view src/video/SDL_blit_1.c @ 4167:a6f635e5eaa6 SDL-1.2

Fixed bug #611 From Tim Angus 2008-08-12 11:18:06 I'm one of the maintainers of ioquake3.org, an updated version of the Quake 3 engine. Relatively recently, we moved ioq3 to use SDL as a replacement for 95% of the platform specific code that was there. On the whole it's doing a great job but unfortunately since the move we've been getting complaints about the quality of the mouse input on the Windows platform to the point where for many the game is unplayable. Put in other terms, the current stable SDL 1.2 is basically not fit for purpose if you need high quality mouse input as you do in a first person shooter. Over the weekend I decided to pull my finger out and actually figure out what's going on. There are basically two major problems. Firstly, when using the "windib" driver, mouse input is gathered via the WM_MOUSEMOVE message. Googling for this indicates that often this is known to result in "spurious" and/or "missing" mouse movement events; this is the primary cause of the poor mouse input. The second problem is that the "directx" driver does not work at all in combination with OpenGL meaning that you can't use DirectInput if your application also uses OpenGL. In other words you're locked into using the "windib" driver and its poor mouse input. In order to address these problems I've done the following: * Remove WM_MOUSEMOVE based motion event generation and replace with calls to GetCursorPos which seems much more reliable. In order to achieve this I've moved mouse motion out into a separate function that is called once per DIB_PumpEvents. * Remove the restriction on the "directx" driver being inoperable in combination with OpenGL. There is a bug for this issues that I've hijacked to a certain extent (http://bugzilla.libsdl.org/show_bug.cgi?id=265). I'm the first to admit I don't really understand why this restriction is there in the first place. The commit message for the bug fix that introduced this restriction (r581) isn't very elaborate and I couldn't see any other bug tracking the issue. If anyone has more information on the bug that was avoided by r581 it would be helpful as I/someone could then look into addressing the problem without disabling the "directx" driver. * I've also removed the restriction on not being allowed to use DirectInput in windowed mode. I couldn't see any reason for this, at least not from our perspective. I have my suspicions that it'll be something like matching up the cursor with the mouse coordinates... * I bumped up the DirectInput API used to version 7 in order to get access to mouse buttons 4-7. I've had to inject a little bit of the DX7 headers into SDL there as the MinGW ones aren't up to date in this respect.
author Sam Lantinga <slouken@libsdl.org>
date Thu, 02 Apr 2009 04:43:36 +0000
parents a1b03ba2fcd0
children
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2009 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#include "SDL_video.h"
#include "SDL_blit.h"
#include "SDL_sysvideo.h"
#include "SDL_endian.h"

/* Functions to blit from 8-bit surfaces to other surfaces */

static void Blit1to1(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src, *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			{
			  *dst = map[*src];
			}
			dst++;
			src++;
		, width);
#else
		for ( c=width; c; --c ) {
		        *dst = map[*src];
			dst++;
			src++;
		}
#endif
		src += srcskip;
		dst += dstskip;
	}
}
/* This is now endian dependent */
#if ( SDL_BYTEORDER == SDL_LIL_ENDIAN )
#define HI	1
#define LO	0
#else /* ( SDL_BYTEORDER == SDL_BIG_ENDIAN ) */
#define HI	0
#define LO	1
#endif
static void Blit1to2(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src, *dst;
	Uint16 *map;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = (Uint16 *)info->table;

#ifdef USE_DUFFS_LOOP
	while ( height-- ) {
		DUFFS_LOOP(
		{
			*(Uint16 *)dst = map[*src++];
			dst += 2;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
#else
	/* Memory align at 4-byte boundary, if necessary */
	if ( (long)dst & 0x03 ) {
		/* Don't do anything if width is 0 */
		if ( width == 0 ) {
			return;
		}
		--width;

		while ( height-- ) {
			/* Perform copy alignment */
			*(Uint16 *)dst = map[*src++];
			dst += 2;

			/* Copy in 4 pixel chunks */
			for ( c=width/4; c; --c ) {
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
			}
			/* Get any leftovers */
			switch (width & 3) {
				case 3:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
				case 2:
					*(Uint32 *)dst =
					  (map[src[HI]]<<16)|(map[src[LO]]);
					src += 2;
					dst += 4;
					break;
				case 1:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
					break;
			}
			src += srcskip;
			dst += dstskip;
		}
	} else { 
		while ( height-- ) {
			/* Copy in 4 pixel chunks */
			for ( c=width/4; c; --c ) {
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
			}
			/* Get any leftovers */
			switch (width & 3) {
				case 3:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
				case 2:
					*(Uint32 *)dst =
					  (map[src[HI]]<<16)|(map[src[LO]]);
					src += 2;
					dst += 4;
					break;
				case 1:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
					break;
			}
			src += srcskip;
			dst += dstskip;
		}
	}
#endif /* USE_DUFFS_LOOP */
}
static void Blit1to3(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int o;
	int width, height;
	Uint8 *src, *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			{
				o = *src * 4;
				dst[0] = map[o++];
				dst[1] = map[o++];
				dst[2] = map[o++];
			}
			src++;
			dst += 3;
		, width);
#else
		for ( c=width; c; --c ) {
			o = *src * 4;
			dst[0] = map[o++];
			dst[1] = map[o++];
			dst[2] = map[o++];
			src++;
			dst += 3;
		}
#endif /* USE_DUFFS_LOOP */
		src += srcskip;
		dst += dstskip;
	}
}
static void Blit1to4(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src;
	Uint32 *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = (Uint32 *)info->d_pixels;
	dstskip = info->d_skip/4;
	map = (Uint32 *)info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			*dst++ = map[*src++];
		, width);
#else
		for ( c=width/4; c; --c ) {
			*dst++ = map[*src++];
			*dst++ = map[*src++];
			*dst++ = map[*src++];
			*dst++ = map[*src++];
		}
		switch ( width & 3 ) {
			case 3:
				*dst++ = map[*src++];
			case 2:
				*dst++ = map[*src++];
			case 1:
				*dst++ = map[*src++];
		}
#endif /* USE_DUFFS_LOOP */
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1to1Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	Uint8 *palmap = info->table;
	Uint32 ckey = info->src->colorkey;
        
	if ( palmap ) {
		while ( height-- ) {
			DUFFS_LOOP(
			{
				if ( *src != ckey ) {
				  *dst = palmap[*src];
				}
				dst++;
				src++;
			},
			width);
			src += srcskip;
			dst += dstskip;
		}
	} else {
		while ( height-- ) {
			DUFFS_LOOP(
			{
				if ( *src != ckey ) {
				  *dst = *src;
				}
				dst++;
				src++;
			},
			width);
			src += srcskip;
			dst += dstskip;
		}
	}
}

static void Blit1to2Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint16 *dstp = (Uint16 *)info->d_pixels;
	int dstskip = info->d_skip;
	Uint16 *palmap = (Uint16 *)info->table;
	Uint32 ckey = info->src->colorkey;

	/* Set up some basic variables */
	dstskip /= 2;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				*dstp=palmap[*src];
			}
			src++;
			dstp++;
		},
		width);
		src += srcskip;
		dstp += dstskip;
	}
}

static void Blit1to3Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	Uint8 *palmap = info->table;
	Uint32 ckey = info->src->colorkey;
	int o;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				o = *src * 4;
				dst[0] = palmap[o++];
				dst[1] = palmap[o++];
				dst[2] = palmap[o++];
			}
			src++;
			dst += 3;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1to4Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint32 *dstp = (Uint32 *)info->d_pixels;
	int dstskip = info->d_skip;
	Uint32 *palmap = (Uint32 *)info->table;
	Uint32 ckey = info->src->colorkey;

	/* Set up some basic variables */
	dstskip /= 4;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				*dstp = palmap[*src];
			}
			src++;
			dstp++;
		},
		width);
		src += srcskip;
		dstp += dstskip;
	}
}

static void Blit1toNAlpha(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	SDL_PixelFormat *dstfmt = info->dst;
	const SDL_Color *srcpal	= info->src->palette->colors;
	int dstbpp;
	const int A = info->src->alpha;

	/* Set up some basic variables */
	dstbpp = dstfmt->BytesPerPixel;

	while ( height-- ) {
	        int sR, sG, sB;
		int dR, dG, dB;
	    	DUFFS_LOOP4(
			{
			        Uint32 pixel;
				sR = srcpal[*src].r;
				sG = srcpal[*src].g;
				sB = srcpal[*src].b;
				DISEMBLE_RGB(dst, dstbpp, dstfmt,
					     pixel, dR, dG, dB);
				ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB);
			  	ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB);
				src++;
				dst += dstbpp;
			},
			width);
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1toNAlphaKey(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	SDL_PixelFormat *srcfmt = info->src;
	SDL_PixelFormat *dstfmt = info->dst;
	const SDL_Color *srcpal	= info->src->palette->colors;
	Uint32 ckey = srcfmt->colorkey;
	int dstbpp;
	const int A = srcfmt->alpha;

	/* Set up some basic variables */
	dstbpp = dstfmt->BytesPerPixel;

	while ( height-- ) {
	        int sR, sG, sB;
		int dR, dG, dB;
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
			        Uint32 pixel;
				sR = srcpal[*src].r;
				sG = srcpal[*src].g;
				sB = srcpal[*src].b;
				DISEMBLE_RGB(dst, dstbpp, dstfmt,
							pixel, dR, dG, dB);
				ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB);
			  	ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB);
			}
			src++;
			dst += dstbpp;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
}

static SDL_loblit one_blit[] = {
	NULL, Blit1to1, Blit1to2, Blit1to3, Blit1to4
};

static SDL_loblit one_blitkey[] = {
        NULL, Blit1to1Key, Blit1to2Key, Blit1to3Key, Blit1to4Key
};

SDL_loblit SDL_CalculateBlit1(SDL_Surface *surface, int blit_index)
{
	int which;
	SDL_PixelFormat *dstfmt;

	dstfmt = surface->map->dst->format;
	if ( dstfmt->BitsPerPixel < 8 ) {
		which = 0;
	} else {
		which = dstfmt->BytesPerPixel;
	}
	switch(blit_index) {
	case 0:			/* copy */
	    return one_blit[which];

	case 1:			/* colorkey */
	    return one_blitkey[which];

	case 2:			/* alpha */
	    /* Supporting 8bpp->8bpp alpha is doable but requires lots of
	       tables which consume space and takes time to precompute,
	       so is better left to the user */
	    return which >= 2 ? Blit1toNAlpha : NULL;

	case 3:			/* alpha + colorkey */
	    return which >= 2 ? Blit1toNAlphaKey : NULL;

	}
	return NULL;
}