Fixed bug #61 Date: Mon, 24 Feb 2003 13:35:11 +0800 From: "Leonidas" Subject: [SDL] Re: Trigger mouse wheel event -- not in X-environment I have looked into the codes for the IMPS/2 mouse wheel mode of fbcon driver. But I found something weird. Here's the original codes to set a mouse device into IMPS/2 mode in libSDL. In the file src/video/fbcon/SDL_fbevents.c In function static int set_imps2_mode(int fd) ... Uint8 set_imps2[] = {0xf3, 200, 0xf3, 100, 0xf3, 80}; Uint8 reset = 0xff; fd_set fdset; struct timeval tv; int retval = 0; // Set mouse device fd into IMPS/2 mode if ( write(fd, &set_imps2, sizeof(set_imps2)) == sizeof(set_imps2) ) { // ??? then RESET it..??? if (write(fd, &reset, sizeof (reset)) == sizeof (reset) ) { retval = 1; } } ........... Since it sets IMPS/2 mode then reset it, so you will never get a mouse into IMPS/2 mode to use its wheel. What I did to make the wheel usable is remove the RESET codes. .... if ( write(fd, &set_imps2, sizeof(set_imps2)) == sizeof(set_imps2) ) { /* if (write(fd, &reset, sizeof (reset)) == sizeof (reset) ) { } */ retval = 1; } .... And in FB_OpenMouse(_THIS) Make the device /dev/psaux to be setted into imps2 mode such that it can be detected its a imps/2 mouse or not. (my mouse device is on ps2, but the codes only set /dev/input/mice device originally) Then I have done, I can use the mouse wheel when SDL uses frame buff driver. I dont exactly know I did right or wrong, I just change it for my usuage. Correct me please, if I did something wrong. Best regards, Li Tsung Lin IAP Product Dept. Engineer EeRise Corp. (Image Processing System, Computer Vision System) Hsin Tien, Taipei Hsien, Taiwan, R.O.C.

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/* 3Dfx register definitions */

#include "3dfx_regs.h"

/* 3Dfx control macros */

#define tdfx_in8(reg)		*(volatile Uint8  *)(mapped_io + (reg))
#define tdfx_in32(reg)		*(volatile Uint32 *)(mapped_io + (reg))

#define tdfx_out8(reg,v)	*(volatile Uint8  *)(mapped_io + (reg)) = v;
#define tdfx_out32(reg,v)	*(volatile Uint32 *)(mapped_io + (reg)) = v;


/* Wait for fifo space */
#define tdfx_wait(space)						\
{									\
	while ( (tdfx_in8(TDFX_STATUS) & 0x1F) < space )		\
		;							\
}


/* Wait for idle accelerator */
#define tdfx_waitidle()							\
{									\
	int i = 0;							\
									\
	tdfx_wait(1);							\
	tdfx_out32(COMMAND_3D, COMMAND_3D_NOP);				\
	do {								\
		i = (tdfx_in32(TDFX_STATUS) & STATUS_BUSY) ? 0 : i + 1;	\
	} while ( i != 3 );						\
}