameCalib.Bx.lower;
-			SYS_JoyData[0].axes_med[2] = stGameCalib.Bx.centre;
-			SYS_JoyData[0].axes_max[2] = stGameCalib.Bx.upper;
-			SYS_JoyData[0].axes_min[3] = stGameCalib.By.lower;
-			SYS_JoyData[0].axes_med[3] = stGameCalib.By.centre;
-			SYS_JoyData[0].axes_max[3] = stGameCalib.By.upper;
-			/* Define Device 1 as 2 axes, 2 buttons */
-			SYS_JoyData[1].id=1;
-			SYS_JoyData[1].axes = 2;
-			SYS_JoyData[1].buttons = 2;
-			SYS_JoyData[1].hats = 0;
-			SYS_JoyData[1].balls = 0;
-			SYS_JoyData[1].axes_min[0] = stGameCalib.Bx.lower;
-			SYS_JoyData[1].axes_med[0] = stGameCalib.Bx.centre;
-			SYS_JoyData[1].axes_max[0] = stGameCalib.Bx.upper;
-			SYS_JoyData[1].axes_min[1] = stGameCalib.By.lower;
-			SYS_JoyData[1].axes_med[1] = stGameCalib.By.centre;
-			SYS_JoyData[1].axes_max[1] = stGameCalib.By.upper;
-			}
-		/* One joystick only? */
-		else
-			{
-			/* If it is joystick A... */
-			if ((stJoyStatus.ucJs_JoyStickMask & 0x03) > 0)
-				{
-				/* Define Device 0 as 2 axes, 4 buttons */
-				SYS_JoyData[0].id=0;
-				SYS_JoyData[0].axes = 2;
-				SYS_JoyData[0].buttons = 4;
-				SYS_JoyData[0].hats = 0;
-				SYS_JoyData[0].balls = 0;
-				SYS_JoyData[0].axes_min[0] = stGameCalib.Ax.lower;
-				SYS_JoyData[0].axes_med[0] = stGameCalib.Ax.centre;
-				SYS_JoyData[0].axes_max[0] = stGameCalib.Ax.upper;
-				SYS_JoyData[0].axes_min[1] = stGameCalib.Ay.lower;
-				SYS_JoyData[0].axes_med[1] = stGameCalib.Ay.centre;
-				SYS_JoyData[0].axes_max[1] = stGameCalib.Ay.upper;
-				}
-			/* If not, it is joystick B */
-			else
-				{
-				/* Define Device 1 as 2 axes, 2 buttons */
-				SYS_JoyData[0].id=1;
-				SYS_JoyData[0].axes = 2;
-				SYS_JoyData[0].buttons = 2;
-				SYS_JoyData[0].hats = 0;
-				SYS_JoyData[0].balls = 0;
-				SYS_JoyData[0].axes_min[0] = stGameCalib.Bx.lower;
-				SYS_JoyData[0].axes_med[0] = stGameCalib.Bx.centre;
-				SYS_JoyData[0].axes_max[0] = stGameCalib.Bx.upper;
-				SYS_JoyData[0].axes_min[1] = stGameCalib.By.lower;
-				SYS_JoyData[0].axes_med[1] = stGameCalib.By.centre;
-				SYS_JoyData[0].axes_max[1] = stGameCalib.By.upper;
-				}
-			}
-		/* Hack to define Joystick Port Names */
-		if ( numdevs > maxdevs ) numdevs = maxdevs;
-		for (i=0; i<numdevs; i++)
-                  SDL_snprintf (SYS_JoyData[i].szDeviceName, SDL_arraysize(SYS_JoyData[i].szDeviceName), "Default Joystick %c", 'A'+SYS_JoyData[i].id);
-
-                }
-	}
-/* Return the number of devices found */
-return(numdevs);
-}
-
-
-/***********************************************************/
-/* Function to get the device-dependent name of a joystick */
-/***********************************************************/
-const char *SDL_SYS_JoystickName(int index)
-{
-/* No need to verify if device exists, already done in upper layer */
-return(SYS_JoyData[index].szDeviceName);
-}
-
-
-
-/******************************************************************************/
-/* Function to open a joystick for use.													*/
-/* The joystick to open is specified by the index field of the joystick.		*/
-/* This should fill the nbuttons and naxes fields of the joystick structure.	*/
-/* It returns 0, or -1 if there is an error.												*/
-/******************************************************************************/
-int SDL_SYS_JoystickOpen(SDL_Joystick *joystick)
-{
-int index;		/* Index shortcut for index in joystick structure */
-int i;			/* Generic Counter */
-
-/* allocate memory for system specific hardware data */
-joystick->hwdata = (struct joystick_hwdata *) SDL_malloc(sizeof(*joystick->hwdata));
-if (joystick->hwdata == NULL)
-	{
-	SDL_OutOfMemory();
-	return(-1);
-	}
-/* Reset Hardware Data */
-SDL_memset(joystick->hwdata, 0, sizeof(*joystick->hwdata));
-
-/* ShortCut Pointer */
-index = joystick->index;
-/* Define offsets and scales for all axes */
-joystick->hwdata->id = SYS_JoyData[index].id;
-for ( i = 0; i < MAX_AXES; ++i )
-	{
-	if ( (i<2) || i < SYS_JoyData[index].axes )
-		{
-		joystick->hwdata->transaxes[i].offset = ((AXIS_MAX + AXIS_MIN)>>1) - SYS_JoyData[index].axes_med[i];
-		//joystick->hwdata->transaxes[i].scale = (float)((AXIS_MAX - AXIS_MIN)/(SYS_JoyData[index].axes_max[i]-SYS_JoyData[index].axes_min[i]));
-		joystick->hwdata->transaxes[i].scale1 = (float)abs((AXIS_MIN/SYS_JoyData[index].axes_min[i]));
-		joystick->hwdata->transaxes[i].scale2 = (float)abs((AXIS_MAX/SYS_JoyData[index].axes_max[i]));
-		}
-	else
-		{
-		joystick->hwdata->transaxes[i].offset = 0;
-		//joystick->hwdata->transaxes[i].scale = 1.0; /* Just in case */
-		joystick->hwdata->transaxes[i].scale1 = 1.0; /* Just in case */
-		joystick->hwdata->transaxes[i].scale2 = 1.0; /* Just in case */
-		}
-	}
-
-/* fill nbuttons, naxes, and nhats fields */
-joystick->nbuttons = SYS_JoyData[index].buttons;
-joystick->naxes = SYS_JoyData[index].axes;
-/* joystick->nhats = SYS_JoyData[index].hats; */
-joystick->nhats = 0; /* No support for hats at this time */
-/* joystick->nballs = SYS_JoyData[index].balls; */
-joystick->nballs = 0; /* No support for balls at this time */
-return 0;
-}
-
-
-
-/***************************************************************************/
-/* Function to update the state of a joystick - called as a device poll.	*/
-/* This function shouldn't update the joystick structure directly,			*/
-/* but instead should call SDL_PrivateJoystick*() to deliver events			*/
-/* and update joystick device state.													*/
-/***************************************************************************/
-void SDL_SYS_JoystickUpdate(SDL_Joystick *joystick)
-{
-APIRET rc;									/* Generic OS/2 return code */
-int index;									/* index shortcurt to joystick index */
-int i;										/* Generic counter */
-int normbut;								/* Number of buttons reported by joystick */
-int corr;									/* Correction for button names */
-Sint16 value, change;					/* Values used to update axis values */
-struct _transaxes *transaxes;			/* Shortcut for Correction structure */
-Uint32 pos[MAX_AXES];					/* Vector to inform the Axis status */
-ULONG ulDataLen;							/* Size of data */
-GAME_STATUS_STRUCT stGameStatus;		/* Joystick Status Structure */
-
-ulDataLen = sizeof(stGameStatus);
-rc = DosDevIOCtl(hJoyPort, IOCTL_CAT_USER, GAME_GET_STATUS,
-	NULL, 0, NULL, &stGameStatus, ulDataLen, &ulDataLen);
-if (rc != 0)
-	{
-	SDL_SetError("Could not read joystick status.");
-	return; /* Could not read data */
-	}
-
-/* Shortcut pointer */
-index = joystick->index;
-/* joystick motion events */
-
-if (SYS_JoyData[index].id == 0)
-	{
-	pos[0] = stGameStatus.curdata.A.x;
-	pos[1] = stGameStatus.curdata.A.y;
-	if (SYS_JoyData[index].axes >= 3)	pos[2] = stGameStatus.curdata.B.x;
-	else pos[2]=0;
-	if (SYS_JoyData[index].axes >= 4)	pos[3] = stGameStatus.curdata.B.y;
-	else pos[3]=0;
-	pos[4]=0;	/* OS/2 basic drivers do not support more than 4 axes joysticks */
-	pos[5]=0;
-	}
-else if (SYS_JoyData[index].id == 1)
-	{
-	pos[0] = stGameStatus.curdata.B.x;
-	pos[1] = stGameStatus.curdata.B.y;
-	pos[2]=0;
-	pos[3]=0;
-	pos[4]=0;
-	pos[5]=0;
-	}
-
-/* Corrects the movements using the callibration */
-transaxes = joystick->hwdata->transaxes;
-for (i = 0; i < joystick->naxes; i++)
-	{
-	value = pos[i] + transaxes[i].offset;
-	if (value<0)
-		{
-		value*=transaxes[i].scale1;
-		if (value>0) value = AXIS_MIN;
-		}
-	else
-		{
-		value*=transaxes[i].scale2;
-		if (value<0) value = AXIS_MAX;
-		}
-	change = (value - joystick->axes[i]);
-	if ( (change < -JOY_AXIS_THRESHOLD) || (change > JOY_AXIS_THRESHOLD) )
-		{
-		SDL_PrivateJoystickAxis(joystick, (Uint8)i, (Sint16)value);
-		}
-	}
-
-/* joystick button A to D events */
-if (SYS_JoyData[index].id == 1) corr = 2;
-else corr = 0;
-normbut=4;	/* Number of normal buttons */
-if (joystick->nbuttons<normbut) normbut = joystick->nbuttons;
-for ( i = corr; (i-corr) < normbut; ++i )
-	{
-	/*
-		Button A: 1110 0000
-		Button B: 1101 0000
-		Button C: 1011 0000
-		Button D: 0111 0000
-	*/
-	if ( (~stGameStatus.curdata.butMask)>>4 & JOY_BUTTON_FLAG(i) )
-		{
-		if ( ! joystick->buttons[i-corr] )
-			{
-			SDL_PrivateJoystickButton(joystick, (Uint8)(i-corr), SDL_PRESSED);
-			}
-		}
-	else
-		{
-		if ( joystick->buttons[i-corr] )
-			{
-			SDL_PrivateJoystickButton(joystick, (Uint8)(i-corr), SDL_RELEASED);
-			}
-		}
-	}
-
-/* Joystick button E to H buttons */
-	/*
-		Button E: Axis 2 X Left
-		Button F: Axis 2 Y Up
-		Button G: Axis 2 X Right
-		Button H: Axis 2 Y Down
-	*/
-if (joystick->nbuttons>=5)
-	{
-	if (stGameStatus.curdata.B.x < SYS_JoyData[index].buttoncalc[0]) SDL_PrivateJoystickButton(joystick, (Uint8)4, SDL_PRESSED);
-	else SDL_PrivateJoystickButton(joystick, (Uint8)4, SDL_RELEASED);
-	}
-if (joystick->nbuttons>=6)
-	{
-	if (stGameStatus.curdata.B.y < SYS_JoyData[index].buttoncalc[1]) SDL_PrivateJoystickButton(joystick, (Uint8)5, SDL_PRESSED);
-	else SDL_PrivateJoystickButton(joystick, (Uint8)5, SDL_RELEASED);
-	}
-if (joystick->nbuttons>=7)
-	{
-	if (stGameStatus.curdata.B.x > SYS_JoyData[index].buttoncalc[2]) SDL_PrivateJoystickButton(joystick, (Uint8)6, SDL_PRESSED);
-	else SDL_PrivateJoystickButton(joystick, (Uint8)6, SDL_RELEASED);
-	}
-if (joystick->nbuttons>=8)
-	{
-	if (stGameStatus.curdata.B.y > SYS_JoyData[index].buttoncalc[3]) SDL_PrivateJoystickButton(joystick, (Uint8)7, SDL_PRESSED);
-	else SDL_PrivateJoystickButton(joystick, (Uint8)7, SDL_RELEASED);
-	}
-
-/* joystick hat events */
-/* Not Supported under OS/2 */
-/* joystick ball events */
-/* Not Supported under OS/2 */
-}
-
-
-
-/******************************************/
-/* Function to close a joystick after use */
-/******************************************/
-void SDL_SYS_JoystickClose(SDL_Joystick *joystick)
-{
-if (joystick->hwdata != NULL)
-	{
-	/* free system specific hardware data */
-	SDL_free(joystick->hwdata);
-	}
-}
-
-
-
-/********************************************************************/
-/* Function to perform any system-specific joystick related cleanup */
-/********************************************************************/
-void SDL_SYS_JoystickQuit(void)
-{
-joyPortClose(&hJoyPort);
-}
-
-
-
-/************************/
-/************************/
-/* OS/2 Implementations */
-/************************/
-/************************/
-
-
-/*****************************************/
-/* Open Joystick Port, if not opened yet */
-/*****************************************/
-APIRET joyPortOpen(HFILE * hGame)
-{
-APIRET		rc;				/* Generic Return Code */
-ULONG			ulAction;		/* ? */
-ULONG			ulVersion;		/* Version of joystick driver */
-ULONG			ulDataLen;		/* Size of version data */
-
-/* Verifies if joyport is not already open... */
-if (*hGame != NULL) return 0;
-/* Open GAME$ for read */
-rc = DosOpen((PSZ)GAMEPDDNAME, hGame, &ulAction, 0, FILE_READONLY,
-	FILE_OPEN, OPEN_ACCESS_READONLY | OPEN_SHARE_DENYNONE, NULL);
-if (rc != 0)
-	{
-	SDL_SetError("Could not open Joystick Port.");
-	return -1;
-	}
-	
-/* Get Joystick Driver Version... must be 2.0 or higher */
-ulVersion = 0;
-ulDataLen = sizeof(ulVersion);
-rc = DosDevIOCtl( *hGame, IOCTL_CAT_USER, GAME_GET_VERSION,
-	NULL, 0, NULL, &ulVersion, ulDataLen, &ulDataLen);
-if (rc != 0)
-	{
-	joyPortClose(hGame);
-	SDL_SetError("Could not get Joystick Driver version.");
-	return -1;	
-	}
-if (ulVersion < GAME_VERSION)
-	{
-	joyPortClose(hGame);
-	SDL_SetError("Driver too old. At least IBM driver version 2.0 required.");
-	return -1;
-	}
-return 0;
-}
-
-
-
-/****************************/
-/* Close JoyPort, if opened */
-/****************************/
-void joyPortClose(HFILE * hGame)
-{
-if (*hGame != NULL) DosClose(*hGame);
-*hGame = NULL;
-}
-
-
-
-/***************************/
-/* Get SDL Joystick EnvVar */
-/***************************/
-int joyGetEnv(struct _joycfg * joydata)
-{
-char *joyenv;				/* Pointer to tested character */
-char tempnumber[5];		/* Temporary place to put numeric texts */
-
-joyenv = SDL_getenv("SDL_OS2_JOYSTICK");
-if (joyenv == NULL) return 0;
-/* Joystick Environment is defined! */
-while (*joyenv==' ' && *joyenv!=0) joyenv++; /* jump spaces... */
-/* If the string name starts with '... get if fully */
-if (*joyenv=='\'') joyenv+=joyGetData(++joyenv,joydata->name,'\'',sizeof(joydata->name));
-/* If not, get it until the next space */
-else if (*joyenv=='\"') joyenv+=joyGetData(++joyenv,joydata->name,'\"',sizeof(joydata->name));
-else joyenv+=joyGetData(joyenv,joydata->name,' ',sizeof(joydata->name));
-/* Now get the number of axes */
-while (*joyenv==' ' && *joyenv!=0) joyenv++; /* jump spaces... */
-joyenv+=joyGetData(joyenv,tempnumber,' ',sizeof(tempnumber));
-joydata->axes = atoi(tempnumber);
-/* Now get the number of buttons */
-while (*joyenv==' ' && *joyenv!=0) joyenv++; /* jump spaces... */
-joyenv+=joyGetData(joyenv,tempnumber,' ',sizeof(tempnumber));
-joydata->buttons = atoi(tempnumber);
-/* Now get the number of hats */
-while (*joyenv==' ' && *joyenv!=0) joyenv++; /* jump spaces... */
-joyenv+=joyGetData(joyenv,tempnumber,' ',sizeof(tempnumber));
-joydata->hats = atoi(tempnumber);
-/* Now get the number of balls */
-while (*joyenv==' ' && *joyenv!=0) joyenv++; /* jump spaces... */
-joyenv+=joyGetData(joyenv,tempnumber,' ',sizeof(tempnumber));
-joydata->balls = atoi(tempnumber);
-return 1;
-}
-
-
-
-/************************************************************************/
-/* Get a text from in the string starting in joyenv until it finds		*/
-/* the stopchar or maxchars is reached. The result is placed in name.	*/
-/************************************************************************/
-int joyGetData(char *joyenv, char *name, char stopchar, size_t maxchars)
-{
-char *nameptr;			/* Pointer to the selected character */
-int chcnt=0;			/* Count how many characters where copied */
-
-nameptr=name;
-while (*joyenv!=stopchar && *joyenv!=0)
-	{
-	if (nameptr<(name+(maxchars-1)))
-		{
-		*nameptr = *joyenv; /* Only copy if smaller than maximum */
-		nameptr++;
-		}
-	chcnt++;
-	joyenv++;
-	}
-if (*joyenv==stopchar)
-	{
-	joyenv++; /* Jump stopchar */
-	chcnt++;
-	}
-*nameptr = 0; /* Mark last byte */
-return chcnt;
-}
-
-#endif /* SDL_JOYSTICK_OS2 */

--- a/src/joystick/os2/joyos2.h	Tue Nov 17 04:59:13 2009 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,177 +0,0 @@
-/*****************************************************************************/
-/*                                                                           */
-/* COPYRIGHT    Copyright (C) 1995 IBM Corporation                           */
-/*                                                                           */
-/*    The following IBM OS/2 source code is provided to you solely for       */
-/*    the purpose of assisting you in your development of OS/2 device        */
-/*    drivers. You may use this code in accordance with the IBM License      */
-/*    Agreement provided in the IBM Device Driver Source Kit for OS/2. This  */
-/*    Copyright statement may not be removed.                                */
-/*                                                                           */
-/*****************************************************************************/
-#ifndef JOYOS2_H
-#define JOYOS2_H
-
-/****** GAMEPORT.SYS joystick definitions, start *****************************/
-#define GAME_VERSION    0x20           /* 2.0 First IBM version */
-#define GAMEPDDNAME     "GAME$   "
-#define IOCTL_CAT_USER	0x80
-#define GAME_PORT_GET	0x20		/* read GAMEPORT.SYS values */
-#define GAME_PORT_RESET 0x60		/* reset joystick mask with given value */
-
-#pragma pack(1)				/* pack structure size is 1 byte */
-typedef struct {			/* GAMEPORT.SYS structure */
-	USHORT	usJs_AxCnt;		/* Joystick_A X position */
-	USHORT	usJs_AyCnt;		/* Joystick_A Y position */
-	USHORT	usJs_BxCnt;		/* Joystick_B X position */
-	USHORT	usJs_ByCnt;		/* Joystick_B Y position */
-	USHORT	usJs_ButtonA1Cnt;	/* button A1 press count */
-	USHORT	usJs_ButtonA2Cnt;	/* button A2 press count */
-	USHORT	usJs_ButtonB1Cnt;	/* button B1 press count */
-	USHORT	usJs_ButtonB2Cnt;	/* button B2 press count */
-	UCHAR	ucJs_JoyStickMask;	/* mask of connected joystick pots */
-	UCHAR	ucJs_ButtonStatus;	/* bits of switches down */
-	ULONG	ulJs_Ticks;		/* joystick clock ticks */
-} GAME_PORT_STRUCT;
-#pragma pack()				/*reset to normal pack size */
-/****** GAMEPORT.SYS joystick definitions, end *******************************/
-
-
-/****************************************************************************/
-#define GAME_GET_VERSION                0x01
-#define GAME_GET_PARMS                  0x02
-#define GAME_SET_PARMS                  0x03
-#define GAME_GET_CALIB                  0x04
-#define GAME_SET_CALIB                  0x05
-#define GAME_GET_DIGSET                 0x06
-#define GAME_SET_DIGSET                 0x07
-#define GAME_GET_STATUS                 0x10
-#define GAME_GET_STATUS_BUTWAIT         0x11
-#define GAME_GET_STATUS_SAMPWAIT        0x12
-/****************************************************************************/
-
-/****************************************************************************/
-// bit masks for each axis
-#define JOY_AX_BIT      0x01
-#define JOY_AY_BIT      0x02
-#define JOY_A_BITS      (JOY_AX_BIT|JOY_AY_BIT)
-#define JOY_BX_BIT      0x04
-#define JOY_BY_BIT      0x08
-#define JOY_B_BITS      (JOY_BX_BIT|JOY_BY_BIT)
-#define JOY_ALLPOS_BITS (JOY_A_BITS|JOY_B_BITS)
-
-// bit masks for each button
-#define JOY_BUT1_BIT    0x10
-#define JOY_BUT2_BIT    0x20
-#define JOY_BUT3_BIT    0x40
-#define JOY_BUT4_BIT    0x80
-#define JOY_ALL_BUTS    (JOY_BUT1_BIT|JOY_BUT2_BIT|JOY_BUT3_BIT|JOY_BUT4_BIT)
-/****************************************************************************/
-
-/****************************************************************************/
-// 1-D position struct used for each axis
-typedef SHORT   GAME_POS;       /* some data formats require signed values */
-
-// simple 2-D position for each joystick
-typedef struct
-{
-        GAME_POS                x;
-        GAME_POS                y;
-}
-GAME_2DPOS_STRUCT;
-
-// struct defining the instantaneous state of both sticks and all buttons
-typedef struct
-{
-        GAME_2DPOS_STRUCT       A;
-        GAME_2DPOS_STRUCT       B;
-        USHORT                  butMask;
-}
-GAME_DATA_STRUCT;
-
-// struct to be used for calibration and digital response on each axis
-typedef struct
-{
-        GAME_POS                lower;
-        GAME_POS                centre;
-        GAME_POS                upper;
-}
-GAME_3POS_STRUCT;
-/****************************************************************************/
-
-/****************************************************************************/
-// status struct returned to OS/2 applications:
-// current data for all sticks as well as button counts since last read
-typedef struct
-{
-        GAME_DATA_STRUCT        curdata;
-        USHORT                  b1cnt;
-        USHORT                  b2cnt;
-        USHORT                  b3cnt;
-        USHORT                  b4cnt;
-}
-GAME_STATUS_STRUCT;
-/****************************************************************************/
-
-/****************************************************************************/
-/* in use bitmasks originating in 0.2b */
-#define GAME_USE_BOTH_OLDMASK   0x01    /* for backward compat with bool */
-#define GAME_USE_X_NEWMASK      0x02
-#define GAME_USE_Y_NEWMASK      0x04
-#define GAME_USE_X_EITHERMASK   (GAME_USE_X_NEWMASK|GAME_USE_BOTH_OLDMASK)
-#define GAME_USE_Y_EITHERMASK   (GAME_USE_Y_NEWMASK|GAME_USE_BOTH_OLDMASK)
-#define GAME_USE_BOTH_NEWMASK   (GAME_USE_X_NEWMASK|GAME_USE_Y_NEWMASK)
-
-/* only timed sampling implemented in version 1.0 */
-#define GAME_MODE_TIMED         1       /* timed sampling */
-#define GAME_MODE_REQUEST       2       /* request driven sampling */
-
-/* only raw implemented in version 1.0 */
-#define GAME_DATA_FORMAT_RAW    1       /* [l,c,r]   */
-#define GAME_DATA_FORMAT_SIGNED 2       /* [-l,0,+r] */
-#define GAME_DATA_FORMAT_BINARY 3       /* {-1,0,+1} */
-#define GAME_DATA_FORMAT_SCALED 4       /* [-10,+10] */
-
-// parameters defining the operation of the driver
-typedef struct
-{
-        USHORT                  useA;           /* new bitmasks: see above */
-        USHORT                  useB;
-        USHORT                  mode;           /* see consts above */
-        USHORT                  format;         /* see consts above */
-        USHORT                  sampDiv;        /* samp freq = 32 / n */
-        USHORT                  scale;          /* scaling factor */
-        USHORT                  res1;           /* must be 0 */
-        USHORT                  res2;           /* must be 0 */
-}
-GAME_PARM_STRUCT;
-/****************************************************************************/
-
-/****************************************************************************/
-// calibration values for each axis:
-//      - upper limit on value to be considered in lower range
-//      - centre value
-//      - lower limit on value to be considered in upper range
-typedef struct
-{
-        GAME_3POS_STRUCT        Ax;
-        GAME_3POS_STRUCT        Ay;
-        GAME_3POS_STRUCT        Bx;
-        GAME_3POS_STRUCT        By;
-}
-GAME_CALIB_STRUCT;
-/****************************************************************************/
-
-/****************************************************************************/
-// struct defining the digital response values for all axes
-typedef struct
-{
-        GAME_3POS_STRUCT        Ax;
-        GAME_3POS_STRUCT        Ay;
-        GAME_3POS_STRUCT        Bx;
-        GAME_3POS_STRUCT        By;
-}
-GAME_DIGSET_STRUCT;
-/****************************************************************************/
-
-#endif