Mercurial > sdl-ios-xcode

changeset 1585:980d2a0dc2a3

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents b786d9c15e42
children 4d1d3d5393b1
files src/video/fbcon/SDL_fbevents.c src/video/fbcon/SDL_fbvideo.c
diffstat 2 files changed, 57 insertions(+), 19 deletions(-) [+]
line wrap: on
line diff
--- a/src/video/fbcon/SDL_fbevents.c	Wed Mar 22 07:22:40 2006 +0000
+++ b/src/video/fbcon/SDL_fbevents.c	Wed Mar 22 07:48:22 2006 +0000
@@ -505,7 +505,7 @@
 	mouse_fd = -1;
 
 #if SDL_INPUT_TSLIB
-	if ((mousedrv != NULL) && (SDL_strcmp(mousedrv, "TSLIB") == 0)) {
+	if ( mousedrv && (SDL_strcmp(mousedrv, "TSLIB") == 0) ) {
 		if (mousedev == NULL) mousedev = SDL_getenv("TSLIB_TSDEVICE");
 		if (mousedev != NULL) {
 			ts_dev = ts_open(mousedev, 1);
@@ -525,7 +525,7 @@
 
 	/* ELO TOUCHSCREEN SUPPORT */
 
-	if( (mousedrv != NULL) && (SDL_strcmp(mousedrv, "ELO") == 0) ) {
+	if ( mousedrv && (SDL_strcmp(mousedrv, "ELO") == 0) ) {
 		mouse_fd = open(mousedev, O_RDWR);
 		if ( mouse_fd >= 0 ) {
 			if(eloInitController(mouse_fd)) {
@@ -616,10 +616,17 @@
 			mouse_termios.c_cflag |= CS8;
 			mouse_termios.c_cflag |= B1200;
 			tcsetattr(mouse_fd, TCSAFLUSH, &mouse_termios);
+			if ( mousedrv && (SDL_strcmp(mousedrv, "PS2") == 0) ) {
 #ifdef DEBUG_MOUSE
-fprintf(stderr, "Using Microsoft mouse on %s\n", mousedev);
+fprintf(stderr, "Using (user specified) PS2 mouse on %s\n", mousedev);
 #endif
-			mouse_drv = MOUSE_MS;
+				mouse_drv = MOUSE_PS2;
+			} else {
+#ifdef DEBUG_MOUSE
+fprintf(stderr, "Using (default) MS mouse on %s\n", mousedev);
+#endif
+				mouse_drv = MOUSE_MS;
+			}
 		}
 	}
 	if ( mouse_fd < 0 ) {
@@ -856,10 +863,10 @@
 	struct fb_var_screeninfo vinfo;
 	struct vt_stat vtstate;
 	unsigned short v_active;
+	__u16 saved_pal[3*256];
 	SDL_Surface *screen;
-	__u16 saved_pal[3*256];
 	Uint32 screen_arealen;
-	Uint8 *screen_contents;
+	Uint8 *screen_contents = NULL;
 
 	/* Figure out whether or not we're switching to a new console */
 	if ( (ioctl(keyboard_fd, VT_GETSTATE, &vtstate) < 0) ||
@@ -872,10 +879,12 @@
 	SDL_mutexP(hw_lock);
 	wait_idle(this);
 	screen = SDL_VideoSurface;
-	screen_arealen = (screen->h*screen->pitch);
-	screen_contents = (Uint8 *)SDL_malloc(screen_arealen);
-	if ( screen_contents ) {
-		SDL_memcpy(screen_contents, screen->pixels, screen_arealen);
+	if ( !SDL_ShadowSurface ) {
+		screen_arealen = (screen->h*screen->pitch);
+		screen_contents = (Uint8 *)SDL_malloc(screen_arealen);
+		if ( screen_contents ) {
+			SDL_memcpy(screen_contents, (Uint8 *)screen->pixels + screen->offset, screen_arealen);
+		}
 	}
 	FB_SavePaletteTo(this, 256, saved_pal);
 	ioctl(console_fd, FBIOGET_VSCREENINFO, &vinfo);
@@ -899,8 +908,10 @@
 	ioctl(console_fd, FBIOPUT_VSCREENINFO, &vinfo);
 	FB_RestorePaletteFrom(this, 256, saved_pal);
 	if ( screen_contents ) {
-		SDL_memcpy(screen->pixels, screen_contents, screen_arealen);
+		SDL_memcpy((Uint8 *)screen->pixels + screen->offset, screen_contents, screen_arealen);
 		SDL_free(screen_contents);
+	} else {
+		SDL_UpdateRect(screen, 0, 0, 0, 0);
 	}
 	SDL_mutexV(hw_lock);
 }
--- a/src/video/fbcon/SDL_fbvideo.c	Wed Mar 22 07:22:40 2006 +0000
+++ b/src/video/fbcon/SDL_fbvideo.c	Wed Mar 22 07:48:22 2006 +0000
@@ -30,6 +30,7 @@
 #include <sys/ioctl.h>
 #include <sys/mman.h>
 #include <asm/page.h>		/* For definition of PAGE_SIZE */
+#include <linux/vt.h>
 
 #include "SDL_video.h"
 #include "SDL_mouse.h"
@@ -153,15 +154,21 @@
 static int FB_Available(void)
 {
 	int console;
-	const char *SDL_fbdev;
+	/* Added check for /fb/0 (devfs) */
+	/* but - use environment variable first... if it fails, still check defaults */
+	int idx = 0;
+	const char *SDL_fbdevs[4] = { NULL, "/dev/fb0", "/dev/fb/0", NULL };
 
-	SDL_fbdev = SDL_getenv("SDL_FBDEV");
-	if ( SDL_fbdev == NULL ) {
-		SDL_fbdev = "/dev/fb0";
-	}
-	console = open(SDL_fbdev, O_RDWR, 0);
-	if ( console >= 0 ) {
-		close(console);
+	SDL_fbdevs[0] = SDL_getenv("SDL_FBDEV");
+	if( !SDL_fbdevs[0] )
+		idx++;
+	for( ; SDL_fbdevs[idx]; idx++ )
+	{
+		console = open(SDL_fbdevs[idx], O_RDWR, 0);
+		if ( console >= 0 ) {
+			close(console);
+			break;
+		}
 	}
 	return(console >= 0);
 }
@@ -1230,8 +1237,28 @@
 	surface->pixels = NULL;
 	surface->hwdata = NULL;
 }
+
+/* Routine to check to see if the frame buffer virtual terminal */
+/* is the current(active) one.  If it is not, result will cause */
+/* Lock to fail.  (would have waited forever, since the fbevent */
+/* keyboard handler maintains a lock when switched away from    */
+/* current) */
+static __inline__ int FB_IsFrameBufferActive(_THIS)
+{
+	struct vt_stat vtstate;
+	if ( (ioctl(keyboard_fd, VT_GETSTATE, &vtstate) < 0) ||
+	     (current_vt != vtstate.v_active) ) {
+		return 0;
+	}
+	return 1;
+}
+
+
 static int FB_LockHWSurface(_THIS, SDL_Surface *surface)
 {
+	if ( !FB_IsFrameBufferActive(this) ) {
+		return -1; /* fail locking. */
+	}
 	if ( surface == this->screen ) {
 		SDL_mutexP(hw_lock);
 		if ( FB_IsSurfaceBusy(surface) ) {