view test/threadwin.c @ 1295:c3e36ac8a94c

Date: Sun, 6 Mar 2005 17:06:20 +0100 From: Per Inge Mathisen Subject: [SDL] Fullscreen refresh on win32 Windows has a terrible default for fullscreen 3D apps of 60mhz refresh rate. This can be fixed by the user by going into his driver's control panel and forcing the refresh rate higher. However, this not a very user friendly way about it, and in any case SDL contains no code that could figure out this that condition has afflicted the user. So the question is, could SDL fix this for the user? It is possible under Windows to request a higher refresh rate. The danger is of course that if the user has an old monitor, and you request a too high refresh rate, the monitor could be damaged. However, I believe there might be a way around that: Check before switching what refresh rate the user's desktop runs in, and if our fullscreen dimensions are equal or less than those of the desktop, use the higher refresh rate of 60 and the desktop rate. Since most users run their desktops in the same or higher resolution something sane, this should fix this problem for most users. Thoughts? An alternative is to add an SDL_GL_GetAttribute(SDL_GL_REFRESH_RATE) option so that programs can bitch at their users at their own convenience. - Per
author Sam Lantinga <slouken@libsdl.org>
date Mon, 30 Jan 2006 06:56:10 +0000
parents be9c9c8f6d53
children 14717b52abc0
line wrap: on
line source


/* Test out the multi-threaded event handling functions */

#include <stdlib.h>
#include <stdio.h>
#include <string.h>

#include "SDL.h"
#include "SDL_thread.h"

/* Are we done yet? */
static int done = 0;

/* Is the cursor visible? */
static int visible = 1;

/* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */
static void quit(int rc)
{
	SDL_Quit();
	exit(rc);
}

SDL_Surface *LoadIconSurface(char *file, Uint8 **maskp)
{
	SDL_Surface *icon;
	Uint8       *pixels;
	Uint8       *mask;
	int          mlen, i;

	*maskp = NULL;

	/* Load the icon surface */
	icon = SDL_LoadBMP(file);
	if ( icon == NULL ) {
		fprintf(stderr, "Couldn't load %s: %s\n", file, SDL_GetError());
		return(NULL);
	}

	/* Check width and height */
	if ( (icon->w%8) != 0 ) {
		fprintf(stderr, "Icon width must be a multiple of 8!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}
	if ( icon->format->palette == NULL ) {
		fprintf(stderr, "Icon must have a palette!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}

	/* Set the colorkey */
	SDL_SetColorKey(icon, SDL_SRCCOLORKEY, *((Uint8 *)icon->pixels));

	/* Create the mask */
	pixels = (Uint8 *)icon->pixels;
	printf("Transparent pixel: (%d,%d,%d)\n",
				icon->format->palette->colors[*pixels].r,
				icon->format->palette->colors[*pixels].g,
				icon->format->palette->colors[*pixels].b);
	mlen = icon->w*icon->h;
	mask = (Uint8 *)malloc(mlen/8);
	if ( mask == NULL ) {
		fprintf(stderr, "Out of memory!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}
	memset(mask, 0, mlen/8);
	for ( i=0; i<mlen; ) {
		if ( pixels[i] != *pixels )
			mask[i/8] |= 0x01;
		++i;
		if ( (i%8) != 0 )
			mask[i/8] <<= 1;
	}
	*maskp = mask;
	return(icon);
}

int FilterEvents(const SDL_Event *event)
{
	static int reallyquit = 0;

	switch (event->type) {

		case SDL_ACTIVEEVENT:
			/* See what happened */
			printf("App %s ",
				event->active.gain ? "gained" : "lost");
			if ( event->active.state & SDL_APPACTIVE )
				printf("active ");
			if ( event->active.state & SDL_APPMOUSEFOCUS )
				printf("mouse ");
			if ( event->active.state & SDL_APPINPUTFOCUS )
				printf("input ");
			printf("focus\n");

			/* See if we are iconified or restored */
			if ( event->active.state & SDL_APPACTIVE ) {
				printf("App has been %s\n",
					event->active.gain ?
						 "restored" : "iconified");
			}
			return(0);

		/* This is important!  Queue it if we want to quit. */
		case SDL_QUIT:
			if ( ! reallyquit ) {
				reallyquit = 1;
				printf("Quit requested\n");
				return(0);
			}
			printf("Quit demanded\n");
			return(1);

		/* Mouse and keyboard events go to threads */
		case SDL_MOUSEMOTION:
		case SDL_MOUSEBUTTONDOWN:
		case SDL_MOUSEBUTTONUP:
		case SDL_KEYDOWN:
		case SDL_KEYUP:
			return(1);

		/* Drop all other events */
		default:
			return(0);
	}
}

int HandleMouse(void *unused)
{
	SDL_Event events[10];
	int i, found;
	Uint32 mask;

	/* Handle mouse events here */
	mask = (SDL_MOUSEMOTIONMASK|SDL_MOUSEBUTTONDOWNMASK|SDL_MOUSEBUTTONUPMASK);
	while ( ! done ) {
		found = SDL_PeepEvents(events, 10, SDL_GETEVENT, mask);
		for ( i=0; i<found; ++i ) {
			switch(events[i].type) {
				/* We want to toggle visibility on buttonpress */
				case SDL_MOUSEBUTTONDOWN:
				case SDL_MOUSEBUTTONUP:
					if ( events[i].button.state == SDL_PRESSED ) {
						visible = !visible;
						SDL_ShowCursor(visible);
					}
					printf("Mouse button %d has been %s\n",
						events[i].button.button,
						(events[i].button.state == SDL_PRESSED) ?
						"pressed" : "released");
					break;
				/* Show relative mouse motion */
				case SDL_MOUSEMOTION:
					printf("Mouse relative motion: {%d,%d}\n",
							events[i].motion.xrel, events[i].motion.yrel);
					break;
			}
		}
		/* Give up some CPU to allow events to arrive */
		SDL_Delay(20);
	}
	return(0);
}

int HandleKeyboard(void *unused)
{
	SDL_Event events[10];
	int i, found;
	Uint32 mask;

	/* Handle mouse events here */
	mask = (SDL_KEYDOWNMASK|SDL_KEYUPMASK);
	while ( ! done ) {
		found = SDL_PeepEvents(events, 10, SDL_GETEVENT, mask);
		for ( i=0; i<found; ++i ) {
			switch(events[i].type) {
			    /* We want to toggle visibility on buttonpress */
			    case SDL_KEYDOWN:
			    case SDL_KEYUP:
			    	printf("Key '%c' has been %s\n",
						events[i].key.keysym.unicode,
					(events[i].key.state == SDL_PRESSED) ?
						"pressed" : "released");

			    	/* Allow hitting <ESC> to quit the app */
			    	if ( events[i].key.keysym.sym == SDLK_ESCAPE ) {
			    		done = 1;
			    	}

					/* skip events now that aren't KEYUPs... */
					if (events[i].key.state == SDL_PRESSED)
						break;

			    	if ( events[i].key.keysym.sym == SDLK_f ) {
						int rc = 0;
						printf("attempting to toggle fullscreen...\n");
						rc = SDL_WM_ToggleFullScreen(SDL_GetVideoSurface());
                        printf("SDL_WM_ToggleFullScreen returned %d.\n", rc);
			    	}

			    	if ( events[i].key.keysym.sym == SDLK_g ) {
						SDL_GrabMode m;
						m = SDL_WM_GrabInput(SDL_GRAB_QUERY) == SDL_GRAB_ON ?
								SDL_GRAB_OFF : SDL_GRAB_ON;
						printf("attempting to toggle input grab to %s...\n",
                                m == SDL_GRAB_ON ? "ON" : "OFF");
                        SDL_WM_GrabInput(m);
						printf("attempt finished.\n");
			    	}

			    	break;
			}
		}
		/* Give up some CPU to allow events to arrive */
		SDL_Delay(20);
	}
	return(0);
}

int main(int argc, char *argv[])
{
	SDL_Surface *screen;
	SDL_Surface *icon;
	Uint8 *icon_mask;
	int i, parsed;
	Uint8 *buffer;
	SDL_Color palette[256];
	Uint32 init_flags;
	Uint8  video_bpp;
	Uint32 video_flags;
	SDL_Thread *mouse_thread;
	SDL_Thread *keybd_thread;

	/* Set the options, based on command line arguments */
	init_flags = SDL_INIT_VIDEO;
	video_bpp = 8;
	video_flags = SDL_SWSURFACE;
	parsed = 1;
	while ( parsed ) {
		/* If the threaded option is enabled, and the SDL library hasn't
		   been compiled with threaded events enabled, then the mouse and
		   keyboard won't respond.
		 */
		if ( (argc >= 2) && (strcmp(argv[1], "-threaded") == 0) ) {
			init_flags |= SDL_INIT_EVENTTHREAD;
			argc -= 1;
			argv += 1;
			printf("Running with threaded events\n");
		} else
		if ( (argc >= 2) && (strcmp(argv[1], "-fullscreen") == 0) ) {
			video_flags |= SDL_FULLSCREEN;
			argc -= 1;
			argv += 1;
		} else
		if ( (argc >= 3) && (strcmp(argv[1], "-bpp") == 0) ) {
			video_bpp = atoi(argv[2]);
			argc -= 2;
			argv += 2;
		} else {
			parsed = 0;
		}
	}

	/* Initialize SDL with the requested flags */
	if ( SDL_Init(init_flags) < 0 ) {
		fprintf(stderr,
			"Couldn't initialize SDL: %s\n", SDL_GetError());
		return(1);
	}

	/* Set the icon -- this must be done before the first mode set */
	icon = LoadIconSurface("icon.bmp", &icon_mask);
	if ( icon != NULL ) {
		SDL_WM_SetIcon(icon, icon_mask);
	}
	if ( icon_mask != NULL )
		free(icon_mask);

	/* Initialize the display */
	screen = SDL_SetVideoMode(640, 480, video_bpp, video_flags);
	if (  screen == NULL ) {
		fprintf(stderr, "Couldn't set 640x480x%d video mode: %s\n",
						video_bpp, SDL_GetError());
		quit(1);
	}
	printf("Running in %s mode\n", screen->flags & SDL_FULLSCREEN ?
						"fullscreen" : "windowed");

	/* Enable printable characters */
	SDL_EnableUNICODE(1);

	/* Set an event filter that discards everything but QUIT */
	SDL_SetEventFilter(FilterEvents);

	/* Create the event handling threads */
	mouse_thread = SDL_CreateThread(HandleMouse, NULL);
	keybd_thread = SDL_CreateThread(HandleKeyboard, NULL);

	/* Set the surface pixels and refresh! */
	for ( i=0; i<256; ++i ) {
		palette[i].r = 255-i;
		palette[i].g = 255-i;
		palette[i].b = 255-i;
	}
	SDL_SetColors(screen, palette, 0, 256);
	if ( SDL_LockSurface(screen) < 0 ) {
		fprintf(stderr, "Couldn't lock display surface: %s\n",
							SDL_GetError());
		quit(2);
	}
	buffer = (Uint8 *)screen->pixels;
	for ( i=0; i<screen->h; ++i ) {
		memset(buffer,(i*255)/screen->h,
				screen->w*screen->format->BytesPerPixel);
		buffer += screen->pitch;
	}
	SDL_UnlockSurface(screen);
	SDL_UpdateRect(screen, 0, 0, 0, 0);

	/* Loop, waiting for QUIT */
	while ( ! done ) {
		if ( ! (init_flags & SDL_INIT_EVENTTHREAD) ) {
			SDL_PumpEvents(); /* Needed when event thread is off */
		}
		if ( SDL_PeepEvents(NULL, 0, SDL_PEEKEVENT, SDL_QUITMASK) ) {
			done = 1;
		}
		/* Give up some CPU so the events can accumulate */
		SDL_Delay(20);
	}
	SDL_WaitThread(mouse_thread, NULL);
	SDL_WaitThread(keybd_thread, NULL);
	SDL_Quit();
	return(0);
}