view src/video/fbcon/3dfx_regs.h @ 1585:980d2a0dc2a3

Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents d910939febfa
children 782fd950bd46 a1b03ba2fcd0
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#ifndef _3DFX_REGS_H
#define _3DFX_REGS_H

/* This information comes from the public 3Dfx specs for the Voodoo 3000 */

/* mapped_io register offsets */
#define TDFX_STATUS	0x00

#define INTCTRL		(0x00100000 + 0x04)
#define CLIP0MIN	(0x00100000 + 0x08)
#define CLIP0MAX	(0x00100000 + 0x0c)
#define DSTBASE		(0x00100000 + 0x10)
#define DSTFORMAT	(0x00100000 + 0x14)
#define SRCCOLORKEYMIN	(0x00100000 + 0x18)
#define SRCCOLORKEYMAX	(0x00100000 + 0x1c)
#define DSTCOLORKEYMIN	(0x00100000 + 0x20)
#define DSTCOLORKEYMAX	(0x00100000 + 0x24)
#define BRESERROR0	(0x00100000 + 0x28)
#define BRESERROR1	(0x00100000 + 0x2c)
#define ROP_2D		(0x00100000 + 0x30)
#define SRCBASE		(0x00100000 + 0x34)
#define COMMANDEXTRA_2D	(0x00100000 + 0x38)
#define PATTERN0	(0x00100000 + 0x44)
#define PATTERN1	(0x00100000 + 0x48)
#define CLIP1MIN	(0x00100000 + 0x4c)
#define CLIP1MAX	(0x00100000 + 0x50)
#define SRCFORMAT	(0x00100000 + 0x54)
#define SRCSIZE		(0x00100000 + 0x58)
#define SRCXY		(0x00100000 + 0x5c)
#define COLORBACK	(0x00100000 + 0x60)
#define COLORFORE	(0x00100000 + 0x64)
#define DSTSIZE		(0x00100000 + 0x68)
#define DSTXY		(0x00100000 + 0x6c)
#define COMMAND_2D	(0x00100000 + 0x70)
#define LAUNCH_2D	(0x00100000 + 0x80)
#define PATTERNBASE	(0x00100000 + 0x100)

#define COMMAND_3D	(0x00200000 + 0x120)

/* register bitfields (not all, only as needed) */

#define BIT(x) (1UL << (x))

#define COMMAND_2D_BITBLT		0x01
#define COMMAND_2D_FILLRECT		0x05
#define COMMAND_2D_LINE			0x06
#define COMMAND_2D_POLYGON_FILL		0x08
#define COMMAND_2D_INITIATE		BIT(8)
#define COMMAND_2D_REVERSELINE		BIT(9)
#define COMMAND_2D_STIPPLELINE		BIT(12)
#define COMMAND_2D_MONOCHROME_PATT	BIT(13)
#define COMMAND_2D_MONOCHROME_TRANSP    BIT(16)

#define COMMAND_3D_NOP			0x00

#define STATUS_RETRACE			BIT(6)
#define STATUS_BUSY			BIT(9)

#endif /* _3DFX_REGS_H */