Mercurial > sdl-ios-xcode
view test/testwin.c @ 1585:980d2a0dc2a3
Date: Tue, 4 Mar 2003 15:05:31 -0800
From: "Jim"
Subject: [SDL] Frame Buffer patches...
Okay I'm new at patch generation - so please tell me if there's a better way
I could have done this.
Attached are two patch files generated with 'cvs diff -u'
SDL-fb-open-lock.patch applies to SDL_fbvideo.c
Modifies the open loop to check /dev/fb/0 found on devfs...
Modifies the lock code to return failure if the current virtual terminal
is not the one opened for frame buffer writing...
Lock would hang forever if switched away (ctrl-alt-F1) ...
SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c
Switches default mouse mode based on SDL_MOUSEDRV - currently only
accepts PS2 - otherwise default is MS Mouse.
When the screen is switched - exisiting code (wrapped in ifdef
SAVE_SCREEN_COTENTS) would save the wrong bit of the screen....
( I run frame buffer 1600x1200, the size I requested was 800x600 - the
save would save the top 800 lines (non biased) and restore them... Adding
screen->offset fixed that )
However, if that option is not set, then a call to SDL_UpdateRect (full
screen) is made. (which may have had it's contents changed since the screen
is not entirely locked because of lock-failure patch)
Jim
[patches slightly tweaked for SDL 1.2.10]
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Wed, 22 Mar 2006 07:48:22 +0000 |
parents | 51a8702d8ecd |
children | 14717b52abc0 |
line wrap: on
line source
/* Bring up a window and play with it */ #include <stdlib.h> #include <stdio.h> #include <string.h> #define BENCHMARK_SDL #define NOTICE(X) printf("%s", X); #include "SDL.h" /* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */ static void quit(int rc) { SDL_Quit(); exit(rc); } void DrawPict(SDL_Surface *screen, char *bmpfile, int speedy, int flip, int nofade) { SDL_Surface *picture; SDL_Rect dest, update; int i, centered; int ncolors; SDL_Color *colors, *cmap; /* Load the image into a surface */ if ( bmpfile == NULL ) { bmpfile = "sample.bmp"; /* Sample image */ } fprintf(stderr, "Loading picture: %s\n", bmpfile); picture = SDL_LoadBMP(bmpfile); if ( picture == NULL ) { fprintf(stderr, "Couldn't load %s: %s\n", bmpfile, SDL_GetError()); return; } /* Set the display colors -- on a hicolor display this is a no-op */ if ( picture->format->palette ) { ncolors = picture->format->palette->ncolors; colors = (SDL_Color *)malloc(ncolors*sizeof(SDL_Color)); cmap = (SDL_Color *)malloc(ncolors*sizeof(SDL_Color)); memcpy(colors, picture->format->palette->colors, ncolors*sizeof(SDL_Color)); } else { int r, g, b; /* Allocate 256 color palette */ ncolors = 256; colors = (SDL_Color *)malloc(ncolors*sizeof(SDL_Color)); cmap = (SDL_Color *)malloc(ncolors*sizeof(SDL_Color)); /* Set a 3,3,2 color cube */ for ( r=0; r<8; ++r ) { for ( g=0; g<8; ++g ) { for ( b=0; b<4; ++b ) { i = ((r<<5)|(g<<2)|b); colors[i].r = r<<5; colors[i].g = g<<5; colors[i].b = b<<6; } } } } NOTICE("testwin: setting colors\n"); if ( ! SDL_SetColors(screen, colors, 0, ncolors) && (screen->format->palette != NULL) ) { fprintf(stderr, "Warning: Couldn't set all of the colors, but SDL will map the image\n" " (colormap fading will suffer - try the -warp option)\n" ); } /* Set the screen to black (not really necessary) */ if ( SDL_LockSurface(screen) == 0 ) { Uint32 black; Uint8 *pixels; black = SDL_MapRGB(screen->format, 0, 0, 0); pixels = (Uint8 *)screen->pixels; for ( i=0; i<screen->h; ++i ) { memset(pixels, black, screen->w*screen->format->BytesPerPixel); pixels += screen->pitch; } SDL_UnlockSurface(screen); SDL_UpdateRect(screen, 0, 0, 0, 0); } /* Display the picture */ if ( speedy ) { SDL_Surface *displayfmt; fprintf(stderr, "Converting picture\n"); displayfmt = SDL_DisplayFormat(picture); if ( displayfmt == NULL ) { fprintf(stderr, "Couldn't convert image: %s\n", SDL_GetError()); goto done; } SDL_FreeSurface(picture); picture = displayfmt; } printf("(image surface located in %s memory)\n", (picture->flags&SDL_HWSURFACE) ? "video" : "system"); centered = (screen->w - picture->w)/2; if ( centered < 0 ) { centered = 0; } dest.y = (screen->h - picture->h)/2; dest.w = picture->w; dest.h = picture->h; NOTICE("testwin: moving image\n"); for ( i=0; i<=centered; ++i ) { dest.x = i; update = dest; if ( SDL_BlitSurface(picture, NULL, screen, &update) < 0 ) { fprintf(stderr, "Blit failed: %s\n", SDL_GetError()); break; } if ( flip ) { SDL_Flip(screen); } else { SDL_UpdateRects(screen, 1, &update); } } #ifdef SCREENSHOT if ( SDL_SaveBMP(screen, "screen.bmp") < 0 ) printf("Couldn't save screen: %s\n", SDL_GetError()); #endif #ifndef BENCHMARK_SDL /* Let it sit there for a while */ SDL_Delay(5*1000); #endif /* Fade the colormap */ if ( ! nofade ) { int maxstep; SDL_Color final; SDL_Color palcolors[256]; struct { Sint16 r, g, b; } cdist[256]; NOTICE("testwin: fading out...\n"); memcpy(cmap, colors, ncolors*sizeof(SDL_Color)); maxstep = 32-1; final.r = 0xFF; final.g = 0x00; final.b = 0x00; memcpy(palcolors, colors, ncolors*sizeof(SDL_Color)); for ( i=0; i<ncolors; ++i ) { cdist[i].r = final.r-palcolors[i].r; cdist[i].g = final.g-palcolors[i].g; cdist[i].b = final.b-palcolors[i].b; } for ( i=0; i<=maxstep/2; ++i ) { /* halfway fade */ int c; for ( c=0; c<ncolors; ++c ) { colors[c].r = palcolors[c].r+((cdist[c].r*i))/maxstep; colors[c].g = palcolors[c].g+((cdist[c].g*i))/maxstep; colors[c].b = palcolors[c].b+((cdist[c].b*i))/maxstep; } SDL_SetColors(screen, colors, 0, ncolors); SDL_Delay(1); } final.r = 0x00; final.g = 0x00; final.b = 0x00; memcpy(palcolors, colors, ncolors*sizeof(SDL_Color)); for ( i=0; i<ncolors; ++i ) { cdist[i].r = final.r-palcolors[i].r; cdist[i].g = final.g-palcolors[i].g; cdist[i].b = final.b-palcolors[i].b; } maxstep /= 2; for ( i=0; i<=maxstep; ++i ) { /* finish fade out */ int c; for ( c=0; c<ncolors; ++c ) { colors[c].r = palcolors[c].r+((cdist[c].r*i))/maxstep; colors[c].g = palcolors[c].g+((cdist[c].g*i))/maxstep; colors[c].b = palcolors[c].b+((cdist[c].b*i))/maxstep; } SDL_SetColors(screen, colors, 0, ncolors); SDL_Delay(1); } for ( i=0; i<ncolors; ++i ) { colors[i].r = final.r; colors[i].g = final.g; colors[i].b = final.b; } SDL_SetColors(screen, colors, 0, ncolors); NOTICE("testwin: fading in...\n"); memcpy(palcolors, colors, ncolors*sizeof(SDL_Color)); for ( i=0; i<ncolors; ++i ) { cdist[i].r = cmap[i].r-palcolors[i].r; cdist[i].g = cmap[i].g-palcolors[i].g; cdist[i].b = cmap[i].b-palcolors[i].b; } for ( i=0; i<=maxstep; ++i ) { /* 32 step fade in */ int c; for ( c=0; c<ncolors; ++c ) { colors[c].r = palcolors[c].r+((cdist[c].r*i))/maxstep; colors[c].g = palcolors[c].g+((cdist[c].g*i))/maxstep; colors[c].b = palcolors[c].b+((cdist[c].b*i))/maxstep; } SDL_SetColors(screen, colors, 0, ncolors); SDL_Delay(1); } NOTICE("testwin: fading over\n"); } done: /* Free the picture and return */ SDL_FreeSurface(picture); free(colors); free(cmap); return; } int main(int argc, char *argv[]) { SDL_Surface *screen; /* Options */ int speedy, flip, nofade; int delay; int w, h; int desired_bpp; Uint32 video_flags; #ifdef BENCHMARK_SDL Uint32 then, now; #endif /* Set default options and check command-line */ speedy = 0; flip = 0; nofade = 0; delay = 1; #ifdef _WIN32_WCE w = 640; h = 320; desired_bpp = 0; video_flags = SDL_FULLSCREEN; #else w = 640; h = 480; desired_bpp = 0; video_flags = 0; #endif if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) { fprintf(stderr, "Couldn't initialize SDL: %s\n", SDL_GetError()); return(1); } while ( argc > 1 ) { if ( strcmp(argv[1], "-speedy") == 0 ) { speedy = 1; argv += 1; argc -= 1; } else if ( strcmp(argv[1], "-nofade") == 0 ) { nofade = 1; argv += 1; argc -= 1; } else if ( strcmp(argv[1], "-delay") == 0 ) { if ( argv[2] ) { delay = atoi(argv[2]); argv += 2; argc -= 2; } else { fprintf(stderr, "The -delay option requires an argument\n"); quit(1); } } else if ( strcmp(argv[1], "-width") == 0 ) { if ( argv[2] && ((w = atoi(argv[2])) > 0) ) { argv += 2; argc -= 2; } else { fprintf(stderr, "The -width option requires an argument\n"); quit(1); } } else if ( strcmp(argv[1], "-height") == 0 ) { if ( argv[2] && ((h = atoi(argv[2])) > 0) ) { argv += 2; argc -= 2; } else { fprintf(stderr, "The -height option requires an argument\n"); quit(1); } } else if ( strcmp(argv[1], "-bpp") == 0 ) { if ( argv[2] ) { desired_bpp = atoi(argv[2]); argv += 2; argc -= 2; } else { fprintf(stderr, "The -bpp option requires an argument\n"); quit(1); } } else if ( strcmp(argv[1], "-warp") == 0 ) { video_flags |= SDL_HWPALETTE; argv += 1; argc -= 1; } else if ( strcmp(argv[1], "-hw") == 0 ) { video_flags |= SDL_HWSURFACE; argv += 1; argc -= 1; } else if ( strcmp(argv[1], "-flip") == 0 ) { video_flags |= SDL_DOUBLEBUF; argv += 1; argc -= 1; } else if ( strcmp(argv[1], "-fullscreen") == 0 ) { video_flags |= SDL_FULLSCREEN; argv += 1; argc -= 1; } else break; } /* Initialize the display */ screen = SDL_SetVideoMode(w, h, desired_bpp, video_flags); if ( screen == NULL ) { fprintf(stderr, "Couldn't set %dx%dx%d video mode: %s\n", w, h, desired_bpp, SDL_GetError()); quit(1); } printf("Set%s %dx%dx%d mode\n", screen->flags & SDL_FULLSCREEN ? " fullscreen" : "", screen->w, screen->h, screen->format->BitsPerPixel); printf("(video surface located in %s memory)\n", (screen->flags&SDL_HWSURFACE) ? "video" : "system"); if ( screen->flags & SDL_DOUBLEBUF ) { printf("Double-buffering enabled\n"); flip = 1; } /* Set the window manager title bar */ SDL_WM_SetCaption("SDL test window", "testwin"); /* Do all the drawing work */ #ifdef BENCHMARK_SDL then = SDL_GetTicks(); DrawPict(screen, argv[1], speedy, flip, nofade); now = SDL_GetTicks(); printf("Time: %d milliseconds\n", now-then); #else DrawPict(screen, argv[1], speedy, flip, nofade); #endif SDL_Delay(delay*1000); SDL_Quit(); return(0); }