view test/testwm.c @ 876:9e84d106ec19

(Said Max Horn on the SDL mailing list...) Hi folks, based on Eric Wing's patch, I created the attached patch which fixes the OpenGL coordinate inversion bug in SDL. It works fine over here on 10.3 with Ryan's test program (which I also attached). There is another change in it: I removed the "- 1" in the two lines using CGDisplayPixelsHigh()... while I understand from a logical point of view why they *should* be correct, I checked the actual values computed that way, and they were off-by-one. After removing the " - 1", the returned mouse coordinates are correct. I checked this by moving the mouse to the screen top/bottom in fullscreen mode, BTW. With the change, the proper values 0 and 479 are returned (in 640x480 mode). Sam, you may still want to test on 10.1, it's very simple using Ryan's minimal test code :-) Cheers, Max (Here is the reproduction case for revision history's sake...) /* * To compile: * gcc -o test test.c `sdl-config --cflags` `sdl-config --libs` -framework OpenGL * * --ryan. */ #include <stdio.h> #include "SDL.h" #include "SDL_opengl.h" int main(int argc, char **argv) { Uint32 flags = SDL_OPENGL /* | SDL_FULLSCREEN */; SDL_Surface *screen; SDL_Event event; int done = 0; GLfloat ratio; SDL_Init(SDL_INIT_VIDEO); SDL_ShowCursor(0); if ((argv[1]) && (strcmp(argv[1], "--grab") == 0)) SDL_WM_GrabInput(SDL_GRAB_ON); screen = SDL_SetVideoMode(640, 480, 0, flags); if (!screen) return(42); ratio = ((GLfloat) screen->w) / ((GLfloat) screen->h); glClearColor( 0.0f, 0.0f, 0.0f, 0.0f ); glClearDepth( 1.0f ); glEnable( GL_DEPTH_TEST ); glDepthFunc( GL_LEQUAL ); glViewport( 0, 0, screen->w, screen->h); glMatrixMode( GL_PROJECTION ); glLoadIdentity(); gluPerspective( 45.0f, ratio, 0.1f, 100.0f ); glMatrixMode( GL_MODELVIEW ); glLoadIdentity(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); SDL_GL_SwapBuffers(); // eh, close enough. #define MAX_X 6.12 #define MAX_Y 4.50 while (!done) { int x, y; GLfloat glx, gly; if (!SDL_WaitEvent(&event)) break; switch (event.type) { case SDL_KEYUP: if (event.key.keysym.sym == SDLK_ESCAPE) done = 1; break; } SDL_GetMouseState(&x, &y); glx = ((((GLfloat) x) / ((GLfloat) screen->w)) - 0.5f) * MAX_X; gly = ((((GLfloat) y) / ((GLfloat) screen->h)) - 0.5f) * MAX_Y; glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glTranslatef(glx,-gly,-6.0f); glBegin(GL_TRIANGLES); glColor3f(1,0,0); glVertex3f( 0.00f, 0.25f, 0.00f); glColor3f(0,1,0); glVertex3f(-0.25f, -0.25f, 0.00f); glColor3f(0,0,1); glVertex3f( 0.25f, -0.25f, 0.00f); glEnd(); SDL_GL_SwapBuffers(); } SDL_Quit(); return(0); } /* end of test.c ... */
author Ryan C. Gordon <icculus@icculus.org>
date Mon, 22 Mar 2004 09:38:20 +0000
parents 3eddf51b649b
children be9c9c8f6d53
line wrap: on
line source


/* Test out the window manager interaction functions */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "SDL.h"

/* Is the cursor visible? */
static int visible = 1;

static Uint8  video_bpp;
static Uint32 video_flags;

int SetVideoMode(int w, int h)
{
	SDL_Surface *screen;
	int i;
	Uint8 *buffer;
	SDL_Color palette[256];

	screen = SDL_SetVideoMode(w, h, video_bpp, video_flags);
	if (  screen == NULL ) {
		fprintf(stderr, "Couldn't set %dx%dx%d video mode: %s\n",
					w, h, video_bpp, SDL_GetError());
		return(-1);
	}
	printf("Running in %s mode\n", screen->flags & SDL_FULLSCREEN ?
						"fullscreen" : "windowed");

	/* Set the surface pixels and refresh! */
	for ( i=0; i<256; ++i ) {
		palette[i].r = 255-i;
		palette[i].g = 255-i;
		palette[i].b = 255-i;
	}
	SDL_SetColors(screen, palette, 0, 256);
	if ( SDL_LockSurface(screen) < 0 ) {
		fprintf(stderr, "Couldn't lock display surface: %s\n",
							SDL_GetError());
		return(-1);
	}
	buffer = (Uint8 *)screen->pixels;
	for ( i=0; i<screen->h; ++i ) {
		memset(buffer,(i*255)/screen->h,
				screen->w*screen->format->BytesPerPixel);
		buffer += screen->pitch;
	}
	SDL_UnlockSurface(screen);
	SDL_UpdateRect(screen, 0, 0, 0, 0);

	return(0);
}

SDL_Surface *LoadIconSurface(char *file, Uint8 **maskp)
{
	SDL_Surface *icon;
	Uint8       *pixels;
	Uint8       *mask;
	int          mlen, i, j;

	*maskp = NULL;

	/* Load the icon surface */
	icon = SDL_LoadBMP(file);
	if ( icon == NULL ) {
		fprintf(stderr, "Couldn't load %s: %s\n", file, SDL_GetError());
		return(NULL);
	}

	/* Check width and height 
	if ( (icon->w%8) != 0 ) {
		fprintf(stderr, "Icon width must be a multiple of 8!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}
*/
    
    
	if ( icon->format->palette == NULL ) {
		fprintf(stderr, "Icon must have a palette!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}

	/* Set the colorkey */
	SDL_SetColorKey(icon, SDL_SRCCOLORKEY, *((Uint8 *)icon->pixels));

	/* Create the mask */
	pixels = (Uint8 *)icon->pixels;
	printf("Transparent pixel: (%d,%d,%d)\n",
				icon->format->palette->colors[*pixels].r,
				icon->format->palette->colors[*pixels].g,
				icon->format->palette->colors[*pixels].b);
	mlen = (icon->w*icon->h + 7) / 8;
	mask = (Uint8 *)malloc(mlen);
	if ( mask == NULL ) {
		fprintf(stderr, "Out of memory!\n");
		SDL_FreeSurface(icon);
		return(NULL);
	}
	memset(mask, 0, mlen);
	for ( i=0; i < icon->h; i++)
        for (j=0; j < icon->w; j++) {
            int pindex = i * icon->pitch + j;
            int mindex = i * icon->w + j;
            if ( pixels[pindex] != *pixels )
                mask[mindex>>3] |= 1 << (7 - (mindex & 7));
        }
	*maskp = mask;
	return(icon);
}

void HotKey_ToggleFullScreen(void)
{
	SDL_Surface *screen;

	screen = SDL_GetVideoSurface();
	if ( SDL_WM_ToggleFullScreen(screen) ) {
		printf("Toggled fullscreen mode - now %s\n",
		    (screen->flags&SDL_FULLSCREEN) ? "fullscreen" : "windowed");
	} else {
		printf("Unable to toggle fullscreen mode\n");
		video_flags ^= SDL_FULLSCREEN;
		SetVideoMode(screen->w, screen->h);
	}
}

void HotKey_ToggleGrab(void)
{
	SDL_GrabMode mode;

	printf("Ctrl-G: toggling input grab!\n");
	mode = SDL_WM_GrabInput(SDL_GRAB_QUERY);
	if ( mode == SDL_GRAB_ON ) {
		printf("Grab was on\n");
	} else {
		printf("Grab was off\n");
	}
	mode = SDL_WM_GrabInput(mode ? SDL_GRAB_OFF : SDL_GRAB_ON);
	if ( mode == SDL_GRAB_ON ) {
		printf("Grab is now on\n");
	} else {
		printf("Grab is now off\n");
	}
}

void HotKey_Iconify(void)
{
	printf("Ctrl-Z: iconifying window!\n");
	SDL_WM_IconifyWindow();
}

void HotKey_Quit(void)
{
	SDL_Event event;

	printf("Posting internal quit request\n");
	event.type = SDL_USEREVENT;
	SDL_PushEvent(&event);
}

int FilterEvents(const SDL_Event *event)
{
	static int reallyquit = 0;

	switch (event->type) {

		case SDL_ACTIVEEVENT:
			/* See what happened */
			printf("App %s ",
				event->active.gain ? "gained" : "lost");
			if ( event->active.state & SDL_APPACTIVE )
				printf("active ");
			if ( event->active.state & SDL_APPMOUSEFOCUS )
				printf("mouse ");
			if ( event->active.state & SDL_APPINPUTFOCUS )
				printf("input ");
			printf("focus\n");

			/* See if we are iconified or restored */
			if ( event->active.state & SDL_APPACTIVE ) {
				printf("App has been %s\n",
					event->active.gain ?
						 "restored" : "iconified");
			}
			return(0);

		/* We want to toggle visibility on buttonpress */
		case SDL_MOUSEBUTTONDOWN:
		case SDL_MOUSEBUTTONUP:
			if ( event->button.state == SDL_PRESSED ) {
				visible = !visible;
				SDL_ShowCursor(visible);
			}
			printf("Mouse button %d has been %s\n",
				event->button.button,
				(event->button.state == SDL_PRESSED) ?
						"pressed" : "released");
			return(0);

		/* Show relative mouse motion */
		case SDL_MOUSEMOTION:
#if 0
			printf("Mouse relative motion: {%d,%d}\n",
				event->motion.xrel, event->motion.yrel);
#endif
			return(0);

		case SDL_KEYDOWN:
			if ( event->key.keysym.sym == SDLK_ESCAPE ) {
				HotKey_Quit();
			}
			if ( (event->key.keysym.sym == SDLK_g) &&
			     (event->key.keysym.mod & KMOD_CTRL) ) {
				HotKey_ToggleGrab();
			}
			if ( (event->key.keysym.sym == SDLK_z) &&
			     (event->key.keysym.mod & KMOD_CTRL) ) {
				HotKey_Iconify();
			}
			if ( (event->key.keysym.sym == SDLK_RETURN) &&
			     (event->key.keysym.mod & KMOD_ALT) ) {
				HotKey_ToggleFullScreen();
			}
			return(0);

		/* Pass the video resize event through .. */
		case SDL_VIDEORESIZE:
			return(1);

		/* This is important!  Queue it if we want to quit. */
		case SDL_QUIT:
			if ( ! reallyquit ) {
				reallyquit = 1;
				printf("Quit requested\n");
				return(0);
			}
			printf("Quit demanded\n");
			return(1);

		/* This will never happen because events queued directly
		   to the event queue are not filtered.
		 */
		case SDL_USEREVENT:
			return(1);

		/* Drop all other events */
		default:
			return(0);
	}
}

int main(int argc, char *argv[])
{
	SDL_Event event;
	char *title;
	SDL_Surface *icon;
	Uint8 *icon_mask;
	int parsed;
	int w, h;

	if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) {
		fprintf(stderr,
			"Couldn't initialize SDL: %s\n", SDL_GetError());
		exit(1);
	}
	atexit(SDL_Quit);

	/* Check command line arguments */
	w = 640;
	h = 480;
	video_bpp = 8;
	video_flags = SDL_SWSURFACE;
	parsed = 1;
	while ( parsed ) {
		if ( (argc >= 2) && (strcmp(argv[1], "-fullscreen") == 0) ) {
			video_flags |= SDL_FULLSCREEN;
			argc -= 1;
			argv += 1;
		} else
		if ( (argc >= 2) && (strcmp(argv[1], "-resize") == 0) ) {
			video_flags |= SDL_RESIZABLE;
			argc -= 1;
			argv += 1;
		} else
		if ( (argc >= 2) && (strcmp(argv[1], "-noframe") == 0) ) {
			video_flags |= SDL_NOFRAME;
			argc -= 1;
			argv += 1;
		} else
		if ( (argc >= 3) && (strcmp(argv[1], "-width") == 0) ) {
			w = atoi(argv[2]);
			argc -= 2;
			argv += 2;
		} else
		if ( (argc >= 3) && (strcmp(argv[1], "-height") == 0) ) {
			h = atoi(argv[2]);
			argc -= 2;
			argv += 2;
		} else
		if ( (argc >= 3) && (strcmp(argv[1], "-bpp") == 0) ) {
			video_bpp = atoi(argv[2]);
			argc -= 2;
			argv += 2;
		} else {
			parsed = 0;
		}
	}

	/* Set the icon -- this must be done before the first mode set */
	icon = LoadIconSurface("icon.bmp", &icon_mask);
	if ( icon != NULL ) {
		SDL_WM_SetIcon(icon, icon_mask);
	}
	if ( icon_mask != NULL )
		free(icon_mask);

	/* Set the title bar */
	if ( argv[1] == NULL )
		title = "Testing  1.. 2.. 3...";
	else
		title = argv[1];
	SDL_WM_SetCaption(title, "testwm");

	/* See if it's really set */
	SDL_WM_GetCaption(&title, NULL);
	if ( title )
		printf("Title was set to: %s\n", title);
	else
		printf("No window title was set!\n");

	/* Initialize the display */
	if ( SetVideoMode(w, h) < 0 ) {
		return(1);
	}

	/* Set an event filter that discards everything but QUIT */
	SDL_SetEventFilter(FilterEvents);

	/* Ignore key up events, they don't even get filtered */
	SDL_EventState(SDL_KEYUP, SDL_IGNORE);

	/* Loop, waiting for QUIT */
	while ( SDL_WaitEvent(&event) ) {
		switch (event.type) {
			case SDL_VIDEORESIZE:
				printf("Got a resize event: %dx%d\n",
				       event.resize.w, event.resize.h);
				SetVideoMode(event.resize.w, event.resize.h);
				break;
			case SDL_USEREVENT:
				printf("Handling internal quit request\n");
				/* Fall through to the quit handler */
			case SDL_QUIT:
				printf("Bye bye..\n");
				return(0);
			default:
				/* This should never happen */
				printf("Warning: Event %d wasn't filtered\n",
								event.type);
				break;
		}
	}
	printf("SDL_WaitEvent() error: %s\n", SDL_GetError());
	return(255);
}