view src/video/vgl/SDL_vglevents.c @ 1585:980d2a0dc2a3

Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents d910939febfa
children 782fd950bd46 c121d94672cb a1b03ba2fcd0
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/* Handle the event stream, converting X11 events into SDL events */

#include <stdio.h>

#include <sys/fbio.h>
#include <sys/consio.h>
#include <sys/kbio.h>
#include <vgl.h>

#include "SDL.h"
#include "SDL_thread.h"
#include "../../events/SDL_sysevents.h"
#include "../../events/SDL_events_c.h"
#include "SDL_vglvideo.h"
#include "SDL_vglevents_c.h"

/* The translation tables from a console scancode to a SDL keysym */
/* FIXME: Free the keymap when we shut down the video mode */
static keymap_t *vga_keymap = NULL;
static SDLKey keymap[128];
static SDL_keysym *TranslateKey(int scancode, SDL_keysym *keysym);

static int posted = 0;
static int oldx = -1;
static int oldy = -1;
static struct mouse_info mouseinfo;

/* Ugh, we have to duplicate the kernel's keysym mapping code...
   Oh, it's not so bad. :-)

   FIXME: Add keyboard LED handling code
 */
int VGL_initkeymaps(int fd)
{
	vga_keymap = SDL_malloc(sizeof(keymap_t));
	if ( ! vga_keymap ) {
		SDL_OutOfMemory();
		return(-1);
	}
	if (ioctl(fd, GIO_KEYMAP, vga_keymap) == -1) {
		SDL_free(vga_keymap);
		vga_keymap = NULL;
		SDL_SetError("Unable to get keyboard map");
		return(-1);
	}
	return(0);
}

static void handle_keyboard(_THIS)
{
	SDL_keysym keysym;
	int c, pressed, scancode;

	while ((c = VGLKeyboardGetCh()) != 0) {
		scancode = c & 0x7F;
                if (c & 0x80) {
                        pressed = SDL_RELEASED;
                } else {
                        pressed = SDL_PRESSED;
                }

		posted += SDL_PrivateKeyboard(pressed,
				 TranslateKey(scancode, &keysym));
	}
}

int VGL_initmouse(int fd)
{
	mouseinfo.operation = MOUSE_GETINFO;
	if (ioctl(fd, CONS_MOUSECTL, &mouseinfo) != 0)
		return -1;

	return 0;
}

static void handle_mouse(_THIS)
{
	char buttons;
	int x, y;
	int button_state, state_changed, state;
	int i;

	ioctl(0, CONS_MOUSECTL, &mouseinfo);
	x = mouseinfo.u.data.x;
	y = mouseinfo.u.data.y;
	buttons = mouseinfo.u.data.buttons;

	if ((x != oldx) || (y != oldy)) {
		posted += SDL_PrivateMouseMotion(0, 0, x, y);
		oldx = x;
		oldy = y;
	}

	/* See what's changed */
	button_state = SDL_GetMouseState(NULL, NULL);
	state_changed = button_state ^ buttons;
	for (i = 0; i < 8; i++) {
		if (state_changed & (1<<i)) {
			if (buttons & (1<<i)) {
				state = SDL_PRESSED;
			} else {
				state = SDL_RELEASED;
			}
			posted += SDL_PrivateMouseButton(state, i + 1, 0, 0);
		}
	}
}
	

void VGL_PumpEvents(_THIS)
{
	do {
		posted = 0;
		handle_keyboard(this);
		handle_mouse(this);
	} while (posted != 0);
}

void VGL_InitOSKeymap(_THIS)
{
	int i;

	/* Initialize the BeOS key translation table */
	for ( i=0; i<SDL_arraysize(keymap); ++i )
		keymap[i] = SDLK_UNKNOWN;

	keymap[SCANCODE_ESCAPE] = SDLK_ESCAPE;
	keymap[SCANCODE_1] = SDLK_1;
	keymap[SCANCODE_2] = SDLK_2;
	keymap[SCANCODE_3] = SDLK_3;
	keymap[SCANCODE_4] = SDLK_4;
	keymap[SCANCODE_5] = SDLK_5;
	keymap[SCANCODE_6] = SDLK_6;
	keymap[SCANCODE_7] = SDLK_7;
	keymap[SCANCODE_8] = SDLK_8;
	keymap[SCANCODE_9] = SDLK_9;
	keymap[SCANCODE_0] = SDLK_0;
	keymap[SCANCODE_MINUS] = SDLK_MINUS;
	keymap[SCANCODE_EQUAL] = SDLK_EQUALS;
	keymap[SCANCODE_BACKSPACE] = SDLK_BACKSPACE;
	keymap[SCANCODE_TAB] = SDLK_TAB;
	keymap[SCANCODE_Q] = SDLK_q;
	keymap[SCANCODE_W] = SDLK_w;
	keymap[SCANCODE_E] = SDLK_e;
	keymap[SCANCODE_R] = SDLK_r;
	keymap[SCANCODE_T] = SDLK_t;
	keymap[SCANCODE_Y] = SDLK_y;
	keymap[SCANCODE_U] = SDLK_u;
	keymap[SCANCODE_I] = SDLK_i;
	keymap[SCANCODE_O] = SDLK_o;
	keymap[SCANCODE_P] = SDLK_p;
	keymap[SCANCODE_BRACKET_LEFT] = SDLK_LEFTBRACKET;
	keymap[SCANCODE_BRACKET_RIGHT] = SDLK_RIGHTBRACKET;
	keymap[SCANCODE_ENTER] = SDLK_RETURN;
	keymap[SCANCODE_LEFTCONTROL] = SDLK_LCTRL;
	keymap[SCANCODE_A] = SDLK_a;
	keymap[SCANCODE_S] = SDLK_s;
	keymap[SCANCODE_D] = SDLK_d;
	keymap[SCANCODE_F] = SDLK_f;
	keymap[SCANCODE_G] = SDLK_g;
	keymap[SCANCODE_H] = SDLK_h;
	keymap[SCANCODE_J] = SDLK_j;
	keymap[SCANCODE_K] = SDLK_k;
	keymap[SCANCODE_L] = SDLK_l;
	keymap[SCANCODE_SEMICOLON] = SDLK_SEMICOLON;
	keymap[SCANCODE_APOSTROPHE] = SDLK_QUOTE;
	keymap[SCANCODE_GRAVE] = SDLK_BACKQUOTE;
	keymap[SCANCODE_LEFTSHIFT] = SDLK_LSHIFT;
	keymap[SCANCODE_BACKSLASH] = SDLK_BACKSLASH;
	keymap[SCANCODE_Z] = SDLK_z;
	keymap[SCANCODE_X] = SDLK_x;
	keymap[SCANCODE_C] = SDLK_c;
	keymap[SCANCODE_V] = SDLK_v;
	keymap[SCANCODE_B] = SDLK_b;
	keymap[SCANCODE_N] = SDLK_n;
	keymap[SCANCODE_M] = SDLK_m;
	keymap[SCANCODE_COMMA] = SDLK_COMMA;
	keymap[SCANCODE_PERIOD] = SDLK_PERIOD;
	keymap[SCANCODE_SLASH] = SDLK_SLASH;
	keymap[SCANCODE_RIGHTSHIFT] = SDLK_RSHIFT;
	keymap[SCANCODE_KEYPADMULTIPLY] = SDLK_KP_MULTIPLY;
	keymap[SCANCODE_LEFTALT] = SDLK_LALT;
	keymap[SCANCODE_SPACE] = SDLK_SPACE;
	keymap[SCANCODE_CAPSLOCK] = SDLK_CAPSLOCK;
	keymap[SCANCODE_F1] = SDLK_F1;
	keymap[SCANCODE_F2] = SDLK_F2;
	keymap[SCANCODE_F3] = SDLK_F3;
	keymap[SCANCODE_F4] = SDLK_F4;
	keymap[SCANCODE_F5] = SDLK_F5;
	keymap[SCANCODE_F6] = SDLK_F6;
	keymap[SCANCODE_F7] = SDLK_F7;
	keymap[SCANCODE_F8] = SDLK_F8;
	keymap[SCANCODE_F9] = SDLK_F9;
	keymap[SCANCODE_F10] = SDLK_F10;
	keymap[SCANCODE_NUMLOCK] = SDLK_NUMLOCK;
	keymap[SCANCODE_SCROLLLOCK] = SDLK_SCROLLOCK;
	keymap[SCANCODE_KEYPAD7] = SDLK_KP7;
	keymap[SCANCODE_CURSORUPLEFT] = SDLK_KP7;
	keymap[SCANCODE_KEYPAD8] = SDLK_KP8;
	keymap[SCANCODE_CURSORUP] = SDLK_KP8;
	keymap[SCANCODE_KEYPAD9] = SDLK_KP9;
	keymap[SCANCODE_CURSORUPRIGHT] = SDLK_KP9;
	keymap[SCANCODE_KEYPADMINUS] = SDLK_KP_MINUS;
	keymap[SCANCODE_KEYPAD4] = SDLK_KP4;
	keymap[SCANCODE_CURSORLEFT] = SDLK_KP4;
	keymap[SCANCODE_KEYPAD5] = SDLK_KP5;
	keymap[SCANCODE_KEYPAD6] = SDLK_KP6;
	keymap[SCANCODE_CURSORRIGHT] = SDLK_KP6;
	keymap[SCANCODE_KEYPADPLUS] = SDLK_KP_PLUS;
	keymap[SCANCODE_KEYPAD1] = SDLK_KP1;
	keymap[SCANCODE_CURSORDOWNLEFT] = SDLK_KP1;
	keymap[SCANCODE_KEYPAD2] = SDLK_KP2;
	keymap[SCANCODE_CURSORDOWN] = SDLK_KP2;
	keymap[SCANCODE_KEYPAD3] = SDLK_KP3;
	keymap[SCANCODE_CURSORDOWNRIGHT] = SDLK_KP3;
	keymap[SCANCODE_KEYPAD0] = SDLK_KP0;
	keymap[SCANCODE_KEYPADPERIOD] = SDLK_KP_PERIOD;
	keymap[SCANCODE_LESS] = SDLK_LESS;
	keymap[SCANCODE_F11] = SDLK_F11;
	keymap[SCANCODE_F12] = SDLK_F12;
	keymap[SCANCODE_KEYPADENTER] = SDLK_KP_ENTER;
	keymap[SCANCODE_RIGHTCONTROL] = SDLK_RCTRL;
	keymap[SCANCODE_CONTROL] = SDLK_RCTRL;
	keymap[SCANCODE_KEYPADDIVIDE] = SDLK_KP_DIVIDE;
	keymap[SCANCODE_PRINTSCREEN] = SDLK_PRINT;
	keymap[SCANCODE_RIGHTALT] = SDLK_RALT;
	keymap[SCANCODE_BREAK] = SDLK_BREAK;
	keymap[SCANCODE_BREAK_ALTERNATIVE] = SDLK_UNKNOWN;
	keymap[SCANCODE_HOME] = SDLK_HOME;
	keymap[SCANCODE_CURSORBLOCKUP] = SDLK_UP;
	keymap[SCANCODE_PAGEUP] = SDLK_PAGEUP;
	keymap[SCANCODE_CURSORBLOCKLEFT] = SDLK_LEFT;
	keymap[SCANCODE_CURSORBLOCKRIGHT] = SDLK_RIGHT;
	keymap[SCANCODE_END] = SDLK_END;
	keymap[SCANCODE_CURSORBLOCKDOWN] = SDLK_DOWN;
	keymap[SCANCODE_PAGEDOWN] = SDLK_PAGEDOWN;
	keymap[SCANCODE_INSERT] = SDLK_INSERT;
	keymap[SCANCODE_REMOVE] = SDLK_DELETE;
	keymap[119] = SDLK_PAUSE;
	keymap[SCANCODE_RIGHTWIN] = SDLK_RSUPER;
	keymap[SCANCODE_LEFTWIN] = SDLK_LSUPER;
	keymap[127] = SDLK_MENU;
}

static SDL_keysym *TranslateKey(int scancode, SDL_keysym *keysym)
{
	/* Set the keysym information */
	keysym->scancode = scancode;
	keysym->sym = keymap[scancode];
	keysym->mod = KMOD_NONE;

	/* If UNICODE is on, get the UNICODE value for the key */
	keysym->unicode = 0;
	if ( SDL_TranslateUNICODE && vga_keymap ) {
		int map;
		SDLMod modstate;

		modstate = SDL_GetModState();
		map = 0;
		if ( modstate & KMOD_SHIFT ) {
			map += 1;
		}
		if ( modstate & KMOD_CTRL ) {
			map += 2;
		}
		if ( modstate & KMOD_ALT ) {
			map += 4;
		}
		if ( !(vga_keymap->key[scancode].spcl & (0x80 >> map)) ) {
			keysym->unicode = vga_keymap->key[scancode].map[map];
		}

	}
	return(keysym);
}