view test/testgamma.c @ 1029:f87f87efd45a

Date: Mon, 17 Jan 2005 20:54:50 +0200 From: Ville [snip] Subject: [PATCH] SDL/DirectFB: remove Matrox CRTC2 flicker filter Hi, This patch removes the flicker filter option from the DirectFB backend's Matrox CRTC2 code in SDL. I will be removing the option from DirectFB (because it doesn't actually work) and that would cause the SDL code to fail without this fix. I was going to send this to some SDL list directly but libsdl.org is down so I'm not sure what if any lists there are. Thomas Jarosch (the guy who wrote the code) said you would accept SDL patches. Let me know if I should send this somewhere else. -- Ville Syrj�l� syrjala _at sci.fi http://www.sci.fi/~syrjala/
author Ryan C. Gordon <icculus@icculus.org>
date Mon, 17 Jan 2005 19:38:28 +0000
parents 74212992fb08
children be9c9c8f6d53
line wrap: on
line source


/* Bring up a window and manipulate the gamma on it */

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>

#include "SDL.h"

/* Turn a normal gamma value into an appropriate gamma ramp */
void CalculateGamma(double gamma, Uint16 *ramp)
{
	int i, value;

	gamma = 1.0 / gamma;
	for ( i=0; i<256; ++i ) {
		value = (int)(pow((double)i/256.0, gamma)*65535.0 + 0.5);
		if ( value > 65535 ) {
			value = 65535;
		}
		ramp[i] = (Uint16)value;
	}
}

/* This can be used as a general routine for all of the test programs */
int get_video_args(char *argv[], int *w, int *h, int *bpp, Uint32 *flags)
{
	int i;

	*w = 640;
	*h = 480;
	*bpp = 0;
	*flags = SDL_SWSURFACE;

	for ( i=1; argv[i]; ++i ) {
		if ( strcmp(argv[i], "-width") == 0 ) {
			if ( argv[i+1] ) {
				*w = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-height") == 0 ) {
			if ( argv[i+1] ) {
				*h = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-bpp") == 0 ) {
			if ( argv[i+1] ) {
				*bpp = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-fullscreen") == 0 ) {
			*flags |= SDL_FULLSCREEN;
		} else
		if ( strcmp(argv[i], "-hw") == 0 ) {
			*flags |= SDL_HWSURFACE;
		} else
		if ( strcmp(argv[i], "-hwpalette") == 0 ) {
			*flags |= SDL_HWPALETTE;
		} else
			break;
	}
	return i;
}

int main(int argc, char *argv[])
{
	SDL_Surface *screen;
	SDL_Surface *image;
	float gamma;
	int i;
	int w, h, bpp;
	Uint32 flags;
	Uint16 ramp[256];
	Uint16 red_ramp[256];
	Uint32 then, timeout;

	/* Check command line arguments */
	argv += get_video_args(argv, &w, &h, &bpp, &flags);

	/* Initialize SDL */
	if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) {
		fprintf(stderr,
			"Couldn't initialize SDL: %s\n", SDL_GetError());
		exit(1);
	}
	atexit(SDL_Quit);

	/* Initialize the display, always use hardware palette */
	screen = SDL_SetVideoMode(w, h, bpp, flags | SDL_HWPALETTE);
	if ( screen == NULL ) {
		fprintf(stderr, "Couldn't set %dx%d video mode: %s\n",
						w, h, SDL_GetError());
		exit(1);
	}

	/* Set the window manager title bar */
	SDL_WM_SetCaption("SDL gamma test", "testgamma");

	/* Set the desired gamma, if any */
	gamma = 1.0f;
	if ( *argv ) {
		gamma = (float)atof(*argv);
	}
	if ( SDL_SetGamma(gamma, gamma, gamma) < 0 ) {
		fprintf(stderr, "Unable to set gamma: %s\n", SDL_GetError());
		exit(1);
	}

#if 0 /* This isn't supported.  Integrating the gamma ramps isn't exact */
	/* See what gamma was actually set */
	float real[3];
	if ( SDL_GetGamma(&real[0], &real[1], &real[2]) < 0 ) {
		printf("Couldn't get gamma: %s\n", SDL_GetError());
	} else {
		printf("Set gamma values: R=%2.2f, G=%2.2f, B=%2.2f\n",
			real[0], real[1], real[2]);
	}
#endif

	/* Do all the drawing work */
	image = SDL_LoadBMP("sample.bmp");
	if ( image ) {
		SDL_Rect dst;

		dst.x = (screen->w - image->w)/2;
		dst.y = (screen->h - image->h)/2;
		dst.w = image->w;
		dst.h = image->h;
		SDL_BlitSurface(image, NULL, screen, &dst);
		SDL_UpdateRects(screen, 1, &dst);
	}

	/* Wait a bit, handling events */
	then = SDL_GetTicks();
	timeout = (5*1000);
	while ( (SDL_GetTicks()-then) < timeout ) {
		SDL_Event event;

		while ( SDL_PollEvent(&event) ) {
			switch (event.type) {
			    case SDL_QUIT:	/* Quit now */
				timeout = 0;
				break;
			    case SDL_KEYDOWN:
				switch (event.key.keysym.sym) {
				    case SDLK_SPACE:	/* Go longer.. */
					timeout += (5*1000);
					break;
				    case SDLK_UP:
					gamma += 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_DOWN:
					gamma -= 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_ESCAPE:
					timeout = 0;
					break;
				    default:
					break;
				}
				break;
			}
		}
	}

	/* Perform a gamma flash to red using color ramps */
	while ( gamma < 10.0 ) {
		/* Increase the red gamma and decrease everything else... */
		gamma += 0.1f;
		CalculateGamma(gamma, red_ramp);
		CalculateGamma(1.0/gamma, ramp);
		SDL_SetGammaRamp(red_ramp, ramp, ramp);
	}
	/* Finish completely red */
	memset(red_ramp, 255, sizeof(red_ramp));
	memset(ramp, 0, sizeof(ramp));
	SDL_SetGammaRamp(red_ramp, ramp, ramp);

	/* Now fade out to black */
	for ( i=(red_ramp[0] >> 8); i >= 0; --i ) {
		memset(red_ramp, i, sizeof(red_ramp));
		SDL_SetGammaRamp(red_ramp, NULL, NULL);
	}
	SDL_Delay(1*1000);

	return(0);
}