Mercurial > sdl-ios-xcode
view install-sh @ 632:85e104fe14c2
Date: Sun, 1 Jun 2003 15:38:45 -0700 (PDT)
From: Jeff Brown <jabrown@caida.org>
Subject: [patch] SDL-1.2.5 + FreeBSD joystick axes, hat fixes
Hello again! When I sent in some SDL fixes last December, I found out
they'd already been fixed in the CVS version. This time, I checked the
repository before bugging you. =)
I'm using SDL-1.2.5 on a FreeBSD 4.6.2-RELEASE system, and in the course
of getting my multi-analog-axis USB controller (with a hat switch!)
working with d2x-sdl -- the SDL port of the Descent 2 engine -- I came
across a few problems:
1) The second analog stick is reported as a slider in one direction, and
"Rz" in the other. SDL was ignoring the Rz axis, so I added Rx/Ry/Rz to
the set of things SDL considers to be axes.
2) After the above change, the set of JOYAXE_* axes for my gamepad was
{0,1,3,7}; however, d2x-sdl expects the axes to be contiguously numbered
from 0, which seems like a pretty reasonable expectation, rather than
having to scan the entire space of axes that SDL may or may not have.
So, I added a table lookup which maps the JOYAXE_* axis numbers to 0,1,...
in the order they're detected by SDL_SYS_JoystickOpen(), when reporting
them to the application. I also added a function "usage_to_joyaxe()"
which maps the USB HUG_* usage values to JOYAXE_values, since the repeated
case statements testing for HUG_* were getting out of hand.
3) The BSD joystick driver had no hat support, so I added it. It looks
like our USB library can only support one hat switch per device, which
makes life easy.
The patch against SDL-1.2.5 which implements these changes is at:
http://www.caida.org/~jabrown/patches/sdl-1.2.5-bsdhat.diff
After applying, SDL's "testjoystick" reports all activity from my gamepad
correctly, and d2x works too (though it needed some other fixes).
Moving on...
There is also a problem with slightly different USBHID library interfaces
on different versions of FreeBSD. I wasn't going to mention this since the
FreeBSD port for SDL-1.2.5 (and not SDL itself) was doing the FreeBSD
version-specific patching, so I e-mailed the port maintainer with this
change. However, I see that you've incorporated the FreeBSD
version-checking stuff into the CVS version of SDL, so now it's relevant
for you too.
The problem is, the FreeBSD #if tests don't work right for FreeBSD
4.6.2-RELEASE. There may be other versions with this problem, but I've
only tested 4.6.2-R. The following patch against your latest CVS version
fixes this:
--- SDL_sysjoystick.c-1.16 Tue Apr 15 09:02:08 2003
+++ SDL_sysjoystick.c Sun Jun 1 15:10:28 2003
@@ -420,6 +420,8 @@
# else
len = hid_report_size(rd, repinfo[repind].kind, r->rid);
# endif
+# elif (__FreeBSD_version == 460002)
+ len = hid_report_size(rd, r->rid, repinfo[repind].kind);
# else
len = hid_report_size(rd, repinfo[repind].kind, &r->rid);
#endif
I hope this is all useful to you. I've been getting myself dizzy playing
Descent 2 with it, all morning!
-Jeff Brown
P.S. My USB controller is a Thrustmaster Firestorm Dual Analog 2. That's
probably irrelevant, but I threw it in for completeness.
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Mon, 02 Jun 2003 14:50:22 +0000 |
parents | 74212992fb08 |
children |
line wrap: on
line source
#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: chmodcmd="" else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0