Mercurial > sdl-ios-xcode
view src/power/beos/SDL_syspower.c @ 3335:b8d313de8a65
Adam Strzelecki to SDL
Since current DirectFB implementation is incomplete for YUV surfaces (actually causes segmentation faults when trying Lock and use YUV planar textures) I decided to fix it a bit.
Here's a patch that should make DirectFB properly support YUV both packed and planar (3 planes).
(1) Removed SDL_BYTESPERPIXEL at all in favor of DFB_BYTES_PER_PIXEL(SDLToDFBPixelFormat(fmt)) which does return always proper BPP for YUVs too, coz SDL_BYTESPERPIXEL returns incorrect values for FOURCCs
(2) Fixed data->pixels allocation for planar YUVs in CreateTexture, it should allocate 150% more space
(3) Copy other planes for planar YUVs in UpdateTexture
(4) Moved checking if format is supported at all with DirectFB on CreateTexture at the beginning of the code
Waiting for comments,
--
Adam Strzelecki | nanoant.com
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Sun, 04 Oct 2009 04:03:37 +0000 |
parents | 51750b7a966f |
children | f7b03b6838cb |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2009 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ #include "SDL_config.h" #ifndef SDL_POWER_DISABLED #ifdef SDL_POWER_BEOS #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <ctype.h> #include <drivers/Drivers.h> /* These values are from apm.h ... */ #define APM_DEVICE_PATH "/dev/misc/apm" #define APM_FUNC_OFFSET 0x5300 #define APM_FUNC_GET_POWER_STATUS 10 #define APM_DEVICE_ALL 1 #define APM_BIOS_CALL (B_DEVICE_OP_CODES_END + 3) #include "SDL_power.h" SDL_bool SDL_GetPowerInfo_BeOS(SDL_PowerState * state, int *seconds, int *percent) { const int fd = open("/dev/misc/apm", O_RDONLY); SDL_bool need_details = SDL_FALSE; uint16 regs[6]; uint8 ac_status; uint8 battery_status; uint8 battery_flags; uint8 battery_life; uint32 battery_time; if (fd == -1) { return SDL_FALSE; /* maybe some other method will work? */ } memset(regs, '\0', sizeof(regs)); regs[0] = APM_FUNC_OFFSET + APM_FUNC_GET_POWER_STATUS; regs[1] = APM_DEVICE_ALL; rc = ioctl(fd, APM_BIOS_CALL, regs); close(fd); if (rc < 0) { return SDL_FALSE; } ac_status = regs[1] >> 8; battery_status = regs[1] & 0xFF; battery_flags = regs[2] >> 8; battery_life = regs[2] & 0xFF; battery_time = (uint32) regs[3]; /* in theory, _something_ should be set in battery_flags, right? */ if (battery_flags == 0x00) { /* older APM BIOS? Less fields. */ battery_time = 0xFFFF; if (battery_status == 0xFF) { battery_flags = 0xFF; } else { battery_flags = (1 << status.battery_status); } } if ((battery_time != 0xFFFF) && (battery_time & (1 << 15))) { /* time is in minutes, not seconds */ battery_time = (battery_time & 0x7FFF) * 60; } if (battery_flags == 0xFF) { /* unknown state */ *state = SDL_POWERSTATE_UNKNOWN; } else if (battery_flags & (1 << 7)) { /* no battery */ *state = SDL_POWERSTATE_NO_BATTERY; } else if (battery_flags & (1 << 3)) { /* charging */ *state = SDL_POWERSTATE_CHARGING; need_details = SDL_TRUE; } else if (ac_status == 1) { *state = SDL_POWERSTATE_CHARGED; /* on AC, not charging. */ need_details = SDL_TRUE; } else { *state = SDL_POWERSTATE_ON_BATTERY; /* not on AC. */ need_details = SDL_TRUE; } *percent = -1; *seconds = -1; if (need_details) { const int pct = (int) battery_life; const int secs = (int) battery_time; if (pct != 255) { /* 255 == unknown */ *percent = (pct > 100) ? 100 : pct; /* clamp between 0%, 100% */ } if (secs != 0xFFFF) { /* 0xFFFF == unknown */ *seconds = secs; } } return SDL_TRUE; /* the definitive answer if APM driver replied. */ } #endif /* SDL_POWER_BEOS */ #endif /* SDL_POWER_DISABLED */ /* vi: set ts=4 sw=4 expandtab: */