Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian

/**
 * Automated SDL rect test.
 *
 * Written by Edgar Simo "bobbens"
 *
 * Released under Public Domain.
 */




#include "SDL_rect.h"
#include "../SDL_at.h"


/*
 * Prototypes.
 */
static void rect_testIntersectRectAndLine (void);


/**
 * @brief Tests SDL_IntersectRectAndLine()
 */
static void rect_testIntersectRectAndLine (void)
{
    SDL_Rect rect = { 0, 0, 32, 32 };
    int x1, y1;
    int x2, y2;
    SDL_bool clipped;

    SDL_ATbegin( "IntersectRectAndLine" );

    x1 = -10;
    y1 = 0;
    x2 = -10;
    y2 = 31;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( !clipped &&
                   x1 == -10 && y1 == 0 && x2 == -10 && y2 == 31,
        "line outside to the left was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 40;
    y1 = 0;
    x2 = 40;
    y2 = 31;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( !clipped &&
                   x1 == 40 && y1 == 0 && x2 == 40 && y2 == 31,
        "line outside to the right was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 0;
    y1 = -10;
    x2 = 31;
    y2 = -10;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( !clipped &&
                   x1 == 0 && y1 == -10 && x2 == 31 && y2 == -10,
        "line outside above was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 0;
    y1 = 40;
    x2 = 31;
    y2 = 40;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( !clipped &&
                   x1 == 0 && y1 == 40 && x2 == 31 && y2 == 40,
        "line outside below was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 0;
    y1 = 0;
    x2 = 31;
    y2 = 31;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 0 && y1 == 0 && x2 == 31 && y2 == 31,
        "line fully inside rect was clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = -10;
    y1 = 15;
    x2 = 40;
    y2 = 15;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 0 && y1 == 15 && x2 == 31 && y2 == 15,
        "horizontal line rect was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = -32;
    y1 = -32;
    x2 = 63;
    y2 = 63;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 0 && y1 == 0 && x2 == 31 && y2 == 31,
        "diagonal line to lower right was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 63;
    y1 = 63;
    x2 = -32;
    y2 = -32;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 31 && y1 == 31 && x2 == 0 && y2 == 0,
        "diagonal line to upper left was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = 63;
    y1 = -32;
    x2 = -32;
    y2 = 63;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 31 && y1 == 0 && x2 == 0 && y2 == 31,
        "diagonal line to lower left was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    x1 = -32;
    y1 = 63;
    x2 = 63;
    y2 = -32;
    clipped = SDL_IntersectRectAndLine(&rect, &x1, &y1, &x2, &y2);
    SDL_ATvassert( clipped &&
                   x1 == 0 && y1 == 31 && x2 == 31 && y2 == 0,
        "diagonal line to upper right was incorrectly clipped: %d,%d - %d,%d",
        x1, y1, x2, y2);

    SDL_ATend();
}


/**
 * @brief Rect test entrypoint.
 */
#ifdef TEST_STANDALONE
int main( int argc, const char *argv[] )
{
   (void) argc;
   (void) argv;
#else /* TEST_STANDALONE */
int test_rect (void)
{
#endif /* TEST_STANDALONE */

   SDL_ATinit( "Rect" );

   rect_testIntersectRectAndLine();

   return SDL_ATfinish();
}