view src/power/beos/SDL_syspower.c @ 3469:8c5fb2a3b11d

RenderReadPixels and RenderWritePixels functions work with back buffer now and all asynchronous operations are flushed before reading or writing to backbuffer. Thanks Sam for clarification of this.
author Mike Gorchak <lestat@i.com.ua>
date Sat, 21 Nov 2009 06:17:50 +0000
parents 51750b7a966f
children f7b03b6838cb
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2009 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#ifndef SDL_POWER_DISABLED
#ifdef SDL_POWER_BEOS

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <ctype.h>
#include <drivers/Drivers.h>

/* These values are from apm.h ... */
#define APM_DEVICE_PATH "/dev/misc/apm"
#define APM_FUNC_OFFSET 0x5300
#define APM_FUNC_GET_POWER_STATUS 10
#define APM_DEVICE_ALL 1
#define APM_BIOS_CALL (B_DEVICE_OP_CODES_END + 3)

#include "SDL_power.h"

SDL_bool
SDL_GetPowerInfo_BeOS(SDL_PowerState * state, int *seconds, int *percent)
{
    const int fd = open("/dev/misc/apm", O_RDONLY);
    SDL_bool need_details = SDL_FALSE;
    uint16 regs[6];
    uint8 ac_status;
    uint8 battery_status;
    uint8 battery_flags;
    uint8 battery_life;
    uint32 battery_time;

    if (fd == -1) {
        return SDL_FALSE;       /* maybe some other method will work? */
    }

    memset(regs, '\0', sizeof(regs));
    regs[0] = APM_FUNC_OFFSET + APM_FUNC_GET_POWER_STATUS;
    regs[1] = APM_DEVICE_ALL;
    rc = ioctl(fd, APM_BIOS_CALL, regs);
    close(fd);

    if (rc < 0) {
        return SDL_FALSE;
    }

    ac_status = regs[1] >> 8;
    battery_status = regs[1] & 0xFF;
    battery_flags = regs[2] >> 8;
    battery_life = regs[2] & 0xFF;
    battery_time = (uint32) regs[3];

    /* in theory, _something_ should be set in battery_flags, right? */
    if (battery_flags == 0x00) {        /* older APM BIOS? Less fields. */
        battery_time = 0xFFFF;
        if (battery_status == 0xFF) {
            battery_flags = 0xFF;
        } else {
            battery_flags = (1 << status.battery_status);
        }
    }

    if ((battery_time != 0xFFFF) && (battery_time & (1 << 15))) {
        /* time is in minutes, not seconds */
        battery_time = (battery_time & 0x7FFF) * 60;
    }

    if (battery_flags == 0xFF) {        /* unknown state */
        *state = SDL_POWERSTATE_UNKNOWN;
    } else if (battery_flags & (1 << 7)) {      /* no battery */
        *state = SDL_POWERSTATE_NO_BATTERY;
    } else if (battery_flags & (1 << 3)) {      /* charging */
        *state = SDL_POWERSTATE_CHARGING;
        need_details = SDL_TRUE;
    } else if (ac_status == 1) {
        *state = SDL_POWERSTATE_CHARGED;        /* on AC, not charging. */
        need_details = SDL_TRUE;
    } else {
        *state = SDL_POWERSTATE_ON_BATTERY;     /* not on AC. */
        need_details = SDL_TRUE;
    }

    *percent = -1;
    *seconds = -1;
    if (need_details) {
        const int pct = (int) battery_life;
        const int secs = (int) battery_time;

        if (pct != 255) {       /* 255 == unknown */
            *percent = (pct > 100) ? 100 : pct; /* clamp between 0%, 100% */
        }
        if (secs != 0xFFFF) {   /* 0xFFFF == unknown */
            *seconds = secs;
        }
    }

    return SDL_TRUE;            /* the definitive answer if APM driver replied. */
}

#endif /* SDL_POWER_BEOS */
#endif /* SDL_POWER_DISABLED */

/* vi: set ts=4 sw=4 expandtab: */