view src/video/svga/SDL_svgavideo.c @ 1585:980d2a0dc2a3

Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents 011b633fa0c9
children 782fd950bd46 c121d94672cb a1b03ba2fcd0
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/* SVGAlib based SDL video driver implementation.
*/

#include <unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <fcntl.h>

#if defined(__LINUX__)
#include <linux/vt.h>
#elif defined(__FREEBSD__)
#include <sys/consio.h>
#else
#error You must choose your operating system here
#endif
#include <vga.h>
#include <vgamouse.h>
#include <vgakeyboard.h>

#include "SDL_video.h"
#include "SDL_mouse.h"
#include "../SDL_sysvideo.h"
#include "../SDL_pixels_c.h"
#include "../../events/SDL_events_c.h"
#include "SDL_svgavideo.h"
#include "SDL_svgaevents_c.h"
#include "SDL_svgamouse_c.h"

/* Initialization/Query functions */
static int SVGA_VideoInit(_THIS, SDL_PixelFormat *vformat);
static SDL_Rect **SVGA_ListModes(_THIS, SDL_PixelFormat *format, Uint32 flags);
static SDL_Surface *SVGA_SetVideoMode(_THIS, SDL_Surface *current, int width, int height, int bpp, Uint32 flags);
static int SVGA_SetColors(_THIS, int firstcolor, int ncolors,
			  SDL_Color *colors);
static void SVGA_VideoQuit(_THIS);

/* Hardware surface functions */
static int SVGA_AllocHWSurface(_THIS, SDL_Surface *surface);
static int SVGA_LockHWSurface(_THIS, SDL_Surface *surface);
static int SVGA_FlipHWSurface(_THIS, SDL_Surface *surface);
static void SVGA_UnlockHWSurface(_THIS, SDL_Surface *surface);
static void SVGA_FreeHWSurface(_THIS, SDL_Surface *surface);

/* SVGAlib driver bootstrap functions */

static int SVGA_Available(void)
{
	/* Check to see if we are root and stdin is a virtual console */
	int console;
	
	/* SVGALib 1.9.x+ doesn't require root (via /dev/svga) */
	int svgalib2 = -1;

	/* See if we are connected to a virtual terminal */
	console = STDIN_FILENO;
#if 0 /* This is no longer needed, SVGAlib can switch consoles for us */
	if ( console >= 0 ) {
		struct stat sb;
		struct vt_mode dummy;

		if ( (fstat(console, &sb) < 0) ||
		     (ioctl(console, VT_GETMODE, &dummy) < 0) ) {
			console = -1;
		}
	}
#endif /* 0 */

	/* See if SVGAlib 2.0 is available */
	svgalib2 = open("/dev/svga", O_RDONLY);
	if (svgalib2 != -1) {
		close(svgalib2);
	}

	return(((svgalib2 != -1) || (geteuid() == 0)) && (console >= 0));
}

static void SVGA_DeleteDevice(SDL_VideoDevice *device)
{
	SDL_free(device->hidden);
	SDL_free(device);
}

static SDL_VideoDevice *SVGA_CreateDevice(int devindex)
{
	SDL_VideoDevice *device;

	/* Initialize all variables that we clean on shutdown */
	device = (SDL_VideoDevice *)SDL_malloc(sizeof(SDL_VideoDevice));
	if ( device ) {
		SDL_memset(device, 0, (sizeof *device));
		device->hidden = (struct SDL_PrivateVideoData *)
				SDL_malloc((sizeof *device->hidden));
	}
	if ( (device == NULL) || (device->hidden == NULL) ) {
		SDL_OutOfMemory();
		if ( device ) {
			SDL_free(device);
		}
		return(0);
	}
	SDL_memset(device->hidden, 0, (sizeof *device->hidden));

	/* Set the function pointers */
	device->VideoInit = SVGA_VideoInit;
	device->ListModes = SVGA_ListModes;
	device->SetVideoMode = SVGA_SetVideoMode;
	device->SetColors = SVGA_SetColors;
	device->UpdateRects = NULL;
	device->VideoQuit = SVGA_VideoQuit;
	device->AllocHWSurface = SVGA_AllocHWSurface;
	device->CheckHWBlit = NULL;
	device->FillHWRect = NULL;
	device->SetHWColorKey = NULL;
	device->SetHWAlpha = NULL;
	device->LockHWSurface = SVGA_LockHWSurface;
	device->UnlockHWSurface = SVGA_UnlockHWSurface;
	device->FlipHWSurface = SVGA_FlipHWSurface;
	device->FreeHWSurface = SVGA_FreeHWSurface;
	device->SetCaption = NULL;
	device->SetIcon = NULL;
	device->IconifyWindow = NULL;
	device->GrabInput = NULL;
	device->GetWMInfo = NULL;
	device->InitOSKeymap = SVGA_InitOSKeymap;
	device->PumpEvents = SVGA_PumpEvents;

	device->free = SVGA_DeleteDevice;

	return device;
}

VideoBootStrap SVGALIB_bootstrap = {
	"svgalib", "SVGAlib",
	SVGA_Available, SVGA_CreateDevice
};

static int SVGA_AddMode(_THIS, int mode, int actually_add)
{
	int i, j;
	vga_modeinfo *modeinfo;

	modeinfo = vga_getmodeinfo(mode);

	i = modeinfo->bytesperpixel-1;
	if ( i < 0 ) {
		return 0;
	}
	if ( actually_add ) {
		SDL_Rect saved_rect[2];
		int      saved_mode[2];
		int b;

		/* Add the mode, sorted largest to smallest */
		b = 0;
		j = 0;
		while ( (SDL_modelist[i][j]->w > modeinfo->width) ||
			(SDL_modelist[i][j]->h > modeinfo->height) ) {
			++j;
		}
		/* Skip modes that are already in our list */
		if ( (SDL_modelist[i][j]->w == modeinfo->width) &&
		     (SDL_modelist[i][j]->h == modeinfo->height) ) {
			return(0);
		}
		/* Insert the new mode */
		saved_rect[b] = *SDL_modelist[i][j];
		saved_mode[b] = SDL_vgamode[i][j];
		SDL_modelist[i][j]->w = modeinfo->width;
		SDL_modelist[i][j]->h = modeinfo->height;
		SDL_vgamode[i][j] = mode;
		/* Everybody scoot down! */
		if ( saved_rect[b].w && saved_rect[b].h ) {
		    for ( ++j; SDL_modelist[i][j]->w; ++j ) {
			saved_rect[!b] = *SDL_modelist[i][j];
			saved_mode[!b] = SDL_vgamode[i][j];
			*SDL_modelist[i][j] = saved_rect[b];
			SDL_vgamode[i][j] = saved_mode[b];
			b = !b;
		    }
		    *SDL_modelist[i][j] = saved_rect[b];
		    SDL_vgamode[i][j] = saved_mode[b];
		}
	} else {
		++SDL_nummodes[i];
	}
	return(1);
}

static void SVGA_UpdateVideoInfo(_THIS)
{
	vga_modeinfo *modeinfo;

	this->info.wm_available = 0;
	this->info.hw_available = (banked ? 0 : 1);
	modeinfo = vga_getmodeinfo(vga_getcurrentmode());
	this->info.video_mem = modeinfo->memory;
	/* FIXME: Add hardware accelerated blit information */
#ifdef SVGALIB_DEBUG
	printf("Hardware accelerated blit: %savailable\n", modeinfo->haveblit ? "" : "not ");
#endif
}

int SVGA_VideoInit(_THIS, SDL_PixelFormat *vformat)
{
	int keyboard;
	int i, j;
	int mode, total_modes;

	/* Initialize all variables that we clean on shutdown */
	for ( i=0; i<NUM_MODELISTS; ++i ) {
		SDL_nummodes[i] = 0;
		SDL_modelist[i] = NULL;
		SDL_vgamode[i] = NULL;
	}

	/* Initialize the library */
	vga_disabledriverreport();
	if ( vga_init() < 0 ) {
		SDL_SetError("Unable to initialize SVGAlib");
		return(-1);
	}
	vga_setmode(TEXT);

	/* Enable mouse and keyboard support */
	vga_setmousesupport(1);
	keyboard = keyboard_init_return_fd();
	if ( keyboard < 0 ) {
		SDL_SetError("Unable to initialize keyboard");
		return(-1);
	}
	if ( SVGA_initkeymaps(keyboard) < 0 ) {
		return(-1);
	}
	keyboard_seteventhandler(SVGA_keyboardcallback);

	/* Determine the current screen size */
	this->info.current_w = 0;
	this->info.current_h = 0;

	/* Determine the screen depth (use default 8-bit depth) */
	vformat->BitsPerPixel = 8;

	/* Enumerate the available fullscreen modes */
	total_modes = 0;
	for ( mode=vga_lastmodenumber(); mode; --mode ) {
		if ( vga_hasmode(mode) ) {
			if ( SVGA_AddMode(this, mode, 0) ) {
				++total_modes;
			}
		}
	}
	if ( SVGA_AddMode(this, G320x200x256, 0) ) ++total_modes;
	if ( total_modes == 0 ) {
		SDL_SetError("No linear video modes available");
		return(-1);
	}
	for ( i=0; i<NUM_MODELISTS; ++i ) {
		SDL_vgamode[i] = (int *)SDL_malloc(SDL_nummodes[i]*sizeof(int));
		if ( SDL_vgamode[i] == NULL ) {
			SDL_OutOfMemory();
			return(-1);
		}
		SDL_modelist[i] = (SDL_Rect **)
				SDL_malloc((SDL_nummodes[i]+1)*sizeof(SDL_Rect *));
		if ( SDL_modelist[i] == NULL ) {
			SDL_OutOfMemory();
			return(-1);
		}
		for ( j=0; j<SDL_nummodes[i]; ++j ) {
			SDL_modelist[i][j]=(SDL_Rect *)SDL_malloc(sizeof(SDL_Rect));
			if ( SDL_modelist[i][j] == NULL ) {
				SDL_OutOfMemory();
				return(-1);
			}
			SDL_memset(SDL_modelist[i][j], 0, sizeof(SDL_Rect));
		}
		SDL_modelist[i][j] = NULL;
	}
	for ( mode=vga_lastmodenumber(); mode; --mode ) {
		if ( vga_hasmode(mode) ) {
			SVGA_AddMode(this, mode, 1);
		}
	}
	SVGA_AddMode(this, G320x200x256, 1);

	/* Free extra (duplicated) modes */
	for ( i=0; i<NUM_MODELISTS; ++i ) {
		j = 0;
		while ( SDL_modelist[i][j] && SDL_modelist[i][j]->w ) {
			j++;
		}
		while ( SDL_modelist[i][j] ) {
			SDL_free(SDL_modelist[i][j]);
			SDL_modelist[i][j] = NULL;
			j++;
		}
	}

	/* Fill in our hardware acceleration capabilities */
	SVGA_UpdateVideoInfo(this);

	/* We're done! */
	return(0);
}

SDL_Rect **SVGA_ListModes(_THIS, SDL_PixelFormat *format, Uint32 flags)
{
	return(SDL_modelist[((format->BitsPerPixel+7)/8)-1]);
}

/* Various screen update functions available */
static void SVGA_DirectUpdate(_THIS, int numrects, SDL_Rect *rects);
static void SVGA_BankedUpdate(_THIS, int numrects, SDL_Rect *rects);

SDL_Surface *SVGA_SetVideoMode(_THIS, SDL_Surface *current,
				int width, int height, int bpp, Uint32 flags)
{
	int mode;
	int vgamode;
	vga_modeinfo *modeinfo;
	int screenpage_len;

	/* Free old pixels if we were in banked mode */
	if ( banked && current->pixels ) {
		free(current->pixels);
		current->pixels = NULL;
	}

	/* Try to set the requested linear video mode */
	bpp = (bpp+7)/8-1;
	for ( mode=0; SDL_modelist[bpp][mode]; ++mode ) {
		if ( (SDL_modelist[bpp][mode]->w == width) &&
		     (SDL_modelist[bpp][mode]->h == height) ) {
			break;
		}
	}
	if ( SDL_modelist[bpp][mode] == NULL ) {
		SDL_SetError("Couldn't find requested mode in list");
		return(NULL);
	}
	vgamode = SDL_vgamode[bpp][mode];
	vga_setmode(vgamode);
	vga_setpage(0);

	if ( (vga_setlinearaddressing() < 0) && (vgamode != G320x200x256) ) {
		banked = 1;
	} else {
		banked = 0;
	}
    
	modeinfo = vga_getmodeinfo(SDL_vgamode[bpp][mode]);

	/* Update hardware acceleration info */
	SVGA_UpdateVideoInfo(this);

	/* Allocate the new pixel format for the screen */
	bpp = (bpp+1)*8;
	if ( (bpp == 16) && (modeinfo->colors == 32768) ) {
		bpp = 15;
	}
	if ( ! SDL_ReallocFormat(current, bpp, 0, 0, 0, 0) ) {
		return(NULL);
	}

	/* Set up the new mode framebuffer */
	current->flags = SDL_FULLSCREEN;
	if ( !banked ) {
		current->flags |= SDL_HWSURFACE;
	}
	if ( bpp == 8 ) {
		/* FIXME: What about DirectColor? */
		current->flags |= SDL_HWPALETTE;
	}
	current->w = width;
	current->h = height;
	current->pitch = modeinfo->linewidth;
	if ( banked ) {
		current->pixels = SDL_malloc(current->h * current->pitch);
		if ( !current->pixels ) {
			SDL_OutOfMemory();
			return(NULL);
		}
	} else {
		current->pixels = vga_getgraphmem();
	}

	/* set double-buffering */
	if ( (flags & SDL_DOUBLEBUF) && !banked )
	{
	    /* length of one screen page in bytes */
	    screenpage_len=current->h*modeinfo->linewidth;

	    /* if start address should be aligned */
	    if ( modeinfo->linewidth_unit )
	    {
		if ( screenpage_len % modeinfo->linewidth_unit )    
		{
		    screenpage_len += modeinfo->linewidth_unit - ( screenpage_len % modeinfo->linewidth_unit );
		}
	    }

	    /* if we heve enough videomemory =  ak je dost videopamete  */
	    if ( modeinfo->memory > ( screenpage_len * 2 / 1024 ) )
	    {
		current->flags |= SDL_DOUBLEBUF;
		flip_page = 0;
		flip_offset[0] = 0;
		flip_offset[1] = screenpage_len;
		flip_address[0] = vga_getgraphmem();
		flip_address[1] = flip_address[0]+screenpage_len;
		SVGA_FlipHWSurface(this,current);
	    }
	} 

	/* Set the blit function */
	if ( banked ) {
		this->UpdateRects = SVGA_BankedUpdate;
	} else {
		this->UpdateRects = SVGA_DirectUpdate;
	}

	/* Set up the mouse handler again (buggy SVGAlib 1.40) */
	mouse_seteventhandler(SVGA_mousecallback);

	/* We're done */
	return(current);
}

/* We don't actually allow hardware surfaces other than the main one */
static int SVGA_AllocHWSurface(_THIS, SDL_Surface *surface)
{
	return(-1);
}
static void SVGA_FreeHWSurface(_THIS, SDL_Surface *surface)
{
	return;
}

/* We need to wait for vertical retrace on page flipped displays */
static int SVGA_LockHWSurface(_THIS, SDL_Surface *surface)
{
	/* The waiting is done in SVGA_FlipHWSurface() */
	return(0);
}
static void SVGA_UnlockHWSurface(_THIS, SDL_Surface *surface)
{
	return;
}

static int SVGA_FlipHWSurface(_THIS, SDL_Surface *surface)
{
	if ( !banked ) {
		vga_setdisplaystart(flip_offset[flip_page]);
		flip_page=!flip_page;
		surface->pixels=flip_address[flip_page];
		vga_waitretrace();
	}
	return(0);
}

static void SVGA_DirectUpdate(_THIS, int numrects, SDL_Rect *rects)
{
	return;
}

static void SVGA_BankedUpdate(_THIS, int numrects, SDL_Rect *rects)
{
	int i, j;
	SDL_Rect *rect;
	int page, vp;
	int x, y, w, h;
	unsigned char *src;
	unsigned char *dst;
	int bpp = this->screen->format->BytesPerPixel;
	int pitch = this->screen->pitch;

	dst = vga_getgraphmem();
	for ( i=0; i < numrects; ++i ) {
		rect = &rects[i];
		x = rect->x;
		y = rect->y;
		w = rect->w * bpp;
		h = rect->h;

		vp = y * pitch + x * bpp;
		src = (unsigned char *)this->screen->pixels + vp;
		page = vp >> 16;
		vp &= 0xffff;
		vga_setpage(page);
		for (j = 0; j < h; j++) {
			if (vp + w > 0x10000) {
				if (vp >= 0x10000) {
					page++;
					vga_setpage(page);
					vp &= 0xffff;
				} else {
					SDL_memcpy(dst + vp, src, 0x10000 - vp);
					page++;
					vga_setpage(page);
					SDL_memcpy(dst, src + 0x10000 - vp,
						 (vp + w) & 0xffff);
					vp = (vp + pitch) & 0xffff;
					src += pitch;
					continue;
				}
			}
			SDL_memcpy(dst + vp, src, w);
			src += pitch;
			vp += pitch;
		}
	}
}

int SVGA_SetColors(_THIS, int firstcolor, int ncolors, SDL_Color *colors)
{
        int i;

	for(i = 0; i < ncolors; i++) {
	        vga_setpalette(firstcolor + i,
			       colors[i].r>>2,
			       colors[i].g>>2,
			       colors[i].b>>2);
	}
	return(1);
}

/* Note:  If we are terminated, this could be called in the middle of
   another SDL video routine -- notably UpdateRects.
*/
void SVGA_VideoQuit(_THIS)
{
	int i, j;

	/* Reset the console video mode */
	if ( this->screen && (this->screen->w && this->screen->h) ) {
		vga_setmode(TEXT);
	}
	keyboard_close();

	/* Free video mode lists */
	for ( i=0; i<NUM_MODELISTS; ++i ) {
		if ( SDL_modelist[i] != NULL ) {
			for ( j=0; SDL_modelist[i][j]; ++j )
				SDL_free(SDL_modelist[i][j]);
			SDL_free(SDL_modelist[i]);
			SDL_modelist[i] = NULL;
		}
		if ( SDL_vgamode[i] != NULL ) {
			SDL_free(SDL_vgamode[i]);
			SDL_vgamode[i] = NULL;
		}
	}
	if ( this->screen ) {
		if ( banked && this->screen->pixels ) {
			SDL_free(this->screen->pixels);
		}
		this->screen->pixels = NULL;
	}
}