view test/testfile.c @ 1555:780fd5b61df1

Fixed bug #89 Date: Sun, 23 Oct 2005 16:39:03 +0200 From: "A. Schmid" <sahib@phreaker.net> Subject: [SDL] no software surfaces with svgalib driver? Hi, I noticed that the SDL (1.2.9) svgalib driver only makes use of linear addressable (framebuffer) video modes. On older systems (like one of mine), linear addressable modes are often not available. Especially for cards with VESA VBE < 2.0 the svgalib vesa driver is unusable, since VESA only supports framebuffering for VBE 2.0 and later. The changes necessary to add support for software surfaces seem to be relatively small. I only had to hack src/video/svga/SDL_svgavideo.c (see attached patch). The code worked fine for me, but it is no more than a proof of concept and should be reviewed (probably has a memory leak when switching modes). It also uses the vgagl library (included in the svgalib package) and needs to be linked against it. -Alex
author Sam Lantinga <slouken@libsdl.org>
date Sun, 19 Mar 2006 12:05:16 +0000
parents b2b476a4a73c
children 14717b52abc0
line wrap: on
line source


/* sanity tests on SDL_rwops.c (usefull for alternative implementations of stdio rwops) */

#include <stdlib.h>

#include "SDL.h"
#include "SDL_endian.h"


#include <stdio.h>	

/* WARNING ! those 2 files will be destroyed by this test program */
#define FBASENAME1	"sdldata1"		/* this file will be created during tests */
#define FBASENAME2	"sdldata2"		/* this file should not exists before starting test */


#ifndef NULL
#define NULL ((void *)0)
#endif 

static void cleanup( void ) {

	unlink(FBASENAME1);
	unlink(FBASENAME2); 
}

static void rwops_error_quit( unsigned line, SDL_RWops *rwops) {
	
	printf("testfile.c(%d): failed\n",line);
	if (rwops) {
		rwops->close(rwops); /* This calls SDL_FreeRW(rwops); */
	}
	cleanup();
	exit(1); /* quit with rwops error (test failed) */
}

#define RWOP_ERR_QUIT(x)	rwops_error_quit( __LINE__, (x) )



int main(int argc, char *argv[])
{
	SDL_RWops *rwops = NULL;
	char test_buf[30];
	
	cleanup();

/* test 1 : basic argument test: all those calls to SDL_RWFromFile should fail */
	
	rwops = SDL_RWFromFile(NULL,NULL);
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(NULL,"ab+");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(NULL,"sldfkjsldkfj");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile("something","");
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile("something",NULL);
	if (rwops) RWOP_ERR_QUIT(rwops);	
	printf("test1 OK\n");

/* test 2 : check that inexistant file is not successfully opened/created when required */
/* modes : r, r+ implie that file MUST exist 
   modes : a, a+, w, w+ checks that it succeeds (file may not exists)
   
 */
	rwops = SDL_RWFromFile(FBASENAME2,"rb"); /* this file doesn't exist that call must fail */
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(FBASENAME2,"rb+"); /* this file doesn't exist that call must fail */
	if (rwops) RWOP_ERR_QUIT(rwops);
	rwops = SDL_RWFromFile(FBASENAME2,"wb");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"wb+");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"ab"); 
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	rwops = SDL_RWFromFile(FBASENAME2,"ab+");
	if (!rwops) RWOP_ERR_QUIT(rwops); 
	rwops->close(rwops); unlink(FBASENAME2);
	printf("test2 OK\n");

/* test 3 : creation, writing , reading, seeking, 
	        test : w mode, r mode, w+ mode
 */
	rwops = SDL_RWFromFile(FBASENAME1,"wb"); /* write only */	
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in write only mode */
	rwops->close(rwops);

	rwops = SDL_RWFromFile(FBASENAME1,"rb"); /* read mode, file must exists */
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	if (0!=rwops->write(rwops,test_buf,1,1))			RWOP_ERR_QUIT(rwops); /* readonly mode */
	rwops->close(rwops);

/* test 3: same with w+ mode */
	rwops = SDL_RWFromFile(FBASENAME1,"wb+"); /* write + read + truncation */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in read/write mode */
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test3 OK\n");

/* test 4: same in r+ mode */
	rwops = SDL_RWFromFile(FBASENAME1,"rb+"); /* write + read + file must exists, no truncation */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); /* we are in read/write mode */
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	if (20!=rwops->seek(rwops,-7,RW_SEEK_END))			RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);		
	if (2!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"12345678901234567890",20))	RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test4 OK\n");

/* test5 : append mode */
	rwops = SDL_RWFromFile(FBASENAME1,"ab+"); /* write + read + append */		
	if (!rwops)											RWOP_ERR_QUIT(rwops);
	if (1 != rwops->write(rwops,"1234567890",10,1) )	RWOP_ERR_QUIT(rwops);		
	if (10 != rwops->write(rwops,"1234567890",1,10) )	RWOP_ERR_QUIT(rwops);		
	if (7 != rwops->write(rwops,"1234567",1,7) )		RWOP_ERR_QUIT(rwops); 	
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	
	if (1!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops); 
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);					
	
	if (20+27!=rwops->seek(rwops,-7,RW_SEEK_END))		RWOP_ERR_QUIT(rwops);					
	if (7!=rwops->read(rwops,test_buf,1,7))				RWOP_ERR_QUIT(rwops);		
	if (SDL_memcmp(test_buf,"1234567",7))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,1,1))				RWOP_ERR_QUIT(rwops);		
	if (0!=rwops->read(rwops,test_buf,10,100))			RWOP_ERR_QUIT(rwops);		
	
	if (27!=rwops->seek(rwops,-27,RW_SEEK_CUR))			RWOP_ERR_QUIT(rwops);
	
	if (0!=rwops->seek(rwops,0L,RW_SEEK_SET))			RWOP_ERR_QUIT(rwops);
	if (3!=rwops->read(rwops,test_buf,10,3))			RWOP_ERR_QUIT(rwops);				
	if (SDL_memcmp(test_buf,"123456789012345678901234567123",30))	
														RWOP_ERR_QUIT(rwops);
	rwops->close(rwops);
	printf("test5 OK\n");
	cleanup();
	return 0; /* all ok */
}