view src/timer/amigaos/SDL_systimer.c @ 1585:980d2a0dc2a3

Date: Tue, 4 Mar 2003 15:05:31 -0800 From: "Jim" Subject: [SDL] Frame Buffer patches... Okay I'm new at patch generation - so please tell me if there's a better way I could have done this. Attached are two patch files generated with 'cvs diff -u' SDL-fb-open-lock.patch applies to SDL_fbvideo.c Modifies the open loop to check /dev/fb/0 found on devfs... Modifies the lock code to return failure if the current virtual terminal is not the one opened for frame buffer writing... Lock would hang forever if switched away (ctrl-alt-F1) ... SDL-fb-mousedrv-screensave.patch applies to SDL_fbevents.c Switches default mouse mode based on SDL_MOUSEDRV - currently only accepts PS2 - otherwise default is MS Mouse. When the screen is switched - exisiting code (wrapped in ifdef SAVE_SCREEN_COTENTS) would save the wrong bit of the screen.... ( I run frame buffer 1600x1200, the size I requested was 800x600 - the save would save the top 800 lines (non biased) and restore them... Adding screen->offset fixed that ) However, if that option is not set, then a call to SDL_UpdateRect (full screen) is made. (which may have had it's contents changed since the screen is not entirely locked because of lock-failure patch) Jim [patches slightly tweaked for SDL 1.2.10]
author Sam Lantinga <slouken@libsdl.org>
date Wed, 22 Mar 2006 07:48:22 +0000
parents d910939febfa
children 92947e3a18db
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#include <stdio.h>
#include <time.h>
#include <signal.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <exec/types.h>
#ifdef __SASC
#include <proto/dos.h>
#include <clib/graphics_protos.h>
#include <pragmas/graphics.h>
#include <clib/exec_protos.h>
#include <pragmas/exec.h>
#elif defined(STORMC4_WOS)
#include <proto/dos.h>
#include <proto/exec.h>
#include <proto/graphics.h>
#else
#include <inline/dos.h>
#include <inline/exec.h>
#include <inline/graphics.h>
#endif
#include "mydebug.h"

extern struct DosLibrary *DOSBase;
extern struct ExecBase *SysBase;
static struct GfxBase *GfxBase;

#include "SDL_timer.h"
#include "../SDL_timer_c.h"

/* The first ticks value of the application */

#if !defined(__PPC__) || defined(STORMC4_WOS) || defined(MORPHOS)
static clock_t start;

void SDL_StartTicks(void)
{
	/* Set first ticks value */
	start=clock();
}

Uint32 SDL_GetTicks (void)
{
	clock_t ticks;

	ticks=clock()-start;

#ifdef __SASC
// CLOCKS_PER_SEC == 1000 !

	return(ticks);
#else
// CLOCKS_PER_SEC != 1000 !

	return ticks*(1000/CLOCKS_PER_SEC);
#endif
}

void SDL_Delay (Uint32 ms)
{
// Do a busy wait if time is less than 50ms

	if(ms<50)
	{
		clock_t to_wait=clock();

#ifndef __SASC
		ms*=(CLOCKS_PER_SEC/1000);
#endif
		to_wait+=ms;

		while(clock()<to_wait);
	}
	else
	{
		Delay(ms/20);
	}
}

#else

ULONG MY_CLOCKS_PER_SEC;

void PPC_TimerInit(void);
APTR MyTimer;

ULONG start[2];

void SDL_StartTicks(void)
{
	/* Set first ticks value */
	if(!MyTimer)
		PPC_TimerInit();

	PPCGetTimerObject(MyTimer,PPCTIMERTAG_CURRENTTICKS,start);
	start[1]>>=10;
	start[1]|=((result[0]&0x3ff)<<22);
	start[0]>>=10;
}

Uint32 SDL_GetTicks (void)
{
	ULONG result[2];
	PPCGetTimerObject(MyTimer,PPCTIMERTAG_CURRENTTICKS,result);

//	PPCAsr64p(result,10);
// Non va, la emulo:

	result[1]>>=10;
	result[1]|=((result[0]&0x3ff)<<22);

// Non mi interessa piu' result[0]

	return result[1]*1000/MY_CLOCKS_PER_SEC;
}

void SDL_Delay (Uint32 ms)
{
// Do a busy wait if time is less than 50ms

	if(ms<50)
	{
		ULONG to_wait[2],actual[2];
		PPCGetTimerObject(MyTimer,PPCTIMERTAG_CURRENTTICKS,result);
		actual[1]=0;
		to_wait[1]+=ms*1000/MY_CLOCKS_PER_SEC;

		while(actual[1]<to_wait[1])
		{
			PPCGetTimerObject(MyTimer,PPCTIMERTAG_CURRENTTICKS,actual);
		}
	}
	else
	{
		Delay(ms/50);
	}
}

void PPC_TimerInit(void)
{
	struct TagItem tags[]=
		{
			PPCTIMERTAG_CPU,TRUE,
			TAG_DONE,0
		};


	if(MyTimer=PPCCreateTimerObject(tags))
	{
		ULONG result[2];

		PPCGetTimerObject(MyTimer,PPCTIMERTAG_TICKSPERSEC,result);
		D(bug("Timer inizializzato, TPS: %lu - %lu\n",result[0],result[1]));
//		PPCAsr64p(result,10);
		result[1]>>=10;
		result[1]|=((result[0]&0x3ff)<<22);
		result[0]>>=10;

		D(bug("Shiftato TPS: %lu - %lu\n",result[0],result[1]));
		MY_CLOCKS_PER_SEC=result[1];

		PPCGetTimerObject(MyTimer,PPCTIMERTAG_CURRENTTICKS,result);

		D(bug("Current ticks: %lu - %lu\n",result[0],result[1]));
		result[1]>>=10;
		result[1]|=((result[0]&0x3ff)<<22);
		result[0]>>=10;
//		PPCAsr64p(result,10);
		D(bug("Shiftato: %lu - %lu\n",result[0],result[1]));
	}
	else
	{
		D(bug("Errore nell'inizializzazione del timer!\n"));
	}
}

#endif

#include "SDL_thread.h"

/* Data to handle a single periodic alarm */
static int timer_alive = 0;
static SDL_Thread *timer_thread = NULL;

static int RunTimer(void *unused)
{
	D(bug("SYSTimer: Entering RunTimer loop..."));

	if(GfxBase==NULL)
		GfxBase=(struct GfxBase *)OpenLibrary("graphics.library",37);

	while ( timer_alive ) {
		if ( SDL_timer_running ) {
			SDL_ThreadedTimerCheck();
		}
		if(GfxBase)
			WaitTOF();  // Check the timer every fifth of seconds. Was SDL_Delay(1)->BusyWait!
		else
			Delay(1);
	}
	D(bug("SYSTimer: EXITING RunTimer loop..."));
	return(0);
}

/* This is only called if the event thread is not running */
int SDL_SYS_TimerInit(void)
{
	D(bug("Creating thread for the timer (NOITIMER)...\n"));

	timer_alive = 1;
	timer_thread = SDL_CreateThread(RunTimer, NULL);
	if ( timer_thread == NULL )
	{
		D(bug("Creazione del thread fallita...\n"));

		return(-1);
	}
	return(SDL_SetTimerThreaded(1));
}

void SDL_SYS_TimerQuit(void)
{
	timer_alive = 0;
	if ( timer_thread ) {
		SDL_WaitThread(timer_thread, NULL);
		timer_thread = NULL;
	}
}

int SDL_SYS_StartTimer(void)
{
	SDL_SetError("Internal logic error: AmigaOS uses threaded timer");
	return(-1);
}

void SDL_SYS_StopTimer(void)
{
	return;
}