Mercurial > sdl-ios-xcode
view src/power/beos/SDL_syspower.c @ 4423:7953336267c2
Disable error checks for reset actuators and set autocenter.
Reset actuators and set autocenter might not actually be supported on all
implementations. We'll just disable error checking since they aren't
critical to neither opening the joystick nor the haptic subsystem.
author | Edgar Simo <bobbens@gmail.com> |
---|---|
date | Sun, 28 Feb 2010 09:23:23 +0000 |
parents | f7b03b6838cb |
children | b530ef003506 |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2010 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ #include "SDL_config.h" #ifndef SDL_POWER_DISABLED #ifdef SDL_POWER_BEOS #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <ctype.h> #include <drivers/Drivers.h> /* These values are from apm.h ... */ #define APM_DEVICE_PATH "/dev/misc/apm" #define APM_FUNC_OFFSET 0x5300 #define APM_FUNC_GET_POWER_STATUS 10 #define APM_DEVICE_ALL 1 #define APM_BIOS_CALL (B_DEVICE_OP_CODES_END + 3) #include "SDL_power.h" SDL_bool SDL_GetPowerInfo_BeOS(SDL_PowerState * state, int *seconds, int *percent) { const int fd = open("/dev/misc/apm", O_RDONLY); SDL_bool need_details = SDL_FALSE; uint16 regs[6]; uint8 ac_status; uint8 battery_status; uint8 battery_flags; uint8 battery_life; uint32 battery_time; if (fd == -1) { return SDL_FALSE; /* maybe some other method will work? */ } memset(regs, '\0', sizeof(regs)); regs[0] = APM_FUNC_OFFSET + APM_FUNC_GET_POWER_STATUS; regs[1] = APM_DEVICE_ALL; rc = ioctl(fd, APM_BIOS_CALL, regs); close(fd); if (rc < 0) { return SDL_FALSE; } ac_status = regs[1] >> 8; battery_status = regs[1] & 0xFF; battery_flags = regs[2] >> 8; battery_life = regs[2] & 0xFF; battery_time = (uint32) regs[3]; /* in theory, _something_ should be set in battery_flags, right? */ if (battery_flags == 0x00) { /* older APM BIOS? Less fields. */ battery_time = 0xFFFF; if (battery_status == 0xFF) { battery_flags = 0xFF; } else { battery_flags = (1 << status.battery_status); } } if ((battery_time != 0xFFFF) && (battery_time & (1 << 15))) { /* time is in minutes, not seconds */ battery_time = (battery_time & 0x7FFF) * 60; } if (battery_flags == 0xFF) { /* unknown state */ *state = SDL_POWERSTATE_UNKNOWN; } else if (battery_flags & (1 << 7)) { /* no battery */ *state = SDL_POWERSTATE_NO_BATTERY; } else if (battery_flags & (1 << 3)) { /* charging */ *state = SDL_POWERSTATE_CHARGING; need_details = SDL_TRUE; } else if (ac_status == 1) { *state = SDL_POWERSTATE_CHARGED; /* on AC, not charging. */ need_details = SDL_TRUE; } else { *state = SDL_POWERSTATE_ON_BATTERY; /* not on AC. */ need_details = SDL_TRUE; } *percent = -1; *seconds = -1; if (need_details) { const int pct = (int) battery_life; const int secs = (int) battery_time; if (pct != 255) { /* 255 == unknown */ *percent = (pct > 100) ? 100 : pct; /* clamp between 0%, 100% */ } if (secs != 0xFFFF) { /* 0xFFFF == unknown */ *seconds = secs; } } return SDL_TRUE; /* the definitive answer if APM driver replied. */ } #endif /* SDL_POWER_BEOS */ #endif /* SDL_POWER_DISABLED */ /* vi: set ts=4 sw=4 expandtab: */