Mercurial > sdl-ios-xcode
annotate include/SDL_audio.h @ 1295:c3e36ac8a94c
Date: Sun, 6 Mar 2005 17:06:20 +0100
From: Per Inge Mathisen
Subject: [SDL] Fullscreen refresh on win32
Windows has a terrible default for fullscreen 3D apps of 60mhz refresh
rate. This can be fixed by the user by going into his driver's
control panel and forcing the refresh rate higher. However, this not a
very user friendly way about it, and in any case SDL contains no code
that could figure out this that condition has afflicted the user.
So the question is, could SDL fix this for the user? It is possible
under Windows to request a higher refresh rate. The danger is of
course that if the user has an old monitor, and you request a too high
refresh rate, the monitor could be damaged. However, I believe there
might be a way around that: Check before switching what refresh rate
the user's desktop runs in, and if our fullscreen dimensions are equal
or less than those of the desktop, use the higher refresh rate of 60
and the desktop rate.
Since most users run their desktops in the same or higher resolution
something sane, this should fix this problem for most users.
Thoughts?
An alternative is to add an SDL_GL_GetAttribute(SDL_GL_REFRESH_RATE)
option so that programs can bitch at their users at their own
convenience.
- Per
| author | Sam Lantinga <slouken@libsdl.org> |
|---|---|
| date | Mon, 30 Jan 2006 06:56:10 +0000 |
| parents | 02759105b989 |
| children | c9b51268668f |
| rev | line source |
|---|---|
| 0 | 1 /* |
| 2 SDL - Simple DirectMedia Layer | |
|
769
b8d311d90021
Updated copyright information for 2004 (Happy New Year!)
Sam Lantinga <slouken@libsdl.org>
parents:
337
diff
changeset
|
3 Copyright (C) 1997-2004 Sam Lantinga |
| 0 | 4 |
| 5 This library is free software; you can redistribute it and/or | |
| 6 modify it under the terms of the GNU Library General Public | |
| 7 License as published by the Free Software Foundation; either | |
| 8 version 2 of the License, or (at your option) any later version. | |
| 9 | |
| 10 This library is distributed in the hope that it will be useful, | |
| 11 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| 13 Library General Public License for more details. | |
| 14 | |
| 15 You should have received a copy of the GNU Library General Public | |
| 16 License along with this library; if not, write to the Free | |
| 17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| 18 | |
| 19 Sam Lantinga | |
|
251
b8688cfdc232
Updated the headers with the correct e-mail address
Sam Lantinga <slouken@libsdl.org>
parents:
188
diff
changeset
|
20 slouken@libsdl.org |
| 0 | 21 */ |
| 22 | |
| 23 #ifdef SAVE_RCSID | |
| 24 static char rcsid = | |
| 25 "@(#) $Id$"; | |
| 26 #endif | |
| 27 | |
| 28 /* Access to the raw audio mixing buffer for the SDL library */ | |
| 29 | |
| 30 #ifndef _SDL_audio_h | |
| 31 #define _SDL_audio_h | |
| 32 | |
| 33 #include <stdio.h> | |
| 34 | |
| 35 #include "SDL_main.h" | |
| 36 #include "SDL_types.h" | |
| 37 #include "SDL_error.h" | |
| 38 #include "SDL_rwops.h" | |
| 39 #include "SDL_byteorder.h" | |
| 40 | |
| 41 #include "begin_code.h" | |
| 42 /* Set up for C function definitions, even when using C++ */ | |
| 43 #ifdef __cplusplus | |
| 44 extern "C" { | |
| 45 #endif | |
| 46 | |
| 47 /* The calculated values in this structure are calculated by SDL_OpenAudio() */ | |
|
911
04a403e4ccf5
Date: Mon, 3 May 2004 03:15:01 +0100
Sam Lantinga <slouken@libsdl.org>
parents:
769
diff
changeset
|
48 typedef struct SDL_AudioSpec { |
| 0 | 49 int freq; /* DSP frequency -- samples per second */ |
| 50 Uint16 format; /* Audio data format */ | |
| 51 Uint8 channels; /* Number of channels: 1 mono, 2 stereo */ | |
| 52 Uint8 silence; /* Audio buffer silence value (calculated) */ | |
| 188 | 53 Uint16 samples; /* Audio buffer size in samples (power of 2) */ |
| 0 | 54 Uint16 padding; /* Necessary for some compile environments */ |
| 55 Uint32 size; /* Audio buffer size in bytes (calculated) */ | |
| 56 /* This function is called when the audio device needs more data. | |
| 57 'stream' is a pointer to the audio data buffer | |
| 58 'len' is the length of that buffer in bytes. | |
| 59 Once the callback returns, the buffer will no longer be valid. | |
| 60 Stereo samples are stored in a LRLRLR ordering. | |
| 61 */ | |
|
930
02759105b989
Date: Fri, 20 Aug 2004 08:31:20 +0200
Sam Lantinga <slouken@libsdl.org>
parents:
911
diff
changeset
|
62 void (SDLCALL *callback)(void *userdata, Uint8 *stream, int len); |
| 0 | 63 void *userdata; |
| 64 } SDL_AudioSpec; | |
| 65 | |
| 66 /* Audio format flags (defaults to LSB byte order) */ | |
| 67 #define AUDIO_U8 0x0008 /* Unsigned 8-bit samples */ | |
| 68 #define AUDIO_S8 0x8008 /* Signed 8-bit samples */ | |
| 69 #define AUDIO_U16LSB 0x0010 /* Unsigned 16-bit samples */ | |
| 70 #define AUDIO_S16LSB 0x8010 /* Signed 16-bit samples */ | |
| 71 #define AUDIO_U16MSB 0x1010 /* As above, but big-endian byte order */ | |
| 72 #define AUDIO_S16MSB 0x9010 /* As above, but big-endian byte order */ | |
| 73 #define AUDIO_U16 AUDIO_U16LSB | |
| 74 #define AUDIO_S16 AUDIO_S16LSB | |
| 75 | |
| 76 /* Native audio byte ordering */ | |
| 77 #if SDL_BYTEORDER == SDL_LIL_ENDIAN | |
| 78 #define AUDIO_U16SYS AUDIO_U16LSB | |
| 79 #define AUDIO_S16SYS AUDIO_S16LSB | |
| 80 #else | |
| 81 #define AUDIO_U16SYS AUDIO_U16MSB | |
| 82 #define AUDIO_S16SYS AUDIO_S16MSB | |
| 83 #endif | |
| 84 | |
| 85 | |
| 86 /* A structure to hold a set of audio conversion filters and buffers */ | |
| 87 typedef struct SDL_AudioCVT { | |
| 88 int needed; /* Set to 1 if conversion possible */ | |
| 89 Uint16 src_format; /* Source audio format */ | |
| 90 Uint16 dst_format; /* Target audio format */ | |
| 91 double rate_incr; /* Rate conversion increment */ | |
| 92 Uint8 *buf; /* Buffer to hold entire audio data */ | |
| 93 int len; /* Length of original audio buffer */ | |
| 94 int len_cvt; /* Length of converted audio buffer */ | |
| 95 int len_mult; /* buffer must be len*len_mult big */ | |
| 96 double len_ratio; /* Given len, final size is len*len_ratio */ | |
|
930
02759105b989
Date: Fri, 20 Aug 2004 08:31:20 +0200
Sam Lantinga <slouken@libsdl.org>
parents:
911
diff
changeset
|
97 void (SDLCALL *filters[10])(struct SDL_AudioCVT *cvt, Uint16 format); |
| 0 | 98 int filter_index; /* Current audio conversion function */ |
| 99 } SDL_AudioCVT; | |
| 100 | |
| 101 | |
| 102 /* Function prototypes */ | |
| 103 | |
| 104 /* These functions are used internally, and should not be used unless you | |
| 105 * have a specific need to specify the audio driver you want to use. | |
| 106 * You should normally use SDL_Init() or SDL_InitSubSystem(). | |
| 107 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
108 extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); |
|
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
109 extern DECLSPEC void SDLCALL SDL_AudioQuit(void); |
| 0 | 110 |
| 111 /* This function fills the given character buffer with the name of the | |
| 112 * current audio driver, and returns a pointer to it if the audio driver has | |
| 113 * been initialized. It returns NULL if no driver has been initialized. | |
| 114 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
115 extern DECLSPEC char * SDLCALL SDL_AudioDriverName(char *namebuf, int maxlen); |
| 0 | 116 |
| 117 /* | |
| 118 * This function opens the audio device with the desired parameters, and | |
| 119 * returns 0 if successful, placing the actual hardware parameters in the | |
| 120 * structure pointed to by 'obtained'. If 'obtained' is NULL, the audio | |
| 121 * data passed to the callback function will be guaranteed to be in the | |
| 122 * requested format, and will be automatically converted to the hardware | |
| 123 * audio format if necessary. This function returns -1 if it failed | |
| 124 * to open the audio device, or couldn't set up the audio thread. | |
| 125 * | |
| 126 * When filling in the desired audio spec structure, | |
| 127 * 'desired->freq' should be the desired audio frequency in samples-per-second. | |
| 128 * 'desired->format' should be the desired audio format. | |
| 129 * 'desired->samples' is the desired size of the audio buffer, in samples. | |
| 130 * This number should be a power of two, and may be adjusted by the audio | |
| 131 * driver to a value more suitable for the hardware. Good values seem to | |
| 132 * range between 512 and 8096 inclusive, depending on the application and | |
| 133 * CPU speed. Smaller values yield faster response time, but can lead | |
| 134 * to underflow if the application is doing heavy processing and cannot | |
| 135 * fill the audio buffer in time. A stereo sample consists of both right | |
| 136 * and left channels in LR ordering. | |
| 137 * Note that the number of samples is directly related to time by the | |
| 138 * following formula: ms = (samples*1000)/freq | |
| 139 * 'desired->size' is the size in bytes of the audio buffer, and is | |
| 140 * calculated by SDL_OpenAudio(). | |
| 141 * 'desired->silence' is the value used to set the buffer to silence, | |
| 142 * and is calculated by SDL_OpenAudio(). | |
| 143 * 'desired->callback' should be set to a function that will be called | |
| 144 * when the audio device is ready for more data. It is passed a pointer | |
| 145 * to the audio buffer, and the length in bytes of the audio buffer. | |
| 146 * This function usually runs in a separate thread, and so you should | |
| 147 * protect data structures that it accesses by calling SDL_LockAudio() | |
| 148 * and SDL_UnlockAudio() in your code. | |
| 149 * 'desired->userdata' is passed as the first parameter to your callback | |
| 150 * function. | |
| 151 * | |
| 152 * The audio device starts out playing silence when it's opened, and should | |
| 153 * be enabled for playing by calling SDL_PauseAudio(0) when you are ready | |
| 154 * for your audio callback function to be called. Since the audio driver | |
| 155 * may modify the requested size of the audio buffer, you should allocate | |
| 156 * any local mixing buffers after you open the audio device. | |
| 157 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
158 extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec *desired, SDL_AudioSpec *obtained); |
| 0 | 159 |
| 160 /* | |
| 161 * Get the current audio state: | |
| 162 */ | |
| 163 typedef enum { | |
| 164 SDL_AUDIO_STOPPED = 0, | |
| 165 SDL_AUDIO_PLAYING, | |
| 166 SDL_AUDIO_PAUSED | |
| 167 } SDL_audiostatus; | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
168 extern DECLSPEC SDL_audiostatus SDLCALL SDL_GetAudioStatus(void); |
| 0 | 169 |
| 170 /* | |
| 171 * This function pauses and unpauses the audio callback processing. | |
| 172 * It should be called with a parameter of 0 after opening the audio | |
| 173 * device to start playing sound. This is so you can safely initialize | |
| 174 * data for your callback function after opening the audio device. | |
| 175 * Silence will be written to the audio device during the pause. | |
| 176 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
177 extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); |
| 0 | 178 |
| 179 /* | |
| 180 * This function loads a WAVE from the data source, automatically freeing | |
| 181 * that source if 'freesrc' is non-zero. For example, to load a WAVE file, | |
| 182 * you could do: | |
| 183 * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...); | |
| 184 * | |
| 185 * If this function succeeds, it returns the given SDL_AudioSpec, | |
| 186 * filled with the audio data format of the wave data, and sets | |
| 187 * 'audio_buf' to a malloc()'d buffer containing the audio data, | |
| 188 * and sets 'audio_len' to the length of that audio buffer, in bytes. | |
| 189 * You need to free the audio buffer with SDL_FreeWAV() when you are | |
| 190 * done with it. | |
| 191 * | |
| 192 * This function returns NULL and sets the SDL error message if the | |
| 193 * wave file cannot be opened, uses an unknown data format, or is | |
| 194 * corrupt. Currently raw and MS-ADPCM WAVE files are supported. | |
| 195 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
196 extern DECLSPEC SDL_AudioSpec * SDLCALL SDL_LoadWAV_RW(SDL_RWops *src, int freesrc, SDL_AudioSpec *spec, Uint8 **audio_buf, Uint32 *audio_len); |
| 0 | 197 |
| 198 /* Compatibility convenience function -- loads a WAV from a file */ | |
| 199 #define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ | |
| 200 SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) | |
| 201 | |
| 202 /* | |
| 203 * This function frees data previously allocated with SDL_LoadWAV_RW() | |
| 204 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
205 extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 *audio_buf); |
| 0 | 206 |
| 207 /* | |
| 208 * This function takes a source format and rate and a destination format | |
| 209 * and rate, and initializes the 'cvt' structure with information needed | |
| 210 * by SDL_ConvertAudio() to convert a buffer of audio data from one format | |
| 211 * to the other. | |
| 212 * This function returns 0, or -1 if there was an error. | |
| 213 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
214 extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT *cvt, |
| 0 | 215 Uint16 src_format, Uint8 src_channels, int src_rate, |
| 216 Uint16 dst_format, Uint8 dst_channels, int dst_rate); | |
| 217 | |
| 218 /* Once you have initialized the 'cvt' structure using SDL_BuildAudioCVT(), | |
| 219 * created an audio buffer cvt->buf, and filled it with cvt->len bytes of | |
| 220 * audio data in the source format, this function will convert it in-place | |
| 221 * to the desired format. | |
| 222 * The data conversion may expand the size of the audio data, so the buffer | |
| 223 * cvt->buf should be allocated after the cvt structure is initialized by | |
| 224 * SDL_BuildAudioCVT(), and should be cvt->len*cvt->len_mult bytes long. | |
| 225 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
226 extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT *cvt); |
| 0 | 227 |
| 228 /* | |
| 229 * This takes two audio buffers of the playing audio format and mixes | |
| 230 * them, performing addition, volume adjustment, and overflow clipping. | |
| 231 * The volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME | |
| 232 * for full audio volume. Note this does not change hardware volume. | |
| 233 * This is provided for convenience -- you can mix your own audio data. | |
| 234 */ | |
| 235 #define SDL_MIX_MAXVOLUME 128 | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
236 extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 *dst, const Uint8 *src, Uint32 len, int volume); |
| 0 | 237 |
| 238 /* | |
| 239 * The lock manipulated by these functions protects the callback function. | |
| 240 * During a LockAudio/UnlockAudio pair, you can be guaranteed that the | |
| 241 * callback function is not running. Do not call these from the callback | |
| 242 * function or you will cause deadlock. | |
| 243 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
244 extern DECLSPEC void SDLCALL SDL_LockAudio(void); |
|
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
245 extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); |
| 0 | 246 |
| 247 /* | |
| 248 * This function shuts down audio processing and closes the audio device. | |
| 249 */ | |
|
337
9154ec9ca3d2
Explicitly specify the SDL API calling convention (C by default)
Sam Lantinga <slouken@libsdl.org>
parents:
297
diff
changeset
|
250 extern DECLSPEC void SDLCALL SDL_CloseAudio(void); |
| 0 | 251 |
| 252 | |
| 253 /* Ends C function definitions when using C++ */ | |
| 254 #ifdef __cplusplus | |
| 255 } | |
| 256 #endif | |
| 257 #include "close_code.h" | |
| 258 | |
| 259 #endif /* _SDL_audio_h */ |