Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian

These are test programs for the SDL library:

	checkkeys	Watch the key events to check the keyboard
	graywin		Display a gray gradient and center mouse on spacebar
	loopwave	Audio test -- loop playing a WAV file
	testalpha	Display an alpha faded icon -- paint with mouse
	testaudioinfo	Lists audio device capabilities
	testbitmap	Test displaying 1-bit bitmaps
	testblitspeed	Tests performance of SDL's blitters and converters.
	testcdrom	Sample audio CD control program
	testcursor	Tests custom mouse cursor
	testdyngl	Tests dynamically loading OpenGL library
	testerror	Tests multi-threaded error handling
	testfile	Tests RWops layer
	testgamma	Tests video device gamma ramp
	testgl		A very simple example of using OpenGL with SDL
	testgl2		An even simpler example using the SDL 1.3 API
	testhread	Hacked up test of multi-threading
	testiconv	Tests international string conversion
	testjoystick	List joysticks and watch joystick events
	testkeys	List the available keyboard keys
	testloadso	Tests the loadable library layer
	testlock	Hacked up test of multi-threading and locking
	testmultiaudio	Tests using several audio devices
	testoverlay	Tests the software/hardware overlay functionality.
	testoverlay2	Tests the overlay flickering/scaling during playback.
	testpalette	Tests palette color cycling
	testplatform	Tests types, endianness and cpu capabilities
	testsem		Tests SDL's semaphore implementation
	testsprite	Example of fast sprite movement on the screen
	testsprite2	Improved version of testsprite
	testtimer	Test the timer facilities
	testver		Check the version and dynamic loading and endianness
	testvidinfo	Show the pixel format of the display and perfom the benchmark
	testwin		Display a BMP image at various depths
	testwm		Test window manager -- title, icon, events
	testwm2		Improved version of testwm
	threadwin	Test multi-threaded event handling
	torturethread	Simple test for thread creation/destruction