/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2009 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#ifndef _3DFX_REGS_H
#define _3DFX_REGS_H

/* This information comes from the public 3Dfx specs for the Voodoo 3000 */

/* mapped_io register offsets */
#define TDFX_STATUS	0x00

#define INTCTRL		(0x00100000 + 0x04)
#define CLIP0MIN	(0x00100000 + 0x08)
#define CLIP0MAX	(0x00100000 + 0x0c)
#define DSTBASE		(0x00100000 + 0x10)
#define DSTFORMAT	(0x00100000 + 0x14)
#define SRCCOLORKEYMIN	(0x00100000 + 0x18)
#define SRCCOLORKEYMAX	(0x00100000 + 0x1c)
#define DSTCOLORKEYMIN	(0x00100000 + 0x20)
#define DSTCOLORKEYMAX	(0x00100000 + 0x24)
#define BRESERROR0	(0x00100000 + 0x28)
#define BRESERROR1	(0x00100000 + 0x2c)
#define ROP_2D		(0x00100000 + 0x30)
#define SRCBASE		(0x00100000 + 0x34)
#define COMMANDEXTRA_2D	(0x00100000 + 0x38)
#define PATTERN0	(0x00100000 + 0x44)
#define PATTERN1	(0x00100000 + 0x48)
#define CLIP1MIN	(0x00100000 + 0x4c)
#define CLIP1MAX	(0x00100000 + 0x50)
#define SRCFORMAT	(0x00100000 + 0x54)
#define SRCSIZE		(0x00100000 + 0x58)
#define SRCXY		(0x00100000 + 0x5c)
#define COLORBACK	(0x00100000 + 0x60)
#define COLORFORE	(0x00100000 + 0x64)
#define DSTSIZE		(0x00100000 + 0x68)
#define DSTXY		(0x00100000 + 0x6c)
#define COMMAND_2D	(0x00100000 + 0x70)
#define LAUNCH_2D	(0x00100000 + 0x80)
#define PATTERNBASE	(0x00100000 + 0x100)

#define COMMAND_3D	(0x00200000 + 0x120)

/* register bitfields (not all, only as needed) */

#define BIT(x) (1UL << (x))

#define COMMAND_2D_BITBLT		0x01
#define COMMAND_2D_FILLRECT		0x05
#define COMMAND_2D_LINE			0x06
#define COMMAND_2D_POLYGON_FILL		0x08
#define COMMAND_2D_INITIATE		BIT(8)
#define COMMAND_2D_REVERSELINE		BIT(9)
#define COMMAND_2D_STIPPLELINE		BIT(12)
#define COMMAND_2D_MONOCHROME_PATT	BIT(13)
#define COMMAND_2D_MONOCHROME_TRANSP    BIT(16)

#define COMMAND_3D_NOP			0x00

#define STATUS_RETRACE			BIT(6)
#define STATUS_BUSY			BIT(9)

#endif /* _3DFX_REGS_H */
/* vi: set ts=4 sw=4 expandtab: */