view build-scripts/fatbuild.sh @ 4179:d7294b7c732d SDL-1.2

Date: Fri, 24 Apr 2009 17:47:07 +0200 From: Stefan Klug Subject: Re: [SDL] SVN doesn't compile for wince the patch applied for Revision 4483 was seemingly not checked for side effects. It broke the WinCE build. The attached patch should fix these problems. I'm not using SDL 1.2 on CE anymore, and therefore haven't tested the patch... but at least it compiles ;-) Regards Stefan
author Sam Lantinga <slouken@libsdl.org>
date Thu, 07 May 2009 12:40:16 +0000
parents 3e7f2edce658
children 6f74b80cca1d
line wrap: on
line source

#!/bin/sh
#
# Build a fat binary on Mac OS X, thanks Ryan!

# Number of CPUs (for make -j)
NCPU=`sysctl -n hw.ncpu`
NJOB=$NCPU
#NJOB=`expr $NCPU + 1`

# Generic, cross-platform CFLAGS you always want go here.
CFLAGS="-O3 -g -pipe"

# Locate Xcode SDK path
SDK_PATH=/Developer/SDKs
if [ ! -d $SDK_PATH ]; then
    echo "Couldn't find SDK path"
    exit 1
fi

# See if we can use 10.2 or 10.3 runtime compatibility
if [ -d "$SDK_PATH/MacOSX10.2.8.sdk" ]; then
    # PowerPC configure flags (10.2 runtime compatibility)
    # We dynamically load X11, so using the system X11 headers is fine.
    CONFIG_PPC="--build=`uname -p`-apple-darwin --host=powerpc-apple-darwin \
--x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib"

    # PowerPC compiler flags
    CC_PPC="gcc-3.3 -arch ppc"
    CXX_PPC="g++-3.3 -arch ppc"
    CFLAGS_PPC=""
    CPPFLAGS_PPC="-DMAC_OS_X_VERSION_MIN_REQUIRED=1020 \
-nostdinc \
-F$SDK_PATH/MacOSX10.2.8.sdk/System/Library/Frameworks \
-I$SDK_PATH/MacOSX10.2.8.sdk/usr/include/gcc/darwin/3.3 \
-isystem $SDK_PATH/MacOSX10.2.8.sdk/usr/include"

    # PowerPC linker flags 
    LFLAGS_PPC="-Wl,-headerpad_max_install_names -arch ppc \
-L$SDK_PATH/MacOSX10.2.8.sdk/usr/lib/gcc/darwin/3.3 \
-F$SDK_PATH/MacOSX10.2.8.sdk/System/Library/Frameworks \
-Wl,-syslibroot,$SDK_PATH/MacOSX10.2.8.sdk"

else # 10.2 or 10.3 SDK

    # PowerPC configure flags (10.3 runtime compatibility)
    # We dynamically load X11, so using the system X11 headers is fine.
    CONFIG_PPC="--build=`uname -p`-apple-darwin --host=powerpc-apple-darwin \
--x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib"

    # PowerPC compiler flags
    CC_PPC="gcc-4.0 -arch ppc"
    CXX_PPC="g++-4.0 -arch ppc"
    CFLAGS_PPC=""
    CPPFLAGS_PPC="-DMAC_OS_X_VERSION_MIN_REQUIRED=1030 \
-nostdinc \
-F$SDK_PATH/MacOSX10.3.9.sdk/System/Library/Frameworks \
-I$SDK_PATH/MacOSX10.3.9.sdk/usr/lib/gcc/powerpc-apple-darwin9/4.0.1/include \
-isystem $SDK_PATH/MacOSX10.3.9.sdk/usr/include"

    # PowerPC linker flags
    LFLAGS_PPC="-Wl,-headerpad_max_install_names -arch ppc -mmacosx-version-min=10.3 \
-L$SDK_PATH/MacOSX10.3.9.sdk/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 \
-F$SDK_PATH/MacOSX10.3.9.sdk/System/Library/Frameworks \
-Wl,-syslibroot,$SDK_PATH/MacOSX10.3.9.sdk"

fi # 10.2 or 10.3 SDK

# Intel configure flags (10.4 runtime compatibility)
# We dynamically load X11, so using the system X11 headers is fine.
CONFIG_X86="--build=`uname -p`-apple-darwin --host=i386-apple-darwin \
--x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib"

# Intel compiler flags
CC_X86="gcc-4.0 -arch i386"
CXX_X86="g++-4.0 -arch i386"
CFLAGS_X86="-mmacosx-version-min=10.4"
CPPFLAGS_X86="-DMAC_OS_X_VERSION_MIN_REQUIRED=1040 \
-nostdinc \
-F$SDK_PATH/MacOSX10.4u.sdk/System/Library/Frameworks \
-I$SDK_PATH/MacOSX10.4u.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1/include \
-isystem $SDK_PATH/MacOSX10.4u.sdk/usr/include"

# Intel linker flags
LFLAGS_X86="-Wl,-headerpad_max_install_names -arch i386 -mmacosx-version-min=10.4 \
-L$SDK_PATH/MacOSX10.4u.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1 \
-Wl,-syslibroot,$SDK_PATH/MacOSX10.4u.sdk"

#
# Find the configure script
#
srcdir=`dirname $0`/..
auxdir=$srcdir/build-scripts
cd $srcdir

#
# Figure out which phase to build:
# all,
# configure, configure-ppc, configure-x86,
# make, make-ppc, make-x86, merge
# install
# clean
if test x"$1" = x; then
    phase=all
else
    phase="$1"
fi
case $phase in
    all)
        configure_ppc="yes"
        configure_x86="yes"
        make_ppc="yes"
        make_x86="yes"
        merge="yes"
        ;;
    configure)
        configure_ppc="yes"
        configure_x86="yes"
        ;;
    configure-ppc)
        configure_ppc="yes"
        ;;
    configure-x86)
        configure_x86="yes"
        ;;
    make)
        make_ppc="yes"
        make_x86="yes"
        merge="yes"
        ;;
    make-ppc)
        make_ppc="yes"
        ;;
    make-x86)
        make_x86="yes"
        ;;
    merge)
        merge="yes"
        ;;
    install)
        install_bin="yes"
        install_hdrs="yes"
        install_lib="yes"
        install_data="yes"
        install_man="yes"
        ;;
    install-bin)
        install_bin="yes"
        ;;
    install-hdrs)
        install_hdrs="yes"
        ;;
    install-lib)
        install_lib="yes"
        ;;
    install-data)
        install_data="yes"
        ;;
    install-man)
        install_man="yes"
        ;;
    clean)
        clean_ppc="yes"
        clean_x86="yes"
        ;;
    clean-ppc)
        clean_ppc="yes"
        ;;
    clean-x86)
        clean_x86="yes"
        ;;
    *)
        echo "Usage: $0 [all|configure[-ppc|-x86]|make[-ppc|-x86]|merge|install|clean]"
        exit 1
        ;;
esac
case `uname -p` in
    powerpc)
        native_path=ppc
        ;;
    *86)
        native_path=x86
        ;;
    *)
        echo "Couldn't figure out native architecture path"
        exit 1
        ;;
esac

#
# Create the build directories
#
for dir in build build/ppc build/x86; do
    if test -d $dir; then
        :
    else
        mkdir $dir || exit 1
    fi
done

#
# Build the PowerPC binary
#
if test x$configure_ppc = xyes; then
    (cd build/ppc && \
     sh ../../configure $CONFIG_PPC CC="$CC_PPC" CXX="$CXX_PPC" CFLAGS="$CFLAGS $CFLAGS_PPC" CPPFLAGS="$CPPFLAGS_PPC" LDFLAGS="$LFLAGS_PPC") || exit 2
fi
if test x$make_ppc = xyes; then
    (cd build/ppc && ls include && make -j$NJOB) || exit 3
fi

#
# Build the Intel binary
#
if test x$configure_x86 = xyes; then
    (cd build/x86 && \
     sh ../../configure $CONFIG_X86 CC="$CC_X86" CXX="$CXX_X86" CFLAGS="$CFLAGS $CFLAGS_X86" CPPFLAGS="$CPPFLAGS_X86" LDFLAGS="$LFLAGS_X86") || exit 2
fi
if test x$make_x86 = xyes; then
    (cd build/x86 && make -j$NJOB) || exit 3
fi

#
# Combine into fat binary
#
if test x$merge = xyes; then
    output=.libs
    sh $auxdir/mkinstalldirs build/$output
    cd build
    target=`find . -mindepth 3 -type f -name '*.dylib' | head -1 | sed 's|.*/||'`
    (lipo -create -o $output/$target `find . -mindepth 3 -type f -name "*.dylib"` &&
     ln -sf $target $output/libSDL-1.2.0.dylib &&
     ln -sf $target $output/libSDL.dylib &&
     lipo -create -o $output/libSDL.a */build/.libs/libSDL.a &&
     cp $native_path/build/.libs/libSDL.la $output &&
     cp $native_path/build/.libs/libSDL.lai $output &&
     cp $native_path/build/libSDL.la . &&
     lipo -create -o libSDLmain.a */build/libSDLmain.a &&
     echo "Build complete!" &&
     echo "Files can be found in the build directory.") || exit 4
    cd ..
fi

#
# Install
#
do_install()
{
    echo $*
    $* || exit 5
}
if test x$prefix = x; then
    prefix=/usr/local
fi
if test x$exec_prefix = x; then
    exec_prefix=$prefix
fi
if test x$bindir = x; then
    bindir=$exec_prefix/bin
fi
if test x$libdir = x; then
    libdir=$exec_prefix/lib
fi
if test x$includedir = x; then
    includedir=$prefix/include
fi
if test x$datadir = x; then
    datadir=$prefix/share
fi
if test x$mandir = x; then
    mandir=$prefix/man
fi
if test x$install_bin = xyes; then
    do_install sh $auxdir/mkinstalldirs $bindir
    do_install /usr/bin/install -c -m 755 build/$native_path/sdl-config $bindir/sdl-config
fi
if test x$install_hdrs = xyes; then
    do_install sh $auxdir/mkinstalldirs $includedir/SDL
    for src in $srcdir/include/*.h; do \
        file=`echo $src | sed -e 's|^.*/||'`; \
        do_install /usr/bin/install -c -m 644 $src $includedir/SDL/$file; \
    done
    do_install /usr/bin/install -c -m 644 $srcdir/include/SDL_config_macosx.h $includedir/SDL/SDL_config.h
fi
if test x$install_lib = xyes; then
    do_install sh $auxdir/mkinstalldirs $libdir
    do_install sh build/$native_path/libtool --mode=install /usr/bin/install -c  build/libSDL.la $libdir/libSDL.la
    do_install /usr/bin/install -c -m 644 build/libSDLmain.a $libdir/libSDLmain.a
    do_install ranlib $libdir/libSDLmain.a
fi
if test x$install_data = xyes; then
    do_install sh $auxdir/mkinstalldirs $datadir/aclocal
    do_install /usr/bin/install -c -m 644 $srcdir/sdl.m4 $datadir/aclocal/sdl.m4
fi
if test x$install_man = xyes; then
    do_install sh $auxdir/mkinstalldirs $mandir/man3
    for src in $srcdir/docs/man3/*.3; do \
        file=`echo $src | sed -e 's|^.*/||'`; \
        do_install /usr/bin/install -c -m 644 $src $mandir/man3/$file; \
    done
fi

#
# Clean up
#
do_clean()
{
    echo $*
    $* || exit 6
}
if test x$clean_x86 = xyes; then
    do_clean rm -r build/x86
fi
if test x$clean_ppc = xyes; then
    do_clean rm -r build/ppc
fi