Mercurial > sdl-ios-xcode

view test/testfile.c @ 1585:980d2a0dc2a3

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents b2b476a4a73c
children 14717b52abc0
line wrap: on
line source


/* sanity tests on SDL_rwops.c (usefull for alternative implementations of stdio rwops) */

#include <stdlib.h>

#include "SDL.h"
#include "SDL_endian.h"


#include <stdio.h>	

/* WARNING ! those 2 files will be destroyed by this test program */
#define FBASENAME1	"sdldata1"		/* this file will be created during tests */
#define FBASENAME2	"sdldata2"		/* this file should not exists before starting test */


#ifndef NULL
#define NULL ((void *)0)
#endif 

static void cleanup( void ) {

	unlink(FBASENAME1);
	unlink(FBASENAME2); 
}

static void rwops_error_quit( unsigned line, SDL_RWops *rwops) {
	
	printf("testfile.c(%d): failed\n",line);
	if (rwops) {
		rwops->close(rwops); /* This calls SDL_FreeRW(rwops); */
	}
	cleanup();
	exit(1); /* quit with rwops error (test failed) */
}

#define RWOP_ERR_QUIT(x)	rwops_error_quit( __LINE__, (x) )



int main(int argc, char *argv[])
{
	SDL_RWops *rwops = NULL;
	char test_buf[30];
	
	cleanup();

/* test 1 : basic argument test: all those calls to SDL_RWFromFile should fail */
	
	rwops = SDL_RWFromFile(NULL,NULL);
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(NULL,"ab+");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(NULL,"sldfkjsldkfj");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile("something","");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile("something",NULL);
	if (rwops) RWOP_ERR_QUIT(rwops);	
	printf("test1 OK\n");

/* test 2 : check that inexistant file is not successfully opened/created when required */
/* modes : r, r+ implie that file MUST exist 
   modes : a, a+, w, w+ checks that it succeeds (file may not exists)
   
 */
	rwops = SDL_RWFromFile(FBASENAME2,"rb"); /* this file doesn't exist that call must fail */
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(FBASENAME2,"rb+"); /* this file doesn't exist that call must fail */
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(FBASENAME2,"wb");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"wb+");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"ab"); 
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"ab+");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	printf("test2 OK\n");

/* test 3 : creation, writing , reading, seeking, 
	        test : w mode, r mode, w+ mode
 */
	rwops = SDL_RWFromFile(FBASENAME1,"wb"); /* write only */	
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in write only mode */
	rwops->close(rwops);

	rwops = SDL_RWFromFile(FBASENAME1,"rb"); /* read mode, file must exists */
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	if (0!=rwops->write(rwops,test_buf,1,1))			RWOP_ERR_QUIT(rwops); /* readonly mode */
	rwops->close(rwops);

/* test 3: same with w+ mode */
	rwops = SDL_RWFromFile(FBASENAME1,"wb+"); /* write + read + truncation */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in read/write mode */
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test3 OK\n");

/* test 4: same in r+ mode */
	rwops = SDL_RWFromFile(FBASENAME1,"rb+"); /* write + read + file must exists, no truncation */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in read/write mode */
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test4 OK\n");

/* test5 : append mode */
	rwops = SDL_RWFromFile(FBASENAME1,"ab+"); /* write + read + append */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops); 	
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); 
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	
	if (20+27!=rwops->seek(rwops,-7,RW_SEEK_END))		RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	
	if (27!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);
	
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);
	if (3!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"123456789012345678901234567123",30))	
														RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test5 OK\n");
	cleanup();
	return 0; /* all ok */
}