view src/SDL.c @ 4099:822f9624f984 SDL-1.2

Brian Fisher fixed bug #513 If an app requests a 24-bit opengl mode on a machine with a 32-bit desktop with the windib video backend, then when exiting fullscreen the desktop resolution is not restored The reason this is, is because the windib backend restores the desktop resolution when exiting fullscreen in DIB_SetVideoMode when it finds that the last request was for fullscreen by checking the original flags on the video surface. However, if the bits per pixel requested is different than current surface, the video surface is recreated and the original video flags are lost. So the check to see if we were exiting fullscreen fails. below is a patch to SDL_dibvideo.c that solves the problem by using the original flags in all cases. thanks!
author Sam Lantinga <slouken@libsdl.org>
date Fri, 28 Dec 2007 08:00:30 +0000
parents 8582c6a5ca16
children a1b03ba2fcd0
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/* Initialization code for SDL */

#include "SDL.h"
#include "SDL_fatal.h"
#if !SDL_VIDEO_DISABLED
#include "video/SDL_leaks.h"
#endif

#if SDL_THREAD_PTH
#include <pth.h>
#endif

/* Initialization/Cleanup routines */
#if !SDL_JOYSTICK_DISABLED
extern int  SDL_JoystickInit(void);
extern void SDL_JoystickQuit(void);
#endif
#if !SDL_CDROM_DISABLED
extern int  SDL_CDROMInit(void);
extern void SDL_CDROMQuit(void);
#endif
#if !SDL_TIMERS_DISABLED
extern void SDL_StartTicks(void);
extern int  SDL_TimerInit(void);
extern void SDL_TimerQuit(void);
#endif

/* The current SDL version */
static SDL_version version = 
	{ SDL_MAJOR_VERSION, SDL_MINOR_VERSION, SDL_PATCHLEVEL };

/* The initialized subsystems */
static Uint32 SDL_initialized = 0;
#if !SDL_TIMERS_DISABLED
static Uint32 ticks_started = 0;
#endif

#ifdef CHECK_LEAKS
int surfaces_allocated = 0;
#endif

int SDL_InitSubSystem(Uint32 flags)
{
#if !SDL_VIDEO_DISABLED
	/* Initialize the video/event subsystem */
	if ( (flags & SDL_INIT_VIDEO) && !(SDL_initialized & SDL_INIT_VIDEO) ) {
		if ( SDL_VideoInit(SDL_getenv("SDL_VIDEODRIVER"),
		                   (flags&SDL_INIT_EVENTTHREAD)) < 0 ) {
			return(-1);
		}
		SDL_initialized |= SDL_INIT_VIDEO;
	}
#else
	if ( flags & SDL_INIT_VIDEO ) {
		SDL_SetError("SDL not built with video support");
		return(-1);
	}
#endif

#if !SDL_AUDIO_DISABLED
	/* Initialize the audio subsystem */
	if ( (flags & SDL_INIT_AUDIO) && !(SDL_initialized & SDL_INIT_AUDIO) ) {
		if ( SDL_AudioInit(SDL_getenv("SDL_AUDIODRIVER")) < 0 ) {
			return(-1);
		}
		SDL_initialized |= SDL_INIT_AUDIO;
	}
#else
	if ( flags & SDL_INIT_AUDIO ) {
		SDL_SetError("SDL not built with audio support");
		return(-1);
	}
#endif

#if !SDL_TIMERS_DISABLED
	/* Initialize the timer subsystem */
	if ( ! ticks_started ) {
		SDL_StartTicks();
		ticks_started = 1;
	}
	if ( (flags & SDL_INIT_TIMER) && !(SDL_initialized & SDL_INIT_TIMER) ) {
		if ( SDL_TimerInit() < 0 ) {
			return(-1);
		}
		SDL_initialized |= SDL_INIT_TIMER;
	}
#else
	if ( flags & SDL_INIT_TIMER ) {
		SDL_SetError("SDL not built with timer support");
		return(-1);
	}
#endif

#if !SDL_JOYSTICK_DISABLED
	/* Initialize the joystick subsystem */
	if ( (flags & SDL_INIT_JOYSTICK) &&
	     !(SDL_initialized & SDL_INIT_JOYSTICK) ) {
		if ( SDL_JoystickInit() < 0 ) {
			return(-1);
		}
		SDL_initialized |= SDL_INIT_JOYSTICK;
	}
#else
	if ( flags & SDL_INIT_JOYSTICK ) {
		SDL_SetError("SDL not built with joystick support");
		return(-1);
	}
#endif

#if !SDL_CDROM_DISABLED
	/* Initialize the CD-ROM subsystem */
	if ( (flags & SDL_INIT_CDROM) && !(SDL_initialized & SDL_INIT_CDROM) ) {
		if ( SDL_CDROMInit() < 0 ) {
			return(-1);
		}
		SDL_initialized |= SDL_INIT_CDROM;
	}
#else
	if ( flags & SDL_INIT_CDROM ) {
		SDL_SetError("SDL not built with cdrom support");
		return(-1);
	}
#endif
	return(0);
}

int SDL_Init(Uint32 flags)
{
#if !SDL_THREADS_DISABLED && SDL_THREAD_PTH
	if (!pth_init()) {
		return -1;
	}
#endif

	/* Clear the error message */
	SDL_ClearError();

	/* Initialize the desired subsystems */
	if ( SDL_InitSubSystem(flags) < 0 ) {
		return(-1);
	}

	/* Everything is initialized */
	if ( !(flags & SDL_INIT_NOPARACHUTE) ) {
		SDL_InstallParachute();
	}
	return(0);
}

void SDL_QuitSubSystem(Uint32 flags)
{
	/* Shut down requested initialized subsystems */
#if !SDL_CDROM_DISABLED
	if ( (flags & SDL_initialized & SDL_INIT_CDROM) ) {
		SDL_CDROMQuit();
		SDL_initialized &= ~SDL_INIT_CDROM;
	}
#endif
#if !SDL_JOYSTICK_DISABLED
	if ( (flags & SDL_initialized & SDL_INIT_JOYSTICK) ) {
		SDL_JoystickQuit();
		SDL_initialized &= ~SDL_INIT_JOYSTICK;
	}
#endif
#if !SDL_TIMERS_DISABLED
	if ( (flags & SDL_initialized & SDL_INIT_TIMER) ) {
		SDL_TimerQuit();
		SDL_initialized &= ~SDL_INIT_TIMER;
	}
#endif
#if !SDL_AUDIO_DISABLED
	if ( (flags & SDL_initialized & SDL_INIT_AUDIO) ) {
		SDL_AudioQuit();
		SDL_initialized &= ~SDL_INIT_AUDIO;
	}
#endif
#if !SDL_VIDEO_DISABLED
	if ( (flags & SDL_initialized & SDL_INIT_VIDEO) ) {
		SDL_VideoQuit();
		SDL_initialized &= ~SDL_INIT_VIDEO;
	}
#endif
}

Uint32 SDL_WasInit(Uint32 flags)
{
	if ( ! flags ) {
		flags = SDL_INIT_EVERYTHING;
	}
	return (SDL_initialized&flags);
}

void SDL_Quit(void)
{
	/* Quit all subsystems */
#ifdef DEBUG_BUILD
  printf("[SDL_Quit] : Enter! Calling QuitSubSystem()\n"); fflush(stdout);
#endif
	SDL_QuitSubSystem(SDL_INIT_EVERYTHING);

#ifdef CHECK_LEAKS
#ifdef DEBUG_BUILD
  printf("[SDL_Quit] : CHECK_LEAKS\n"); fflush(stdout);
#endif

	/* Print the number of surfaces not freed */
	if ( surfaces_allocated != 0 ) {
		fprintf(stderr, "SDL Warning: %d SDL surfaces extant\n", 
							surfaces_allocated);
	}
#endif
#ifdef DEBUG_BUILD
  printf("[SDL_Quit] : SDL_UninstallParachute()\n"); fflush(stdout);
#endif

	/* Uninstall any parachute signal handlers */
	SDL_UninstallParachute();

#if !SDL_THREADS_DISABLED && SDL_THREAD_PTH
	pth_kill();
#endif
#ifdef DEBUG_BUILD
  printf("[SDL_Quit] : Returning!\n"); fflush(stdout);
#endif

}

/* Return the library version number */
const SDL_version * SDL_Linked_Version(void)
{
	return(&version);
}

#if defined(__OS2__)
/* Building for OS/2 */
#ifdef __WATCOMC__

#define INCL_DOSERRORS
#define INCL_DOSEXCEPTIONS
#include <os2.h>

/* Exception handler to prevent the Audio thread hanging, making a zombie process! */
ULONG _System SDL_Main_ExceptionHandler(PEXCEPTIONREPORTRECORD pERepRec,
                                        PEXCEPTIONREGISTRATIONRECORD pERegRec,
                                        PCONTEXTRECORD pCtxRec,
                                        PVOID p)
{
  if (pERepRec->fHandlerFlags & EH_EXIT_UNWIND)
    return XCPT_CONTINUE_SEARCH;
  if (pERepRec->fHandlerFlags & EH_UNWINDING)
    return XCPT_CONTINUE_SEARCH;
  if (pERepRec->fHandlerFlags & EH_NESTED_CALL)
    return XCPT_CONTINUE_SEARCH;

  /* Do cleanup at every fatal exception! */
  if (((pERepRec->ExceptionNum & XCPT_SEVERITY_CODE) == XCPT_FATAL_EXCEPTION) &&
      (pERepRec->ExceptionNum != XCPT_BREAKPOINT) &&
      (pERepRec->ExceptionNum != XCPT_SINGLE_STEP)
     )
  {
    if (SDL_initialized & SDL_INIT_AUDIO)
    {
      /* This removes the zombie audio thread in case of emergency. */
#ifdef DEBUG_BUILD
      printf("[SDL_Main_ExceptionHandler] : Calling SDL_CloseAudio()!\n");
#endif
      SDL_CloseAudio();
    }
  }
  return (XCPT_CONTINUE_SEARCH);
}


EXCEPTIONREGISTRATIONRECORD SDL_Main_xcpthand = {0, SDL_Main_ExceptionHandler};

/* The main DLL entry for DLL Initialization and Uninitialization: */
unsigned _System LibMain(unsigned hmod, unsigned termination)
{
  if (termination)
  {
#ifdef DEBUG_BUILD
/*    printf("[SDL DLL Unintialization] : Removing exception handler\n"); */
#endif
    DosUnsetExceptionHandler(&SDL_Main_xcpthand);
    return 1;
  } else
  {
#ifdef DEBUG_BUILD
    /* Make stdout and stderr unbuffered! */
    setbuf(stdout, NULL);
    setbuf(stderr, NULL);
#endif
    /* Fire up exception handler */
#ifdef DEBUG_BUILD
/*    printf("[SDL DLL Initialization] : Setting exception handler\n"); */
#endif
    /* Set exception handler */
    DosSetExceptionHandler(&SDL_Main_xcpthand);

    return 1;
  }
}
#endif /* __WATCOMC__ */

#elif defined(__WIN32__)  && !defined(__SYMBIAN32__)

#if !defined(HAVE_LIBC) || (defined(__WATCOMC__) && defined(BUILD_DLL))
/* Need to include DllMain() on Watcom C for some reason.. */
#define WIN32_LEAN_AND_MEAN
#include <windows.h>

BOOL APIENTRY _DllMainCRTStartup( HANDLE hModule, 
                       DWORD  ul_reason_for_call, 
                       LPVOID lpReserved )
{
	switch (ul_reason_for_call) {
		case DLL_PROCESS_ATTACH:
		case DLL_THREAD_ATTACH:
		case DLL_THREAD_DETACH:
		case DLL_PROCESS_DETACH:
			break;
	}
	return TRUE;
}
#endif /* building DLL with Watcom C */

#endif /* OS/2 elif __WIN32__ */