Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian

/* Scancodes for the Linux framebuffer console
   - Taken with thanks from SVGAlib 1.4.0
*/

#define SCANCODE_ESCAPE			1

#define SCANCODE_1			2
#define SCANCODE_2			3
#define SCANCODE_3			4
#define SCANCODE_4			5
#define SCANCODE_5			6
#define SCANCODE_6			7
#define SCANCODE_7			8
#define SCANCODE_8			9
#define SCANCODE_9			10
#define SCANCODE_0			11

#define SCANCODE_MINUS			12
#define SCANCODE_EQUAL			13

#define SCANCODE_BACKSPACE		14
#define SCANCODE_TAB			15

#define SCANCODE_Q			16
#define SCANCODE_W			17
#define SCANCODE_E			18
#define SCANCODE_R			19
#define SCANCODE_T			20
#define SCANCODE_Y			21
#define SCANCODE_U			22
#define SCANCODE_I			23
#define SCANCODE_O			24
#define SCANCODE_P			25
#define SCANCODE_BRACKET_LEFT		26
#define SCANCODE_BRACKET_RIGHT		27

#define SCANCODE_ENTER			28

#define SCANCODE_LEFTCONTROL		29

#define SCANCODE_A			30
#define SCANCODE_S			31
#define SCANCODE_D			32
#define SCANCODE_F			33
#define SCANCODE_G			34
#define SCANCODE_H			35
#define SCANCODE_J			36
#define SCANCODE_K			37
#define SCANCODE_L			38
#define SCANCODE_SEMICOLON		39
#define SCANCODE_APOSTROPHE		40
#define SCANCODE_GRAVE			41

#define SCANCODE_LEFTSHIFT		42
#define SCANCODE_BACKSLASH		43

#define SCANCODE_Z			44
#define SCANCODE_X			45
#define SCANCODE_C			46
#define SCANCODE_V			47
#define SCANCODE_B			48
#define SCANCODE_N			49
#define SCANCODE_M			50
#define SCANCODE_COMMA			51
#define SCANCODE_PERIOD			52
#define SCANCODE_SLASH			53

#define SCANCODE_RIGHTSHIFT		54
#define SCANCODE_KEYPADMULTIPLY		55

#define SCANCODE_LEFTALT		56
#define SCANCODE_SPACE			57
#define SCANCODE_CAPSLOCK		58

#define SCANCODE_F1			59
#define SCANCODE_F2			60
#define SCANCODE_F3			61
#define SCANCODE_F4			62
#define SCANCODE_F5			63
#define SCANCODE_F6			64
#define SCANCODE_F7			65
#define SCANCODE_F8			66
#define SCANCODE_F9			67
#define SCANCODE_F10			68

#define SCANCODE_NUMLOCK		69
#define SCANCODE_SCROLLLOCK		70

#define SCANCODE_KEYPAD7		71
#define SCANCODE_CURSORUPLEFT		71
#define SCANCODE_KEYPAD8		72
#define SCANCODE_CURSORUP		72
#define SCANCODE_KEYPAD9		73
#define SCANCODE_CURSORUPRIGHT		73
#define SCANCODE_KEYPADMINUS		74
#define SCANCODE_KEYPAD4		75
#define SCANCODE_CURSORLEFT		75
#define SCANCODE_KEYPAD5		76
#define SCANCODE_KEYPAD6		77
#define SCANCODE_CURSORRIGHT		77
#define SCANCODE_KEYPADPLUS		78
#define SCANCODE_KEYPAD1		79
#define SCANCODE_CURSORDOWNLEFT		79
#define SCANCODE_KEYPAD2		80
#define SCANCODE_CURSORDOWN		80
#define SCANCODE_KEYPAD3		81
#define SCANCODE_CURSORDOWNRIGHT	81
#define SCANCODE_KEYPAD0		82
#define SCANCODE_KEYPADPERIOD		83

#define SCANCODE_LESS			86

#define SCANCODE_F11			87
#define SCANCODE_F12			88

#define SCANCODE_KEYPADENTER		96
#define SCANCODE_RIGHTCONTROL		97
#define SCANCODE_CONTROL		97
#define SCANCODE_KEYPADDIVIDE		98
#define SCANCODE_PRINTSCREEN		99
#define SCANCODE_RIGHTALT		100
#define SCANCODE_BREAK			101     /* Beware: is 119     */
#define SCANCODE_BREAK_ALTERNATIVE	119     /* on some keyboards! */

#define SCANCODE_HOME			102
#define SCANCODE_CURSORBLOCKUP		103     /* Cursor key block */
#define SCANCODE_PAGEUP			104
#define SCANCODE_CURSORBLOCKLEFT	105     /* Cursor key block */
#define SCANCODE_CURSORBLOCKRIGHT	106     /* Cursor key block */
#define SCANCODE_END			107
#define SCANCODE_CURSORBLOCKDOWN	108     /* Cursor key block */
#define SCANCODE_PAGEDOWN		109
#define SCANCODE_INSERT			110
#define SCANCODE_REMOVE			111

#define SCANCODE_RIGHTWIN		126
#define SCANCODE_LEFTWIN		125
/* vi: set ts=4 sw=4 expandtab: */