view src/timer/wince/SDL_systimer.c @ 4447:947201caa46e

Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian
author Eric Wing <ewing . public |-at-| gmail . com>
date Sat, 08 May 2010 00:54:22 -0700
parents f7b03b6838cb
children 327f181542f1
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2010 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#ifdef SDL_TIMER_WINCE

#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <mmsystem.h>

#include "SDL_thread.h"
#include "SDL_timer.h"
#include "../SDL_timer_c.h"

static Uint64 start_date;
static Uint64 start_ticks;

static Uint64
wce_ticks(void)
{
    return ((Uint64) GetTickCount());
}

static Uint64
wce_date(void)
{
    union
    {
        FILETIME ftime;
        Uint64 itime;
    } ftime;
    SYSTEMTIME stime;

    GetSystemTime(&stime);
    SystemTimeToFileTime(&stime, &ftime.ftime);
    ftime.itime /= 10000;       // Convert 100ns intervals to 1ms intervals
    // Remove ms portion, which can't be relied on
    ftime.itime -= (ftime.itime % 1000);
    return (ftime.itime);
}

static Sint32
wce_rel_ticks(void)
{
    return ((Sint32) (wce_ticks() - start_ticks));
}

static Sint32
wce_rel_date(void)
{
    return ((Sint32) (wce_date() - start_date));
}

/* Return time in ms relative to when SDL was started */
Uint32
SDL_GetTicks()
{
    Sint32 offset = wce_rel_date() - wce_rel_ticks();
    if ((offset < -1000) || (offset > 1000)) {
//    fprintf(stderr,"Time desync(%+d), resyncing\n",offset/1000);
        start_ticks -= offset;
    }

    return ((Uint32) wce_rel_ticks());
}

/* Give up approx. givem milliseconds to the OS. */
void
SDL_Delay(Uint32 ms)
{
    Sleep(ms);
}

/* Recard start-time of application for reference */
void
SDL_StartTicks(void)
{
    start_date = wce_date();
    start_ticks = wce_ticks();
}

static UINT WIN_timer;

#if ( _WIN32_WCE <= 420 )

static HANDLE timersThread = 0;
static HANDLE timersQuitEvent = 0;

DWORD
TimersThreadProc(void *data)
{
    while (WaitForSingleObject(timersQuitEvent, 10) == WAIT_TIMEOUT) {
        SDL_ThreadedTimerCheck();
    }
    return 0;
}

int
SDL_SYS_TimerInit(void)
{
    // create a thread to process a threaded timers
    // SetTimer does not suit the needs because 
    // TimerCallbackProc will be called only when WM_TIMER occured

    timersQuitEvent = CreateEvent(0, TRUE, FALSE, 0);
    if (!timersQuitEvent) {
        SDL_SetError("Cannot create event for timers thread");
        return -1;
    }
    timersThread = CreateThread(NULL, 0, TimersThreadProc, 0, 0, 0);
    if (!timersThread) {
        SDL_SetError
            ("Cannot create timers thread, check amount of RAM available");
        return -1;
    }
    SetThreadPriority(timersThread, THREAD_PRIORITY_HIGHEST);

    return (SDL_SetTimerThreaded(1));
}

void
SDL_SYS_TimerQuit(void)
{
    SetEvent(timersQuitEvent);
    if (WaitForSingleObject(timersThread, 2000) == WAIT_TIMEOUT)
        TerminateThread(timersThread, 0);
    CloseHandle(timersThread);
    CloseHandle(timersQuitEvent);
    return;
}

#else

#pragma comment(lib, "mmtimer.lib")

/* Data to handle a single periodic alarm */
static UINT timerID = 0;

static void CALLBACK
HandleAlarm(UINT uID, UINT uMsg, DWORD dwUser, DWORD dw1, DWORD dw2)
{
    SDL_ThreadedTimerCheck();
}


int
SDL_SYS_TimerInit(void)
{
    MMRESULT result;

    /* Set timer resolution */
    result = timeBeginPeriod(TIMER_RESOLUTION);
    if (result != TIMERR_NOERROR) {
        SDL_SetError("Warning: Can't set %d ms timer resolution",
                     TIMER_RESOLUTION);
    }
    /* Allow 10 ms of drift so we don't chew on CPU */
    timerID =
        timeSetEvent(TIMER_RESOLUTION, 1, HandleAlarm, 0, TIME_PERIODIC);
    if (!timerID) {
        SDL_SetError("timeSetEvent() failed");
        return (-1);
    }
    return (SDL_SetTimerThreaded(1));
}

void
SDL_SYS_TimerQuit(void)
{
    if (timerID) {
        timeKillEvent(timerID);
    }
    timeEndPeriod(TIMER_RESOLUTION);
}

#endif

int
SDL_SYS_StartTimer(void)
{
    SDL_SetError("Internal logic error: WinCE uses threaded timer");
    return (-1);
}

void
SDL_SYS_StopTimer(void)
{
    return;
}

#endif /* SDL_TIMER_WINCE */
/* vi: set ts=4 sw=4 expandtab: */