view README @ 4447:947201caa46e

Added automated test to Xcode project plus needed changes to SDL_RWFromFile to be OS X bundle aware. The Mac OS X project has a new target called testsdl which builds the automated test. I looked at using Xcode's native unit test support, but the impedance mismatch between the existing automated test structure and Apple's was more than I could handle. As such, the testsdl application is a full blown proper OS X application, which means it is a self-contained .app bundle. This immediately revealed some problems from the automated test. The largest problem was the assumption about the current working directory and where to find resources. (I suspect Windows may have a similar problem depending on circumstance.) To open resources, the test was looking in directories relative to the SDL source directory, but this will not work well with self-contained .app bundles and Xcode which can place its built applications almost anywhere. And for real-world situations, this is pretty useless anyway. So I modified SDL_RWFromFile to do special things on OS X. First, it will look for a file in the .app bundle. If not found, it will fallback and just call fopen as it used to do. I also had to modify the automated test itself because it had a contrieved test which called fopen directly to do read from an existing FILE pointer. In addition, there was a write test. Since a .app bundle is likely going to be read-only, I added a special case for OS X to write to NSTemporaryDirectory. I expect these changes should work for both Mac and iPhone OS (which includes iPad). I will update the iPhone Xcode project next. Finally, FYI, the X11 automated test seems to be failing. Below is my output. Pending breakpoint 4 - "-[NSException raise]" resolved Platform : All tests successful (2) SDL_RWops : All tests successful (5) Rect : All tests successful (1) SDL_Surface : All tests successful (6) Rendering with cocoa driver : All tests successful (3) Assert Failed! Blit output not the same. Test Case 'Renderer x11' Test Suite 'Rendering with x11 driver' Last SDL error '' Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetWindowBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSGetSurfaceBounds Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Sat May 8 00:30:34 iMacAL.local testsdl[71586] <Error>: kCGErrorIllegalArgument: CGSBindSurface: Invalid window 0xa150 Rendering with x11 driver : Failed 1 out of 4 testcases! Rendering with dummy driver : All tests successful (3) SDL_Audio : All tests successful (1) Tests run with SDL 1.3.0 revision 1095906 System is running Mac OS X and is little endian
author Eric Wing <ewing . public |-at-| gmail . com>
date Sat, 08 May 2010 00:54:22 -0700
parents 1ed5d432e468
children 797b37c0c046
line wrap: on
line source


                         Simple DirectMedia Layer

                                  (SDL)

                                Version 1.2

---
http://www.libsdl.org/

This is the Simple DirectMedia Layer, a general API that provides low
level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL,
and 2D framebuffer across multiple platforms.

The current version supports Linux, Windows, Windows CE, BeOS, MacOS,
Mac OS X, FreeBSD, NetBSD, OpenBSD, BSD/OS, Solaris, IRIX, and QNX.
The code contains support for AIX, OSF/Tru64, RISC OS, and SymbianOS,
but these are not officially supported.

SDL is written in C, but works with C++ natively, and has bindings to
several other languages, including Ada, C#, Eiffel, Erlang, Euphoria,
Guile, Haskell, Java, Lisp, Lua, ML, Objective C, Pascal, Perl, PHP,
Pike, Pliant, Python, Ruby, and Smalltalk.

This library is distributed under GNU LGPL version 2, which can be
found in the file  "COPYING".  This license allows you to use SDL
freely in commercial programs as long as you link with the dynamic
library.

The best way to learn how to use SDL is to check out the header files in
the "include" subdirectory and the programs in the "test" subdirectory.
The header files and test programs are well commented and always up to date.
More documentation is available in HTML format in "docs/index.html", and
a documentation wiki is available online at:
	http://www.libsdl.org/cgi/docwiki.cgi

The test programs in the "test" subdirectory are in the public domain.

Frequently asked questions are answered online:
	http://www.libsdl.org/faq.php

If you need help with the library, or just want to discuss SDL related
issues, you can join the developers mailing list:
	http://www.libsdl.org/mailing-list.php

Enjoy!
	Sam Lantinga				(slouken@libsdl.org)