view src/audio/windib/SDL_dibaudio.c @ 1295:c3e36ac8a94c

Date: Sun, 6 Mar 2005 17:06:20 +0100 From: Per Inge Mathisen Subject: [SDL] Fullscreen refresh on win32 Windows has a terrible default for fullscreen 3D apps of 60mhz refresh rate. This can be fixed by the user by going into his driver's control panel and forcing the refresh rate higher. However, this not a very user friendly way about it, and in any case SDL contains no code that could figure out this that condition has afflicted the user. So the question is, could SDL fix this for the user? It is possible under Windows to request a higher refresh rate. The danger is of course that if the user has an old monitor, and you request a too high refresh rate, the monitor could be damaged. However, I believe there might be a way around that: Check before switching what refresh rate the user's desktop runs in, and if our fullscreen dimensions are equal or less than those of the desktop, use the higher refresh rate of 60 and the desktop rate. Since most users run their desktops in the same or higher resolution something sane, this should fix this problem for most users. Thoughts? An alternative is to add an SDL_GL_GetAttribute(SDL_GL_REFRESH_RATE) option so that programs can bitch at their users at their own convenience. - Per
author Sam Lantinga <slouken@libsdl.org>
date Mon, 30 Jan 2006 06:56:10 +0000
parents b8d311d90021
children c9b51268668f
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2004 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.

    You should have received a copy of the GNU Library General Public
    License along with this library; if not, write to the Free
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Sam Lantinga
    slouken@libsdl.org
*/

#ifdef SAVE_RCSID
static char rcsid =
 "@(#) $Id$";
#endif

/* Allow access to a raw mixing buffer */

#include <stdio.h>
#include <stdlib.h>
#include <windows.h>
#include <mmsystem.h>

#include "SDL_audio.h"
#include "SDL_mutex.h"
#include "SDL_timer.h"
#include "SDL_audio_c.h"
#include "SDL_dibaudio.h"
#if defined(_WIN32_WCE) && (_WIN32_WCE < 300)
#include "win_ce_semaphore.h"
#endif


/* Audio driver functions */
static int DIB_OpenAudio(_THIS, SDL_AudioSpec *spec);
static void DIB_ThreadInit(_THIS);
static void DIB_WaitAudio(_THIS);
static Uint8 *DIB_GetAudioBuf(_THIS);
static void DIB_PlayAudio(_THIS);
static void DIB_WaitDone(_THIS);
static void DIB_CloseAudio(_THIS);

/* Audio driver bootstrap functions */

static int Audio_Available(void)
{
	return(1);
}

static void Audio_DeleteDevice(SDL_AudioDevice *device)
{
	free(device->hidden);
	free(device);
}

static SDL_AudioDevice *Audio_CreateDevice(int devindex)
{
	SDL_AudioDevice *this;

	/* Initialize all variables that we clean on shutdown */
	this = (SDL_AudioDevice *)malloc(sizeof(SDL_AudioDevice));
	if ( this ) {
		memset(this, 0, (sizeof *this));
		this->hidden = (struct SDL_PrivateAudioData *)
				malloc((sizeof *this->hidden));
	}
	if ( (this == NULL) || (this->hidden == NULL) ) {
		SDL_OutOfMemory();
		if ( this ) {
			free(this);
		}
		return(0);
	}
	memset(this->hidden, 0, (sizeof *this->hidden));

	/* Set the function pointers */
	this->OpenAudio = DIB_OpenAudio;
	this->ThreadInit = DIB_ThreadInit;
	this->WaitAudio = DIB_WaitAudio;
	this->PlayAudio = DIB_PlayAudio;
	this->GetAudioBuf = DIB_GetAudioBuf;
	this->WaitDone = DIB_WaitDone;
	this->CloseAudio = DIB_CloseAudio;

	this->free = Audio_DeleteDevice;

	return this;
}

AudioBootStrap WAVEOUT_bootstrap = {
	"waveout", "Win95/98/NT/2000 WaveOut",
	Audio_Available, Audio_CreateDevice
};


/* The Win32 callback for filling the WAVE device */
static void CALLBACK FillSound(HWAVEOUT hwo, UINT uMsg, DWORD dwInstance,
						DWORD dwParam1, DWORD dwParam2)
{
	SDL_AudioDevice *this = (SDL_AudioDevice *)dwInstance;

	/* Only service "buffer done playing" messages */
	if ( uMsg != WOM_DONE )
		return;

	/* Signal that we are done playing a buffer */
#if defined(_WIN32_WCE) && (_WIN32_WCE < 300)
	ReleaseSemaphoreCE(audio_sem, 1, NULL);
#else
	ReleaseSemaphore(audio_sem, 1, NULL);
#endif
}

static void SetMMerror(char *function, MMRESULT code)
{
	int len;
	char errbuf[MAXERRORLENGTH];
#ifdef _WIN32_WCE
	wchar_t werrbuf[MAXERRORLENGTH];
#endif

	sprintf(errbuf, "%s: ", function);
	len = strlen(errbuf);

#ifdef _WIN32_WCE
	/* UNICODE version */
	waveOutGetErrorText(code, werrbuf, MAXERRORLENGTH-len);
	WideCharToMultiByte(CP_ACP,0,werrbuf,-1,errbuf+len,MAXERRORLENGTH-len,NULL,NULL);
#else
	waveOutGetErrorText(code, errbuf+len, MAXERRORLENGTH-len);
#endif

	SDL_SetError("%s",errbuf);
}

/* Set high priority for the audio thread */
static void DIB_ThreadInit(_THIS)
{
	SetThreadPriority(GetCurrentThread(), THREAD_PRIORITY_HIGHEST);
}

void DIB_WaitAudio(_THIS)
{
	/* Wait for an audio chunk to finish */
#if defined(_WIN32_WCE) && (_WIN32_WCE < 300)
	WaitForSemaphoreCE(audio_sem, INFINITE);
#else
	WaitForSingleObject(audio_sem, INFINITE);
#endif
}

Uint8 *DIB_GetAudioBuf(_THIS)
{
        Uint8 *retval;

	retval = (Uint8 *)(wavebuf[next_buffer].lpData);
	return retval;
}

void DIB_PlayAudio(_THIS)
{
	/* Queue it up */
	waveOutWrite(sound, &wavebuf[next_buffer], sizeof(wavebuf[0]));
	next_buffer = (next_buffer+1)%NUM_BUFFERS;
}

void DIB_WaitDone(_THIS)
{
	int i, left;

	do {
		left = NUM_BUFFERS;
		for ( i=0; i<NUM_BUFFERS; ++i ) {
			if ( wavebuf[i].dwFlags & WHDR_DONE ) {
				--left;
			}
		}
		if ( left > 0 ) {
			SDL_Delay(100);
		}
	} while ( left > 0 );
}

void DIB_CloseAudio(_THIS)
{
	int i;

	/* Close up audio */
	if ( audio_sem ) {
#if defined(_WIN32_WCE) && (_WIN32_WCE < 300)
		CloseSynchHandle(audio_sem);
#else
		CloseHandle(audio_sem);
#endif
	}
	if ( sound ) {
		waveOutClose(sound);
	}

	/* Clean up mixing buffers */
	for ( i=0; i<NUM_BUFFERS; ++i ) {
		if ( wavebuf[i].dwUser != 0xFFFF ) {
			waveOutUnprepareHeader(sound, &wavebuf[i],
						sizeof(wavebuf[i]));
			wavebuf[i].dwUser = 0xFFFF;
		}
	}
	/* Free raw mixing buffer */
	if ( mixbuf != NULL ) {
		free(mixbuf);
		mixbuf = NULL;
	}
}

int DIB_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
	MMRESULT result;
	int i;
	WAVEFORMATEX waveformat;

	/* Initialize the wavebuf structures for closing */
	sound = NULL;
	audio_sem = NULL;
	for ( i = 0; i < NUM_BUFFERS; ++i )
		wavebuf[i].dwUser = 0xFFFF;
	mixbuf = NULL;

	/* Set basic WAVE format parameters */
	memset(&waveformat, 0, sizeof(waveformat));
	waveformat.wFormatTag = WAVE_FORMAT_PCM;

	/* Determine the audio parameters from the AudioSpec */
	switch ( spec->format & 0xFF ) {
		case 8:
			/* Unsigned 8 bit audio data */
			spec->format = AUDIO_U8;
			waveformat.wBitsPerSample = 8;
			break;
		case 16:
			/* Signed 16 bit audio data */
			spec->format = AUDIO_S16;
			waveformat.wBitsPerSample = 16;
			break;
		default:
			SDL_SetError("Unsupported audio format");
			return(-1);
	}
	waveformat.nChannels = spec->channels;
	waveformat.nSamplesPerSec = spec->freq;
	waveformat.nBlockAlign =
		waveformat.nChannels * (waveformat.wBitsPerSample/8);
	waveformat.nAvgBytesPerSec = 
		waveformat.nSamplesPerSec * waveformat.nBlockAlign;

	/* Check the buffer size -- minimum of 1/4 second (word aligned) */
	if ( spec->samples < (spec->freq/4) )
		spec->samples = ((spec->freq/4)+3)&~3;

	/* Update the fragment size as size in bytes */
	SDL_CalculateAudioSpec(spec);

	/* Open the audio device */
	result = waveOutOpen(&sound, WAVE_MAPPER, &waveformat,
			(DWORD)FillSound, (DWORD)this, CALLBACK_FUNCTION);
	if ( result != MMSYSERR_NOERROR ) {
		SetMMerror("waveOutOpen()", result);
		return(-1);
	}

#ifdef SOUND_DEBUG
	/* Check the sound device we retrieved */
	{
		WAVEOUTCAPS caps;

		result = waveOutGetDevCaps((UINT)sound, &caps, sizeof(caps));
		if ( result != MMSYSERR_NOERROR ) {
			SetMMerror("waveOutGetDevCaps()", result);
			return(-1);
		}
		printf("Audio device: %s\n", caps.szPname);
	}
#endif

	/* Create the audio buffer semaphore */
#if defined(_WIN32_WCE) && (_WIN32_WCE < 300)
	audio_sem = CreateSemaphoreCE(NULL, NUM_BUFFERS-1, NUM_BUFFERS, NULL);
#else
	audio_sem = CreateSemaphore(NULL, NUM_BUFFERS-1, NUM_BUFFERS, NULL);
#endif
	if ( audio_sem == NULL ) {
		SDL_SetError("Couldn't create semaphore");
		return(-1);
	}

	/* Create the sound buffers */
	mixbuf = (Uint8 *)malloc(NUM_BUFFERS*spec->size);
	if ( mixbuf == NULL ) {
		SDL_SetError("Out of memory");
		return(-1);
	}
	for ( i = 0; i < NUM_BUFFERS; ++i ) {
		memset(&wavebuf[i], 0, sizeof(wavebuf[i]));
		wavebuf[i].lpData = (LPSTR) &mixbuf[i*spec->size];
		wavebuf[i].dwBufferLength = spec->size;
		wavebuf[i].dwFlags = WHDR_DONE;
		result = waveOutPrepareHeader(sound, &wavebuf[i],
							sizeof(wavebuf[i]));
		if ( result != MMSYSERR_NOERROR ) {
			SetMMerror("waveOutPrepareHeader()", result);
			return(-1);
		}
	}

	/* Ready to go! */
	next_buffer = 0;
	return(0);
}