Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2010 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/

/**
 *  \file SDL_quit.h
 *  
 *  Include file for SDL quit event handling.
 */

#ifndef _SDL_quit_h
#define _SDL_quit_h

#include "SDL_stdinc.h"
#include "SDL_error.h"

/**
 *  \file SDL_quit.h
 *  
 *  An ::SDL_QUIT event is generated when the user tries to close the application
 *  window.  If it is ignored or filtered out, the window will remain open.
 *  If it is not ignored or filtered, it is queued normally and the window
 *  is allowed to close.  When the window is closed, screen updates will 
 *  complete, but have no effect.
 *
 *  SDL_Init() installs signal handlers for SIGINT (keyboard interrupt)
 *  and SIGTERM (system termination request), if handlers do not already
 *  exist, that generate ::SDL_QUIT events as well.  There is no way
 *  to determine the cause of an ::SDL_QUIT event, but setting a signal
 *  handler in your application will override the default generation of
 *  quit events for that signal.
 *  
 *  \sa SDL_Quit()
 */

/* There are no functions directly affecting the quit event */

#define SDL_QuitRequested() \
        (SDL_PumpEvents(), SDL_PeepEvents(NULL,0,SDL_PEEKEVENT,SDL_QUITMASK))

#endif /* _SDL_quit_h */