Fixed bug #89 Date: Sun, 23 Oct 2005 16:39:03 +0200 From: "A. Schmid" <sahib@phreaker.net> Subject: [SDL] no software surfaces with svgalib driver? Hi, I noticed that the SDL (1.2.9) svgalib driver only makes use of linear addressable (framebuffer) video modes. On older systems (like one of mine), linear addressable modes are often not available. Especially for cards with VESA VBE < 2.0 the svgalib vesa driver is unusable, since VESA only supports framebuffering for VBE 2.0 and later. The changes necessary to add support for software surfaces seem to be relatively small. I only had to hack src/video/svga/SDL_svgavideo.c (see attached patch). The code worked fine for me, but it is no more than a proof of concept and should be reviewed (probably has a memory leak when switching modes). It also uses the vgagl library (included in the svgalib package) and needs to be linked against it. -Alex

#define picture_width 32
#define picture_height 32
static char picture_bits[] = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x80, 0x01, 0x18,
   0x64, 0x6f, 0xf6, 0x26, 0x0a, 0x00, 0x00, 0x50, 0xf2, 0xff, 0xff, 0x4f,
   0x14, 0x04, 0x00, 0x28, 0x14, 0x0e, 0x00, 0x28, 0x10, 0x32, 0x00, 0x08,
   0x94, 0x03, 0x00, 0x08, 0xf4, 0x04, 0x00, 0x08, 0xb0, 0x08, 0x00, 0x08,
   0x34, 0x01, 0x00, 0x28, 0x34, 0x01, 0x00, 0x28, 0x12, 0x00, 0x40, 0x48,
   0x12, 0x20, 0xa6, 0x48, 0x14, 0x50, 0x11, 0x29, 0x14, 0x50, 0x48, 0x2a,
   0x10, 0x27, 0xac, 0x0e, 0xd4, 0x71, 0xe8, 0x0a, 0x74, 0x20, 0xa8, 0x0a,
   0x14, 0x20, 0x00, 0x08, 0x10, 0x50, 0x00, 0x08, 0x14, 0x00, 0x00, 0x28,
   0x14, 0x00, 0x00, 0x28, 0xf2, 0xff, 0xff, 0x4f, 0x0a, 0x00, 0x00, 0x50,
   0x64, 0x6f, 0xf6, 0x26, 0x18, 0x80, 0x01, 0x18, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};