Mercurial > sdl-ios-xcode
view src/thread/riscos/SDL_syssem.c @ 4447:947201caa46e
Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware.
The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle.
As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway.
So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do.
I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory.
I expect these changes should work for both Mac and iPhone OS (which includes iPad).
I will update the iPhone Xcode project next.
Finally, FYI, the X11 automated test seems to be failing. Below is my output.
Pending breakpoint 4 - "-[NSException raise]" resolved
Platform : All tests successful (2)
SDL_RWops : All tests successful (5)
Rect : All tests successful (1)
SDL_Surface : All tests successful (6)
Rendering with cocoa driver : All tests successful (3)
Assert Failed!
Blit output not the same.
Test Case 'Renderer x11'
Test Suite 'Rendering with x11 driver'
Last SDL error ''
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150
Rendering with x11 driver : Failed 1 out of 4 testcases!
Rendering with dummy driver : All tests successful (3)
SDL_Audio : All tests successful (1)
Tests run with SDL 1.3.0 revision 1095906
System is running Mac OS X and is little endian
author | Eric Wing <ewing . public |-at-| gmail . com> |
---|---|
date | Sat, 08 May 2010 00:54:22 -0700 |
parents | f7b03b6838cb |
children |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2010 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ #include "SDL_config.h" /* RISC OS semiphores based on linux code */ #include "SDL_timer.h" #include "SDL_thread.h" #include "SDL_systhread_c.h" #if !SDL_THREADS_DISABLED SDL_sem * SDL_CreateSemaphore(Uint32 initial_value) { SDL_SetError("SDL not configured with thread support"); return (SDL_sem *) 0; } void SDL_DestroySemaphore(SDL_sem * sem) { return; } int SDL_SemTryWait(SDL_sem * sem) { SDL_SetError("SDL not configured with thread support"); return -1; } int SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout) { SDL_SetError("SDL not configured with thread support"); return -1; } int SDL_SemWait(SDL_sem * sem) { SDL_SetError("SDL not configured with thread support"); return -1; } Uint32 SDL_SemValue(SDL_sem * sem) { return 0; } int SDL_SemPost(SDL_sem * sem) { SDL_SetError("SDL not configured with thread support"); return -1; } #else #include <unistd.h> /* For getpid() */ #include <pthread.h> #include <semaphore.h> struct SDL_semaphore { sem_t *sem; sem_t sem_data; }; /* Create a semaphore, initialized with value */ SDL_sem * SDL_CreateSemaphore(Uint32 initial_value) { SDL_sem *sem = (SDL_sem *) SDL_malloc(sizeof(SDL_sem)); if (sem) { if (sem_init(&sem->sem_data, 0, initial_value) < 0) { SDL_SetError("sem_init() failed"); SDL_free(sem); sem = NULL; } else { sem->sem = &sem->sem_data; } } else { SDL_OutOfMemory(); } return sem; } void SDL_DestroySemaphore(SDL_sem * sem) { if (sem) { sem_destroy(sem->sem); SDL_free(sem); } } int SDL_SemTryWait(SDL_sem * sem) { int retval; if (!sem) { SDL_SetError("Passed a NULL semaphore"); return -1; } retval = SDL_MUTEX_TIMEDOUT; if (sem_trywait(sem->sem) == 0) { retval = 0; } return retval; } int SDL_SemWait(SDL_sem * sem) { int retval; if (!sem) { SDL_SetError("Passed a NULL semaphore"); return -1; } retval = sem_wait(sem->sem); if (retval < 0) { SDL_SetError("sem_wait() failed"); } return retval; } int SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout) { int retval; if (!sem) { SDL_SetError("Passed a NULL semaphore"); return -1; } /* Try the easy cases first */ if (timeout == 0) { return SDL_SemTryWait(sem); } if (timeout == SDL_MUTEX_MAXWAIT) { return SDL_SemWait(sem); } /* Ack! We have to busy wait... */ timeout += SDL_GetTicks(); do { retval = SDL_SemTryWait(sem); if (retval == 0) { break; } SDL_Delay(1); } while (SDL_GetTicks() < timeout); return retval; } Uint32 SDL_SemValue(SDL_sem * sem) { int ret = 0; if (sem) { sem_getvalue(sem->sem, &ret); if (ret < 0) { ret = 0; } } return (Uint32) ret; } int SDL_SemPost(SDL_sem * sem) { int retval; if (!sem) { SDL_SetError("Passed a NULL semaphore"); return -1; } retval = sem_post(sem->sem); if (retval < 0) { SDL_SetError("sem_post() failed"); } return retval; } #endif /* !SDL_THREADS_DISABLED */ /* vi: set ts=4 sw=4 expandtab: */