Mercurial > sdl-ios-xcode

view docs/html/sdlsetalpha.html @ 4167:a6f635e5eaa6 SDL-1.2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Fixed bug #611 From Tim Angus 2008-08-12 11:18:06 I'm one of the maintainers of ioquake3.org, an updated version of the Quake 3 engine. Relatively recently, we moved ioq3 to use SDL as a replacement for 95% of the platform specific code that was there. On the whole it's doing a great job but unfortunately since the move we've been getting complaints about the quality of the mouse input on the Windows platform to the point where for many the game is unplayable. Put in other terms, the current stable SDL 1.2 is basically not fit for purpose if you need high quality mouse input as you do in a first person shooter. Over the weekend I decided to pull my finger out and actually figure out what's going on. There are basically two major problems. Firstly, when using the "windib" driver, mouse input is gathered via the WM_MOUSEMOVE message. Googling for this indicates that often this is known to result in "spurious" and/or "missing" mouse movement events; this is the primary cause of the poor mouse input. The second problem is that the "directx" driver does not work at all in combination with OpenGL meaning that you can't use DirectInput if your application also uses OpenGL. In other words you're locked into using the "windib" driver and its poor mouse input. In order to address these problems I've done the following: * Remove WM_MOUSEMOVE based motion event generation and replace with calls to GetCursorPos which seems much more reliable. In order to achieve this I've moved mouse motion out into a separate function that is called once per DIB_PumpEvents. * Remove the restriction on the "directx" driver being inoperable in combination with OpenGL. There is a bug for this issues that I've hijacked to a certain extent (http://bugzilla.libsdl.org/show_bug.cgi?id=265). I'm the first to admit I don't really understand why this restriction is there in the first place. The commit message for the bug fix that introduced this restriction (r581) isn't very elaborate and I couldn't see any other bug tracking the issue. If anyone has more information on the bug that was avoided by r581 it would be helpful as I/someone could then look into addressing the problem without disabling the "directx" driver. * I've also removed the restriction on not being allowed to use DirectInput in windowed mode. I couldn't see any reason for this, at least not from our perspective. I have my suspicions that it'll be something like matching up the cursor with the mouse coordinates... * I bumped up the DirectInput API used to version 7 in order to get access to mouse buttons 4-7. I've had to inject a little bit of the DX7 headers into SDL there as the MinGW ones aren't up to date in this respect.
author Sam Lantinga <slouken@libsdl.org>
date Thu, 02 Apr 2009 04:43:36 +0000
parents 355632dca928
children
line wrap: on
line source

<HTML
><HEAD
><TITLE
>SDL_SetAlpha</TITLE
><META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="SDL Library Documentation"
HREF="index.html"><LINK
REL="UP"
TITLE="Video"
HREF="video.html"><LINK
REL="PREVIOUS"
TITLE="SDL_SetColorKey"
HREF="sdlsetcolorkey.html"><LINK
REL="NEXT"
TITLE="SDL_SetClipRect"
HREF="sdlsetcliprect.html"></HEAD
><BODY
CLASS="REFENTRY"
BGCOLOR="#FFF8DC"
TEXT="#000000"
LINK="#0000ee"
VLINK="#551a8b"
ALINK="#ff0000"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>SDL Library Documentation</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="sdlsetcolorkey.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
></TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="sdlsetcliprect.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><H1
><A
NAME="SDLSETALPHA"
></A
>SDL_SetAlpha</H1
><DIV
CLASS="REFNAMEDIV"
><A
NAME="AEN2096"
></A
><H2
>Name</H2
>SDL_SetAlpha&nbsp;--&nbsp;Adjust the alpha properties of a surface</DIV
><DIV
CLASS="REFSYNOPSISDIV"
><A
NAME="AEN2099"
></A
><H2
>Synopsis</H2
><DIV
CLASS="FUNCSYNOPSIS"
><A
NAME="AEN2100"
></A
><P
></P
><PRE
CLASS="FUNCSYNOPSISINFO"
>#include "SDL.h"</PRE
><P
><CODE
><CODE
CLASS="FUNCDEF"
>int <B
CLASS="FSFUNC"
>SDL_SetAlpha</B
></CODE
>(SDL_Surface *surface, Uint32 flag, Uint8 alpha);</CODE
></P
><P
></P
></DIV
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN2106"
></A
><H2
>Description</H2
><DIV
CLASS="NOTE"
><BLOCKQUOTE
CLASS="NOTE"
><P
><B
>Note: </B
>This function and the semantics of SDL alpha blending have changed since version 1.1.4. Up until version 1.1.5, an alpha value of 0 was considered opaque and a value of 255 was considered transparent. This has now been inverted: 0 (<TT
CLASS="LITERAL"
>SDL_ALPHA_TRANSPARENT</TT
>) is now considered transparent and 255 (<TT
CLASS="LITERAL"
>SDL_ALPHA_OPAQUE</TT
>) is now considered opaque.</P
></BLOCKQUOTE
></DIV
><P
><TT
CLASS="FUNCTION"
>SDL_SetAlpha</TT
> is used for setting the per-surface alpha
value and/or enabling and disabling alpha blending.</P
><P
>The<TT
CLASS="PARAMETER"
><I
>surface</I
></TT
> parameter specifies which surface whose alpha
attributes you wish to adjust. <TT
CLASS="PARAMETER"
><I
>flags</I
></TT
> is used to specify
whether alpha blending should be used (<TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
>) and
whether the surface should use RLE acceleration for blitting
(<TT
CLASS="LITERAL"
>SDL_RLEACCEL</TT
>). <TT
CLASS="PARAMETER"
><I
>flags</I
></TT
> can be an OR'd
combination of these two options, one of these options or 0. If
<TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
> is not passed as a flag then all alpha
information is ignored when blitting the surface. The
<TT
CLASS="PARAMETER"
><I
>alpha</I
></TT
> parameter is the per-surface alpha value; a
surface need not have an alpha channel to use per-surface alpha and blitting
can still be accelerated with <TT
CLASS="LITERAL"
>SDL_RLEACCEL</TT
>.</P
><DIV
CLASS="NOTE"
><BLOCKQUOTE
CLASS="NOTE"
><P
><B
>Note: </B
>The per-surface alpha value of 128 is considered a special case and
is optimised, so it's much faster than other per-surface values.</P
></BLOCKQUOTE
></DIV
><P
>Alpha effects surface blitting in the following ways:</P
><DIV
CLASS="INFORMALTABLE"
><A
NAME="AEN2126"
></A
><P
></P
><TABLE
BORDER="0"
CLASS="CALSTABLE"
><TBODY
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGBA-&#62;RGB with <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The source is alpha-blended with the destination, using the alpha channel. <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> and the per-surface alpha are ignored.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGBA-&#62;RGB without <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The RGB data is copied from the source. The source alpha channel and the per-surface alpha value are ignored.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGB-&#62;RGBA with <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The source is alpha-blended with the destination using the per-surface alpha
value. If <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is set, only the pixels not
matching the colorkey value are copied. The alpha channel of the copied pixels
is set to opaque.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGB-&#62;RGBA without <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The RGB data is copied from the source and the alpha value of the copied pixels
is set to opaque. If <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is set, only the pixels
not matching the colorkey value are copied. </P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGBA-&#62;RGBA with <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The source is alpha-blended with the destination using the source alpha
channel. The alpha channel in the destination surface is left untouched.
<TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is ignored.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGBA-&#62;RGBA without <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The RGBA data is copied to the destination surface. If <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is set, only the pixels not matching the colorkey value are copied.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGB-&#62;RGB with <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The source is alpha-blended with the destination using the per-surface alpha value. If <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is set, only the pixels not matching the colorkey value are copied.</P
></TD
></TR
><TR
><TD
ALIGN="LEFT"
VALIGN="TOP"
>RGB-&#62;RGB without <TT
CLASS="LITERAL"
>SDL_SRCALPHA</TT
></TD
><TD
ALIGN="LEFT"
VALIGN="TOP"
><P
>The RGB data is copied from the source. If <TT
CLASS="LITERAL"
>SDL_SRCCOLORKEY</TT
> is set, only the pixels not matching the colorkey value are copied.</P
></TD
></TR
></TBODY
></TABLE
><P
></P
></DIV
><DIV
CLASS="NOTE"
><BLOCKQUOTE
CLASS="NOTE"
><P
><B
>Note: </B
> Note that RGBA-&#62;RGBA blits (with SDL_SRCALPHA set) keep the alpha
of the destination surface. This means that you cannot compose two arbitrary
RGBA surfaces this way and get the result you would expect from "overlaying"
them; the destination alpha will work as a mask.</P
><P
>Also note that per-pixel and per-surface alpha cannot be combined;
the per-pixel alpha is always used if available</P
></BLOCKQUOTE
></DIV
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN2179"
></A
><H2
>Return Value</H2
><P
>This function returns <SPAN
CLASS="RETURNVALUE"
>0</SPAN
>, or
<SPAN
CLASS="RETURNVALUE"
>-1</SPAN
> if there was an error.</P
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN2184"
></A
><H2
>See Also</H2
><P
><A
HREF="sdlmaprgba.html"
><TT
CLASS="FUNCTION"
>SDL_MapRGBA</TT
></A
>,
<A
HREF="sdlgetrgba.html"
><TT
CLASS="FUNCTION"
>SDL_GetRGBA</TT
></A
>,
<A
HREF="sdldisplayformatalpha.html"
><TT
CLASS="FUNCTION"
>SDL_DisplayFormatAlpha</TT
></A
>,
<A
HREF="sdlblitsurface.html"
><TT
CLASS="FUNCTION"
>SDL_BlitSurface</TT
></A
></P
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="sdlsetcolorkey.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="index.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="sdlsetcliprect.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>SDL_SetColorKey</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="video.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>SDL_SetClipRect</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>