view test/testgamma.c @ 1212:7663bb0f52c7

To: sdl@libsdl.org From: Christian Walther <cwalther@gmx.ch> Date: Thu, 15 Dec 2005 21:19:53 +0100 Subject: [SDL] More mouse enhancements for Mac OS X The attached patch brings two more enhancements to mouse handling on Mac OS X (Quartz): 1. Currently, after launching an SDL application, SDL's notion of the mouse position is stuck in the top left corner (0,0) until the first time the mouse is moved. That's because the UpdateMouse() function isn't implemented in the Quartz driver. This patch adds it. 2. When grabbing input while the mouse cursor is hidden, the function CGAssociateMouseAndMouseCursorPosition(0) is called, which prevents the system's notion of the mouse location from moving (and therefore leaving the SDL window) even when the mouse is moved. However, apparently the Wacom tablet driver (and maybe other special pointing device drivers) doesn't care about that setting and still allows the mouse location to go outside of the window. Interestingly, the system cursor, which is made visible by the existing code in SDL in that case, does not follow the mouse location, but appears in the middle of the SDL window. The mouse location being outside of the window however means that mouse button events go to background applications (or the dock or whatever is there), which is very confusing to the user who sees no cursor outside of the SDL window. I have not found any way of intercepting these events (and that's probably by design, as "normal" applications shouldn't prevent the user from bringing other applications' windows to the front by clicking on them). An idea would be placing a fully transparent, screen-filling window in front of everything, but I fear that this might affect rendering performance (by doing unnecessary compositing, using up memory, or whatever). The deluxe solution to the problem would be talking to the tablet driver using AppleEvents to tell it to constrain its mapped area to the window (see Wacom's "TabletEventDemo" sample app, http://www.wacomeng.com/devsupport/mac/downloads.html), but I think that the bloat that solution would add to SDL would outweigh its usefulness. What I did instead in my patch is reassociating mouse and cursor when the mouse leaves the window while an invisible grab is in effect, and restoring the grab when the window is entered. That way, the grab can still be effectively broken by a tablet, but at least it's obvious to the user that it is broken. That change is minimal - it doesn't affect operation with a mouse (or a trackpad), and the code that it adds is not executed on every PumpEvents() call, only when entering and leaving the window. Unless there are any concerns about the patch, please apply. Feel free to shorten the lengthy comment in SDL_QuartzEvents.m if you think it's too verbose. Thanks -Christian
author Ryan C. Gordon <icculus@icculus.org>
date Mon, 02 Jan 2006 00:31:00 +0000
parents be9c9c8f6d53
children 782fd950bd46 c121d94672cb
line wrap: on
line source


/* Bring up a window and manipulate the gamma on it */

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>

#include "SDL.h"

/* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */
static void quit(int rc)
{
	SDL_Quit();
	exit(rc);
}

/* Turn a normal gamma value into an appropriate gamma ramp */
void CalculateGamma(double gamma, Uint16 *ramp)
{
	int i, value;

	gamma = 1.0 / gamma;
	for ( i=0; i<256; ++i ) {
		value = (int)(pow((double)i/256.0, gamma)*65535.0 + 0.5);
		if ( value > 65535 ) {
			value = 65535;
		}
		ramp[i] = (Uint16)value;
	}
}

/* This can be used as a general routine for all of the test programs */
int get_video_args(char *argv[], int *w, int *h, int *bpp, Uint32 *flags)
{
	int i;

	*w = 640;
	*h = 480;
	*bpp = 0;
	*flags = SDL_SWSURFACE;

	for ( i=1; argv[i]; ++i ) {
		if ( strcmp(argv[i], "-width") == 0 ) {
			if ( argv[i+1] ) {
				*w = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-height") == 0 ) {
			if ( argv[i+1] ) {
				*h = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-bpp") == 0 ) {
			if ( argv[i+1] ) {
				*bpp = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-fullscreen") == 0 ) {
			*flags |= SDL_FULLSCREEN;
		} else
		if ( strcmp(argv[i], "-hw") == 0 ) {
			*flags |= SDL_HWSURFACE;
		} else
		if ( strcmp(argv[i], "-hwpalette") == 0 ) {
			*flags |= SDL_HWPALETTE;
		} else
			break;
	}
	return i;
}

int main(int argc, char *argv[])
{
	SDL_Surface *screen;
	SDL_Surface *image;
	float gamma;
	int i;
	int w, h, bpp;
	Uint32 flags;
	Uint16 ramp[256];
	Uint16 red_ramp[256];
	Uint32 then, timeout;

	/* Check command line arguments */
	argv += get_video_args(argv, &w, &h, &bpp, &flags);

	/* Initialize SDL */
	if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) {
		fprintf(stderr,
			"Couldn't initialize SDL: %s\n", SDL_GetError());
		return(1);
	}

	/* Initialize the display, always use hardware palette */
	screen = SDL_SetVideoMode(w, h, bpp, flags | SDL_HWPALETTE);
	if ( screen == NULL ) {
		fprintf(stderr, "Couldn't set %dx%d video mode: %s\n",
						w, h, SDL_GetError());
		quit(1);
	}

	/* Set the window manager title bar */
	SDL_WM_SetCaption("SDL gamma test", "testgamma");

	/* Set the desired gamma, if any */
	gamma = 1.0f;
	if ( *argv ) {
		gamma = (float)atof(*argv);
	}
	if ( SDL_SetGamma(gamma, gamma, gamma) < 0 ) {
		fprintf(stderr, "Unable to set gamma: %s\n", SDL_GetError());
		quit(1);
	}

#if 0 /* This isn't supported.  Integrating the gamma ramps isn't exact */
	/* See what gamma was actually set */
	float real[3];
	if ( SDL_GetGamma(&real[0], &real[1], &real[2]) < 0 ) {
		printf("Couldn't get gamma: %s\n", SDL_GetError());
	} else {
		printf("Set gamma values: R=%2.2f, G=%2.2f, B=%2.2f\n",
			real[0], real[1], real[2]);
	}
#endif

	/* Do all the drawing work */
	image = SDL_LoadBMP("sample.bmp");
	if ( image ) {
		SDL_Rect dst;

		dst.x = (screen->w - image->w)/2;
		dst.y = (screen->h - image->h)/2;
		dst.w = image->w;
		dst.h = image->h;
		SDL_BlitSurface(image, NULL, screen, &dst);
		SDL_UpdateRects(screen, 1, &dst);
	}

	/* Wait a bit, handling events */
	then = SDL_GetTicks();
	timeout = (5*1000);
	while ( (SDL_GetTicks()-then) < timeout ) {
		SDL_Event event;

		while ( SDL_PollEvent(&event) ) {
			switch (event.type) {
			    case SDL_QUIT:	/* Quit now */
				timeout = 0;
				break;
			    case SDL_KEYDOWN:
				switch (event.key.keysym.sym) {
				    case SDLK_SPACE:	/* Go longer.. */
					timeout += (5*1000);
					break;
				    case SDLK_UP:
					gamma += 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_DOWN:
					gamma -= 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_ESCAPE:
					timeout = 0;
					break;
				    default:
					break;
				}
				break;
			}
		}
	}

	/* Perform a gamma flash to red using color ramps */
	while ( gamma < 10.0 ) {
		/* Increase the red gamma and decrease everything else... */
		gamma += 0.1f;
		CalculateGamma(gamma, red_ramp);
		CalculateGamma(1.0/gamma, ramp);
		SDL_SetGammaRamp(red_ramp, ramp, ramp);
	}
	/* Finish completely red */
	memset(red_ramp, 255, sizeof(red_ramp));
	memset(ramp, 0, sizeof(ramp));
	SDL_SetGammaRamp(red_ramp, ramp, ramp);

	/* Now fade out to black */
	for ( i=(red_ramp[0] >> 8); i >= 0; --i ) {
		memset(red_ramp, i, sizeof(red_ramp));
		SDL_SetGammaRamp(red_ramp, NULL, NULL);
	}
	SDL_Delay(1*1000);

	SDL_Quit();
	return(0);
}