Mercurial > sdl-ios-xcode
view Makefile.in @ 3099:82e60908fab1
Date: Mon, 23 Mar 2009 09:17:24 +0200
From: "Mike Gorchak"
Subject: New QNX patches
Please apply patch qnx4.diff, which is attached. What has been done:
1)Added back OpenGL ES renderer for QNX target. Added few corrections to
OpenGL ES renderer to let it work under QNX. OpenGL ES renderer do not
support textures under QNX, so I think some additional work must be done.
2) Added GL_OES_query_matrix extension to SDL_opengles.h header file, which
required by OpenGL ES 1.1 specification.
3) Added attribute clearing at the entrance of function
SDL_GL_GetAttribure(). Added error checking into the function
SDL_GL_GetAttribure(), because some attributes can't be obtained in OpenGL
ES 1.0.
4) Porting testdyngles to OpenGL ES 1.0 (1.1 has glColor4ub() and
glColor4f() functions, but 1.0 has glColor4f() only).
5) Added error checking after obtaining attributes using
SDL_GL_GetAttribute() function to the testgl2 and testgles.
6) Small correction to testmultiaudio with printing errors.
7) Added software and accelerated OpenGL ES 1.0 support into the QNX GF
driver.
Please remove ./src/audio/nto directory - it will not be used anymore.
Please create ./src/audio/qsa directory and add content of the archive
qsa.tar.gz into this directory. I rewrote some sound code, added support for
multiple audio cards, enumeration, etc. Added initial support for capture.
As far as I can understand SDL 1.3 is not supporting audio capture right now
? Sam, Am I right ? Or audio capture must be supported through the
PlayDevice routine ?
And last, please put file SDL_gf_opengles.c to the ./src/video/qnxgf
directory. It is OpenGL ES 1.1 emulation layer for some functions, which are
not supported by OpenGL ES 1.0.
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Tue, 24 Mar 2009 10:33:12 +0000 |
parents | 1825768f1f72 |
children | 95e48f7a3a93 b7a48f533966 |
line wrap: on
line source
# Makefile to build and install the SDL library top_builddir = . srcdir = @srcdir@ objects = build depend = build-deps prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ libdir = @libdir@ includedir = @includedir@ datarootdir = @datarootdir@ datadir = @datadir@ mandir = @mandir@ auxdir = @ac_aux_dir@ distpath = $(srcdir)/.. distdir = SDL-@SDL_VERSION@ distfile = $(distdir).tar.gz @SET_MAKE@ SHELL = @SHELL@ CC = @CC@ INCLUDE = @INCLUDE@ CFLAGS = @BUILD_CFLAGS@ EXTRA_CFLAGS = @EXTRA_CFLAGS@ LDFLAGS = @BUILD_LDFLAGS@ EXTRA_LDFLAGS = @EXTRA_LDFLAGS@ LIBTOOL = @LIBTOOL@ INSTALL = @INSTALL@ NASM = @NASM@ @NASMFLAGS@ AR = @AR@ RANLIB = @RANLIB@ WINDRES = @WINDRES@ TARGET = libSDL.la SOURCES = @SOURCES@ OBJECTS = @OBJECTS@ SDLMAIN_TARGET = libSDLmain.a SDLMAIN_SOURCES = @SDLMAIN_SOURCES@ SDLMAIN_OBJECTS = @SDLMAIN_OBJECTS@ DIST = acinclude.m4 autogen.sh Borland.html Borland.zip BUGS build-scripts configure configure.in COPYING CREDITS docs docs.html include INSTALL Makefile.dc Makefile.minimal Makefile.in README* sdl-config.in sdl.m4 sdl.pc.in SDL.qpg.in SDL.spec SDL.spec.in src test TODO VisualC.html VisualC VisualCE Watcom-OS2.zip Watcom-Win32.zip WhatsNew Xcode HDRS = SDL.h SDL_audio.h SDL_cdrom.h SDL_compat.h SDL_cpuinfo.h SDL_endian.h SDL_error.h SDL_events.h SDL_haptic.h SDL_joystick.h SDL_keyboard.h SDL_keysym.h SDL_loadso.h SDL_main.h SDL_mouse.h SDL_mutex.h SDL_name.h SDL_opengl.h SDL_opengles.h SDL_pixels.h SDL_platform.h SDL_quit.h SDL_rect.h SDL_revision.h SDL_rwops.h SDL_scancode.h SDL_stdinc.h SDL_surface.h SDL_syswm.h SDL_thread.h SDL_timer.h SDL_types.h SDL_version.h SDL_video.h begin_code.h close_code.h LT_AGE = @LT_AGE@ LT_CURRENT = @LT_CURRENT@ LT_RELEASE = @LT_RELEASE@ LT_REVISION = @LT_REVISION@ LT_LDFLAGS = -no-undefined -rpath $(DESTDIR)$(libdir) -release $(LT_RELEASE) -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) all: $(srcdir)/configure Makefile $(objects) update-revision $(objects)/$(TARGET) $(objects)/$(SDLMAIN_TARGET) $(srcdir)/configure: $(srcdir)/configure.in @echo "Warning, configure.in is out of date" #(cd $(srcdir) && sh autogen.sh && sh configure) @sleep 3 Makefile: $(srcdir)/Makefile.in $(SHELL) config.status $@ $(objects): $(SHELL) $(auxdir)/mkinstalldirs $@ update-revision: $(SHELL) $(auxdir)/updaterev.sh .PHONY: all update-revision depend install install-bin install-hdrs install-lib install-data install-man uninstall uninstall-bin uninstall-hdrs uninstall-lib uninstall-data uninstall-man clean distclean dist depend: @SOURCES="$(SOURCES)" INCLUDE="$(INCLUDE)" output="$(depend)" \ $(SHELL) $(auxdir)/makedep.sh @for src in $(SDLMAIN_SOURCES); do \ obj=`echo $$src | sed -e 's|.*/||' -e 's|\.[^\.]*$$|.o|'`; \ echo "\$$(objects)/$$obj: $$src" >>$(depend); \ echo " \$$(CC) \$$(CFLAGS) \$$(EXTRA_CFLAGS) -c $$src -o \$$@" >>$(depend); \ done include $(depend) $(objects)/$(TARGET): $(OBJECTS) $(LIBTOOL) --mode=link $(CC) -o $@ $(OBJECTS) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LT_LDFLAGS) $(objects)/$(SDLMAIN_TARGET): $(SDLMAIN_OBJECTS) $(AR) cru $@ $(SDLMAIN_OBJECTS) $(RANLIB) $@ install: all install-bin install-hdrs install-lib install-data install-man install-bin: $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(bindir) $(INSTALL) -m 755 sdl-config $(DESTDIR)$(bindir)/sdl-config install-hdrs: $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(includedir)/SDL for file in $(HDRS); do \ $(INSTALL) -m 644 $(srcdir)/include/$$file $(DESTDIR)$(includedir)/SDL/$$file; \ done $(INSTALL) -m 644 include/SDL_config.h $(DESTDIR)$(includedir)/SDL/SDL_config.h install-lib: $(objects) $(objects)/$(TARGET) $(objects)/$(SDLMAIN_TARGET) $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(libdir) $(LIBTOOL) --mode=install $(INSTALL) $(objects)/$(TARGET) $(DESTDIR)$(libdir)/$(TARGET) $(INSTALL) -m 644 $(objects)/$(SDLMAIN_TARGET) $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET) $(RANLIB) $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET) install-data: $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(datadir)/aclocal $(INSTALL) -m 644 $(srcdir)/sdl.m4 $(DESTDIR)$(datadir)/aclocal/sdl.m4 $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(libdir)/pkgconfig $(INSTALL) -m 644 sdl.pc $(DESTDIR)$(libdir)/pkgconfig install-man: $(SHELL) $(auxdir)/mkinstalldirs $(DESTDIR)$(mandir)/man3 for src in $(srcdir)/docs/man3/*.3; do \ file=`echo $$src | sed -e 's|^.*/||'`; \ $(INSTALL) -m 644 $$src $(DESTDIR)$(mandir)/man3/$$file; \ done uninstall: uninstall-bin uninstall-hdrs uninstall-lib uninstall-data uninstall-man uninstall-bin: rm -f $(DESTDIR)$(bindir)/sdl-config uninstall-hdrs: for file in $(HDRS); do \ rm -f $(DESTDIR)$(includedir)/SDL/$$file; \ done rm -f $(DESTDIR)$(includedir)/SDL/SDL_config.h -rmdir $(DESTDIR)$(includedir)/SDL uninstall-lib: $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(TARGET) rm -f $(DESTDIR)$(libdir)/$(SDLMAIN_TARGET) uninstall-data: rm -f $(DESTDIR)$(datadir)/aclocal/sdl.m4 uninstall-man: for src in $(srcdir)/docs/man3/*.3; do \ file=`echo $$src | sed -e 's|^.*/||'`; \ rm -f $(DESTDIR)$(mandir)/man3/$$file; \ done clean: rm -rf $(objects) if test -f test/Makefile; then (cd test; $(MAKE) $@); fi distclean: clean rm -f Makefile include/SDL_config.h sdl-config rm -f SDL.qpg rm -f config.status config.cache config.log libtool $(depend) rm -rf $(srcdir)/autom4te* find $(srcdir) \( \ -name '*~' -o \ -name '*.bak' -o \ -name '*.old' -o \ -name '*.rej' -o \ -name '*.orig' -o \ -name '.#*' \) \ -exec rm -f {} \; cp $(srcdir)/include/SDL_config.h.default $(srcdir)/include/SDL_config.h if test -f test/Makefile; then (cd test; $(MAKE) $@); fi dist $(distfile): $(SHELL) $(auxdir)/mkinstalldirs $(distdir) tar cf - $(DIST) | (cd $(distdir); tar xf -) cp $(distdir)/include/SDL_config.h.default $(distdir)/include/SDL_config.h $(SHELL) $(distdir)/build-scripts/updaterev.sh rm -rf `find $(distdir) -name .svn` find $(distdir) \( \ -name '*~' -o \ -name '*.bak' -o \ -name '*.old' -o \ -name '*.rej' -o \ -name '*.orig' -o \ -name '.#*' \) \ -exec rm -f {} \; if test -f $(distdir)/test/Makefile; then (cd $(distdir)/test && make distclean); fi tar cvf - $(distdir) | gzip --best >$(distfile) rm -rf $(distdir) rpm: $(distfile) rpmbuild -ta $? # Run indent on the source to standardize coding style indent: @echo "Running indent... modified files:" @cd $(srcdir) && \ find . \( \ -name '*.h' -o \ -name '*.c' -o \ -name '*.cc' \) \ -print | fgrep -v ./Xcode | \ while read file; do \ indent "$$file" -o "$$file.indent"; \ if cmp "$$file" "$$file.indent" >/dev/null; then \ rm -f "$$file.indent"; \ else \ echo "$$file"; \ mv -f "$$file.indent" "$$file"; \ fi; \ done # Run indent and then commit modified files commit: indent svn commit # Create a SVN snapshot that people can run update on snapshot: $(SHELL) $(auxdir)/snapshot.sh