Mercurial > sdl-ios-xcode
view src/video/wscons/SDL_wsconsvideo.c @ 1585:980d2a0dc2a3
Date: Tue, 4 Mar 2003 15:05:31 -0800
From: "Jim"
Subject: [SDL] Frame Buffer patches...
Okay I'm new at patch generation - so please tell me if there's a better way
I could have done this.
Attached are two patch files generated with 'cvs diff -u'
SDL-fb-open-lock.patch applies to SDL_fbvideo.c
Modifies the open loop to check /dev/fb/0 found on devfs...
Modifies the lock code to return failure if the current virtual terminal
is not the one opened for frame buffer writing...
Lock would hang forever if switched away (ctrl-alt-F1) ...
SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c
Switches default mouse mode based on SDL_MOUSEDRV - currently only
accepts PS2 - otherwise default is MS Mouse.
When the screen is switched - exisiting code (wrapped in ifdef
SAVE_SCREEN_COTENTS) would save the wrong bit of the screen....
( I run frame buffer 1600x1200, the size I requested was 800x600 - the
save would save the top 800 lines (non biased) and restore them... Adding
screen->offset fixed that )
However, if that option is not set, then a call to SDL_UpdateRect (full
screen) is made. (which may have had it's contents changed since the screen
is not entirely locked because of lock-failure patch)
Jim
[patches slightly tweaked for SDL 1.2.10]
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Wed, 22 Mar 2006 07:48:22 +0000 |
parents | 8d9bb0cf2c2a |
children | 56f952883795 |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2006 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ #include "SDL_config.h" #include <sys/time.h> #include <sys/mman.h> #include <sys/ioctl.h> #include <dev/wscons/wsdisplay_usl_io.h> #include <fcntl.h> #include <unistd.h> #include <errno.h> #include "SDL_video.h" #include "SDL_mouse.h" #include "../SDL_sysvideo.h" #include "../SDL_pixels_c.h" #include "../../events/SDL_events_c.h" #include "SDL_wsconsvideo.h" #include "SDL_wsconsevents_c.h" #include "SDL_wsconsmouse_c.h" #define WSCONSVID_DRIVER_NAME "wscons" enum { WSCONS_ROTATE_NONE = 0, WSCONS_ROTATE_CCW = 90, WSCONS_ROTATE_UD = 180, WSCONS_ROTATE_CW = 270 }; #define min(a,b) ((a)<(b)?(a):(b)) /* Initialization/Query functions */ static int WSCONS_VideoInit(_THIS, SDL_PixelFormat *vformat); static SDL_Rect **WSCONS_ListModes(_THIS, SDL_PixelFormat *format, Uint32 flags); static SDL_Surface *WSCONS_SetVideoMode(_THIS, SDL_Surface *current, int width, int height, int bpp, Uint32 flags); static int WSCONS_SetColors(_THIS, int firstcolor, int ncolors, SDL_Color *colors); static void WSCONS_VideoQuit(_THIS); /* Hardware surface functions */ static int WSCONS_AllocHWSurface(_THIS, SDL_Surface *surface); static int WSCONS_LockHWSurface(_THIS, SDL_Surface *surface); static void WSCONS_UnlockHWSurface(_THIS, SDL_Surface *surface); static void WSCONS_FreeHWSurface(_THIS, SDL_Surface *surface); /* etc. */ static WSCONS_bitBlit WSCONS_blit16; static WSCONS_bitBlit WSCONS_blit16blocked; static void WSCONS_UpdateRects(_THIS, int numrects, SDL_Rect *rects); void WSCONS_ReportError(char *fmt, ...) { char message[200]; message[199] = '\0'; va_list vaArgs; va_start(vaArgs, fmt); vsnprintf(message, 199, fmt, vaArgs); va_end(vaArgs); SDL_SetError(message); fprintf(stderr, "WSCONS error: %s\n", message); } /* WSCONS driver bootstrap functions */ static int WSCONS_Available(void) { return 1; } static void WSCONS_DeleteDevice(SDL_VideoDevice *device) { SDL_free(device->hidden); SDL_free(device); } static SDL_VideoDevice *WSCONS_CreateDevice(int devindex) { SDL_VideoDevice *device; /* Initialize all variables that we clean on shutdown */ device = (SDL_VideoDevice *)SDL_malloc(sizeof(SDL_VideoDevice)); if (device == NULL) { SDL_OutOfMemory(); return 0; } SDL_memset(device, 0, (sizeof *device)); device->hidden = (struct SDL_PrivateVideoData *)SDL_malloc((sizeof *device->hidden)); if (device->hidden == NULL) { SDL_OutOfMemory(); SDL_free(device); return(0); } SDL_memset(device->hidden, 0, (sizeof *device->hidden)); device->hidden->fd = -1; /* Set the function pointers */ device->VideoInit = WSCONS_VideoInit; device->ListModes = WSCONS_ListModes; device->SetVideoMode = WSCONS_SetVideoMode; device->SetColors = WSCONS_SetColors; device->UpdateRects = WSCONS_UpdateRects; device->VideoQuit = WSCONS_VideoQuit; device->AllocHWSurface = WSCONS_AllocHWSurface; device->LockHWSurface = WSCONS_LockHWSurface; device->UnlockHWSurface = WSCONS_UnlockHWSurface; device->FreeHWSurface = WSCONS_FreeHWSurface; device->InitOSKeymap = WSCONS_InitOSKeymap; device->PumpEvents = WSCONS_PumpEvents; device->free = WSCONS_DeleteDevice; return device; } VideoBootStrap WSCONS_bootstrap = { WSCONSVID_DRIVER_NAME, "SDL wscons video driver", WSCONS_Available, WSCONS_CreateDevice }; #define WSCONSDEV_FORMAT "/dev/ttyC%01x" int WSCONS_VideoInit(_THIS, SDL_PixelFormat *vformat) { char devnamebuf[30]; char *devname; char *rotation; int wstype; int wsmode = WSDISPLAYIO_MODE_DUMBFB; size_t len, mapsize; int pagemask; int width, height; devname = SDL_getenv("SDL_WSCONSDEV"); if (devname == NULL) { int activeVT; if (ioctl(STDIN_FILENO, VT_GETACTIVE, &activeVT) == -1) { WSCONS_ReportError("Unable to determine active terminal: %s", strerror(errno)); return -1; } SDL_snprintf(devnamebuf, sizeof(devnamebuf), WSCONSDEV_FORMAT, activeVT - 1); devname = devnamebuf; } private->fd = open(devname, O_RDWR | O_NONBLOCK, 0); if (private->fd == -1) { WSCONS_ReportError("open %s: %s", devname, strerror(errno)); return -1; } if (ioctl(private->fd, WSDISPLAYIO_GINFO, &private->info) == -1) { WSCONS_ReportError("ioctl WSDISPLAY_GINFO: %s", strerror(errno)); return -1; } if (ioctl(private->fd, WSDISPLAYIO_GTYPE, &wstype) == -1) { WSCONS_ReportError("ioctl WSDISPLAY_GTYPE: %s", strerror(errno)); return -1; } if (ioctl(private->fd, WSDISPLAYIO_LINEBYTES, &private->physlinebytes) == -1) { WSCONS_ReportError("ioctl WSDISPLAYIO_LINEBYTES: %s", strerror(errno)); return -1; } if (private->info.depth > 8) { if (wstype == WSDISPLAY_TYPE_SUN24 || wstype == WSDISPLAY_TYPE_SUNCG12 || wstype == WSDISPLAY_TYPE_SUNCG14 || wstype == WSDISPLAY_TYPE_SUNTCX || wstype == WSDISPLAY_TYPE_SUNFFB) { private->redMask = 0x0000ff; private->greenMask = 0x00ff00; private->blueMask = 0xff0000; #ifdef WSDISPLAY_TYPE_PXALCD } else if (wstype == WSDISPLAY_TYPE_PXALCD) { private->redMask = 0x1f << 11; private->greenMask = 0x3f << 5; private->blueMask = 0x1f; #endif } else { WSCONS_ReportError("Unknown video hardware"); return -1; } } else { WSCONS_ReportError("Displays with 8 bpp or less are not supported"); return -1; } private->rotate = WSCONS_ROTATE_NONE; rotation = SDL_getenv("SDL_VIDEO_WSCONS_ROTATION"); if (rotation != NULL) { if (SDL_strlen(rotation) == 0) { private->shadowFB = 0; private->rotate = WSCONS_ROTATE_NONE; printf("Not rotating, no shadow\n"); } else if (!SDL_strcmp(rotation, "NONE")) { private->shadowFB = 1; private->rotate = WSCONS_ROTATE_NONE; printf("Not rotating, but still using shadow\n"); } else if (!SDL_strcmp(rotation, "CW")) { private->shadowFB = 1; private->rotate = WSCONS_ROTATE_CW; printf("Rotating screen clockwise\n"); } else if (!SDL_strcmp(rotation, "CCW")) { private->shadowFB = 1; private->rotate = WSCONS_ROTATE_CCW; printf("Rotating screen counter clockwise\n"); } else if (!SDL_strcmp(rotation, "UD")) { private->shadowFB = 1; private->rotate = WSCONS_ROTATE_UD; printf("Rotating screen upside down\n"); } else { WSCONS_ReportError("\"%s\" is not a valid value for " "SDL_VIDEO_WSCONS_ROTATION", rotation); return -1; } } switch (private->info.depth) { case 1: case 4: case 8: len = private->physlinebytes * private->info.height; break; case 16: if (private->physlinebytes == private->info.width) { len = private->info.width * private->info.height * sizeof(short); } else { len = private->physlinebytes * private->info.height; } if (private->rotate == WSCONS_ROTATE_NONE || private->rotate == WSCONS_ROTATE_UD) { private->blitFunc = WSCONS_blit16; } else { private->blitFunc = WSCONS_blit16blocked; } break; case 32: if (private->physlinebytes == private->info.width) { len = private->info.width * private->info.height * sizeof(int); } else { len = private->physlinebytes * private->info.height; } break; default: WSCONS_ReportError("unsupported depth %d", private->info.depth); return -1; } if (private->shadowFB && private->blitFunc == NULL) { WSCONS_ReportError("Using software buffer, but no blitter function is " "available for this %d bpp.", private->info.depth); return -1; } if (ioctl(private->fd, WSDISPLAYIO_SMODE, &wsmode) == -1) { WSCONS_ReportError("ioctl SMODE"); return -1; } pagemask = getpagesize() - 1; mapsize = ((int)len + pagemask) & ~pagemask; private->physmem = (Uint8 *)mmap(NULL, mapsize, PROT_READ | PROT_WRITE, MAP_SHARED, private->fd, (off_t)0); if (private->physmem == (Uint8 *)MAP_FAILED) { private->physmem = NULL; WSCONS_ReportError("mmap: %s", strerror(errno)); return -1; } private->fbmem_len = len; if (private->rotate == WSCONS_ROTATE_CW || private->rotate == WSCONS_ROTATE_CCW) { width = private->info.height; height = private->info.width; } else { width = private->info.width; height = private->info.height; } this->info.current_w = width; this->info.current_h = height; if (private->shadowFB) { private->shadowmem = (Uint8 *)SDL_malloc(len); if (private->shadowmem == NULL) { WSCONS_ReportError("No memory for shadow"); return -1; } private->fbstart = private->shadowmem; private->fblinebytes = width * ((private->info.depth + 7) / 8); } else { private->fbstart = private->physmem; private->fblinebytes = private->physlinebytes; } private->SDL_modelist[0] = (SDL_Rect *)SDL_malloc(sizeof(SDL_Rect)); private->SDL_modelist[0]->w = width; private->SDL_modelist[0]->h = height; vformat->BitsPerPixel = private->info.depth; vformat->BytesPerPixel = private->info.depth / 8; if (WSCONS_InitKeyboard(this) == -1) { return -1; } return 0; } SDL_Rect **WSCONS_ListModes(_THIS, SDL_PixelFormat *format, Uint32 flags) { if (format->BitsPerPixel == private->info.depth) { return private->SDL_modelist; } else { return NULL; } } SDL_Surface *WSCONS_SetVideoMode(_THIS, SDL_Surface *current, int width, int height, int bpp, Uint32 flags) { if (width != private->SDL_modelist[0]->w || height != private->SDL_modelist[0]->h) { WSCONS_ReportError("Requested video mode %dx%d not supported.", width, height); return NULL; } if (bpp != private->info.depth) { WSCONS_ReportError("Requested video depth %d bpp not supported.", bpp); return NULL; } if (!SDL_ReallocFormat(current, bpp, private->redMask, private->greenMask, private->blueMask, 0)) { WSCONS_ReportError("Couldn't allocate new pixel format"); return NULL; } current->flags &= SDL_FULLSCREEN; if (private->shadowFB) { current->flags |= SDL_SWSURFACE; } else { current->flags |= SDL_HWSURFACE; } current->w = width; current->h = height; current->pitch = private->fblinebytes; current->pixels = private->fbstart; SDL_memset(private->fbstart, 0, private->fbmem_len); return current; } static int WSCONS_AllocHWSurface(_THIS, SDL_Surface *surface) { return -1; } static void WSCONS_FreeHWSurface(_THIS, SDL_Surface *surface) { } static int WSCONS_LockHWSurface(_THIS, SDL_Surface *surface) { return 0; } static void WSCONS_UnlockHWSurface(_THIS, SDL_Surface *surface) { } static void WSCONS_blit16(Uint8 *byte_src_pos, int srcRightDelta, int srcDownDelta, Uint8 *byte_dst_pos, int dst_linebytes, int width, int height) { int w; Uint16 *src_pos = (Uint16 *)byte_src_pos; Uint16 *dst_pos = (Uint16 *)byte_dst_pos; while (height) { Uint16 *src = src_pos; Uint16 *dst = dst_pos; for (w = width; w != 0; w--) { *dst = *src; src += srcRightDelta; dst++; } dst_pos = (Uint16 *)((Uint8 *)dst_pos + dst_linebytes); src_pos += srcDownDelta; height--; } } #define BLOCKSIZE_W 32 #define BLOCKSIZE_H 32 static void WSCONS_blit16blocked(Uint8 *byte_src_pos, int srcRightDelta, int srcDownDelta, Uint8 *byte_dst_pos, int dst_linebytes, int width, int height) { int w; Uint16 *src_pos = (Uint16 *)byte_src_pos; Uint16 *dst_pos = (Uint16 *)byte_dst_pos; while (height > 0) { Uint16 *src = src_pos; Uint16 *dst = dst_pos; for (w = width; w > 0; w -= BLOCKSIZE_W) { WSCONS_blit16((Uint8 *)src, srcRightDelta, srcDownDelta, (Uint8 *)dst, dst_linebytes, min(w, BLOCKSIZE_W), min(height, BLOCKSIZE_H)); src += srcRightDelta * BLOCKSIZE_W; dst += BLOCKSIZE_W; } dst_pos = (Uint16 *)((Uint8 *)dst_pos + dst_linebytes * BLOCKSIZE_H); src_pos += srcDownDelta * BLOCKSIZE_H; height -= BLOCKSIZE_H; } } static void WSCONS_UpdateRects(_THIS, int numrects, SDL_Rect *rects) { int width = private->SDL_modelist[0]->w; int height = private->SDL_modelist[0]->h; int bytesPerPixel = (private->info.depth + 7) / 8; int i; if (!private->shadowFB) { return; } if (private->info.depth != 16) { WSCONS_ReportError("Shadow copy only implemented for 16 bpp"); return; } for (i = 0; i < numrects; i++) { int x1, y1, x2, y2; int scr_x1, scr_y1, scr_x2, scr_y2; int sha_x1, sha_y1; int shadowRightDelta; /* Address change when moving right in dest */ int shadowDownDelta; /* Address change when moving down in dest */ Uint8 *src_start; Uint8 *dst_start; x1 = rects[i].x; y1 = rects[i].y; x2 = x1 + rects[i].w; y2 = y1 + rects[i].h; if (x1 < 0) { x1 = 0; } else if (x1 > width) { x1 = width; } if (x2 < 0) { x2 = 0; } else if (x2 > width) { x2 = width; } if (y1 < 0) { y1 = 0; } else if (y1 > height) { y1 = height; } if (y2 < 0) { y2 = 0; } else if (y2 > height) { y2 = height; } if (x2 <= x1 || y2 <= y1) { continue; } switch (private->rotate) { case WSCONS_ROTATE_NONE: sha_x1 = scr_x1 = x1; sha_y1 = scr_y1 = y1; scr_x2 = x2; scr_y2 = y2; shadowRightDelta = 1; shadowDownDelta = width; break; case WSCONS_ROTATE_CCW: scr_x1 = y1; scr_y1 = width - x2; scr_x2 = y2; scr_y2 = width - x1; sha_x1 = x2 - 1; sha_y1 = y1; shadowRightDelta = width; shadowDownDelta = -1; break; case WSCONS_ROTATE_UD: scr_x1 = width - x2; scr_y1 = height - y2; scr_x2 = width - x1; scr_y2 = height - y1; sha_x1 = x2 - 1; sha_y1 = y2 - 1; shadowRightDelta = -1; shadowDownDelta = -width; break; case WSCONS_ROTATE_CW: scr_x1 = height - y2; scr_y1 = x1; scr_x2 = height - y1; scr_y2 = x2; sha_x1 = x1; sha_y1 = y2 - 1; shadowRightDelta = -width; shadowDownDelta = 1; break; default: WSCONS_ReportError("Unknown rotation"); return; } src_start = private->shadowmem + (sha_y1 * width + sha_x1) * bytesPerPixel; dst_start = private->physmem + scr_y1 * private->physlinebytes + scr_x1 * bytesPerPixel; private->blitFunc(src_start, shadowRightDelta, shadowDownDelta, dst_start, private->physlinebytes, scr_x2 - scr_x1, scr_y2 - scr_y1); } } int WSCONS_SetColors(_THIS, int firstcolor, int ncolors, SDL_Color *colors) { return 0; } /* * Note: If we are terminated, this could be called in the middle of * another SDL video routine -- notably UpdateRects. */ void WSCONS_VideoQuit(_THIS) { int mode = WSDISPLAYIO_MODE_EMUL; if (private->shadowmem != NULL) { SDL_free(private->shadowmem); private->shadowmem = NULL; } private->fbstart = NULL; if (this->screen != NULL) { this->screen->pixels = NULL; } if (private->SDL_modelist[0] != NULL) { SDL_free(private->SDL_modelist[0]); private->SDL_modelist[0] = NULL; } if (ioctl(private->fd, WSDISPLAYIO_SMODE, &mode) == -1) { WSCONS_ReportError("ioctl SMODE"); } WSCONS_ReleaseKeyboard(this); if (private->fd != -1) { close(private->fd); private->fd = -1; } }