Mercurial > sdl-ios-xcode
view src/video/SDL_blit_1.c @ 4072:6930cd5ab933 SDL-1.2
Final fix for bug #373
------- Comment #13 From Christian Walther 2007-07-15 10:04:56 [reply] -------
Created an attachment (id=229) [details]
patch to reinstate the SDL cursor after an NSApplicationActivatedEvent
Oops, you're right. My testcursor.c has diverged so far from the original that
I missed that. In fact, now that I think about it, that issue isn't even
addressed by the cursor rectangle patch - it is only concerned with windowed
mode (and fixes the problem there as a side effect). The problem in fullscreen
is still the same as before. How about the attachment for a fix? (I can confirm
that [NSCursor set] doesn't seem to have any effect when called from
QZ_DoActivate().)
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Sun, 15 Jul 2007 17:22:39 +0000 |
parents | d910939febfa |
children | 782fd950bd46 c121d94672cb a1b03ba2fcd0 |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2006 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Sam Lantinga slouken@libsdl.org */ #include "SDL_config.h" #include "SDL_video.h" #include "SDL_blit.h" #include "SDL_sysvideo.h" #include "SDL_endian.h" /* Functions to blit from 8-bit surfaces to other surfaces */ static void Blit1to1(SDL_BlitInfo *info) { #ifndef USE_DUFFS_LOOP int c; #endif int width, height; Uint8 *src, *map, *dst; int srcskip, dstskip; /* Set up some basic variables */ width = info->d_width; height = info->d_height; src = info->s_pixels; srcskip = info->s_skip; dst = info->d_pixels; dstskip = info->d_skip; map = info->table; while ( height-- ) { #ifdef USE_DUFFS_LOOP DUFFS_LOOP( { *dst = map[*src]; } dst++; src++; , width); #else for ( c=width; c; --c ) { *dst = map[*src]; dst++; src++; } #endif src += srcskip; dst += dstskip; } } /* This is now endian dependent */ #if ( SDL_BYTEORDER == SDL_LIL_ENDIAN ) #define HI 1 #define LO 0 #else /* ( SDL_BYTEORDER == SDL_BIG_ENDIAN ) */ #define HI 0 #define LO 1 #endif static void Blit1to2(SDL_BlitInfo *info) { #ifndef USE_DUFFS_LOOP int c; #endif int width, height; Uint8 *src, *dst; Uint16 *map; int srcskip, dstskip; /* Set up some basic variables */ width = info->d_width; height = info->d_height; src = info->s_pixels; srcskip = info->s_skip; dst = info->d_pixels; dstskip = info->d_skip; map = (Uint16 *)info->table; #ifdef USE_DUFFS_LOOP while ( height-- ) { DUFFS_LOOP( { *(Uint16 *)dst = map[*src++]; dst += 2; }, width); src += srcskip; dst += dstskip; } #else /* Memory align at 4-byte boundary, if necessary */ if ( (long)dst & 0x03 ) { /* Don't do anything if width is 0 */ if ( width == 0 ) { return; } --width; while ( height-- ) { /* Perform copy alignment */ *(Uint16 *)dst = map[*src++]; dst += 2; /* Copy in 4 pixel chunks */ for ( c=width/4; c; --c ) { *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; } /* Get any leftovers */ switch (width & 3) { case 3: *(Uint16 *)dst = map[*src++]; dst += 2; case 2: *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; break; case 1: *(Uint16 *)dst = map[*src++]; dst += 2; break; } src += srcskip; dst += dstskip; } } else { while ( height-- ) { /* Copy in 4 pixel chunks */ for ( c=width/4; c; --c ) { *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; } /* Get any leftovers */ switch (width & 3) { case 3: *(Uint16 *)dst = map[*src++]; dst += 2; case 2: *(Uint32 *)dst = (map[src[HI]]<<16)|(map[src[LO]]); src += 2; dst += 4; break; case 1: *(Uint16 *)dst = map[*src++]; dst += 2; break; } src += srcskip; dst += dstskip; } } #endif /* USE_DUFFS_LOOP */ } static void Blit1to3(SDL_BlitInfo *info) { #ifndef USE_DUFFS_LOOP int c; #endif int o; int width, height; Uint8 *src, *map, *dst; int srcskip, dstskip; /* Set up some basic variables */ width = info->d_width; height = info->d_height; src = info->s_pixels; srcskip = info->s_skip; dst = info->d_pixels; dstskip = info->d_skip; map = info->table; while ( height-- ) { #ifdef USE_DUFFS_LOOP DUFFS_LOOP( { o = *src * 4; dst[0] = map[o++]; dst[1] = map[o++]; dst[2] = map[o++]; } src++; dst += 3; , width); #else for ( c=width; c; --c ) { o = *src * 4; dst[0] = map[o++]; dst[1] = map[o++]; dst[2] = map[o++]; src++; dst += 3; } #endif /* USE_DUFFS_LOOP */ src += srcskip; dst += dstskip; } } static void Blit1to4(SDL_BlitInfo *info) { #ifndef USE_DUFFS_LOOP int c; #endif int width, height; Uint8 *src; Uint32 *map, *dst; int srcskip, dstskip; /* Set up some basic variables */ width = info->d_width; height = info->d_height; src = info->s_pixels; srcskip = info->s_skip; dst = (Uint32 *)info->d_pixels; dstskip = info->d_skip/4; map = (Uint32 *)info->table; while ( height-- ) { #ifdef USE_DUFFS_LOOP DUFFS_LOOP( *dst++ = map[*src++]; , width); #else for ( c=width/4; c; --c ) { *dst++ = map[*src++]; *dst++ = map[*src++]; *dst++ = map[*src++]; *dst++ = map[*src++]; } switch ( width & 3 ) { case 3: *dst++ = map[*src++]; case 2: *dst++ = map[*src++]; case 1: *dst++ = map[*src++]; } #endif /* USE_DUFFS_LOOP */ src += srcskip; dst += dstskip; } } static void Blit1to1Key(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint8 *dst = info->d_pixels; int dstskip = info->d_skip; Uint8 *palmap = info->table; Uint32 ckey = info->src->colorkey; if ( palmap ) { while ( height-- ) { DUFFS_LOOP( { if ( *src != ckey ) { *dst = palmap[*src]; } dst++; src++; }, width); src += srcskip; dst += dstskip; } } else { while ( height-- ) { DUFFS_LOOP( { if ( *src != ckey ) { *dst = *src; } dst++; src++; }, width); src += srcskip; dst += dstskip; } } } static void Blit1to2Key(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint16 *dstp = (Uint16 *)info->d_pixels; int dstskip = info->d_skip; Uint16 *palmap = (Uint16 *)info->table; Uint32 ckey = info->src->colorkey; /* Set up some basic variables */ dstskip /= 2; while ( height-- ) { DUFFS_LOOP( { if ( *src != ckey ) { *dstp=palmap[*src]; } src++; dstp++; }, width); src += srcskip; dstp += dstskip; } } static void Blit1to3Key(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint8 *dst = info->d_pixels; int dstskip = info->d_skip; Uint8 *palmap = info->table; Uint32 ckey = info->src->colorkey; int o; while ( height-- ) { DUFFS_LOOP( { if ( *src != ckey ) { o = *src * 4; dst[0] = palmap[o++]; dst[1] = palmap[o++]; dst[2] = palmap[o++]; } src++; dst += 3; }, width); src += srcskip; dst += dstskip; } } static void Blit1to4Key(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint32 *dstp = (Uint32 *)info->d_pixels; int dstskip = info->d_skip; Uint32 *palmap = (Uint32 *)info->table; Uint32 ckey = info->src->colorkey; /* Set up some basic variables */ dstskip /= 4; while ( height-- ) { DUFFS_LOOP( { if ( *src != ckey ) { *dstp = palmap[*src]; } src++; dstp++; }, width); src += srcskip; dstp += dstskip; } } static void Blit1toNAlpha(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint8 *dst = info->d_pixels; int dstskip = info->d_skip; SDL_PixelFormat *dstfmt = info->dst; const SDL_Color *srcpal = info->src->palette->colors; int dstbpp; const int A = info->src->alpha; /* Set up some basic variables */ dstbpp = dstfmt->BytesPerPixel; while ( height-- ) { int sR, sG, sB; int dR, dG, dB; DUFFS_LOOP4( { Uint32 pixel; sR = srcpal[*src].r; sG = srcpal[*src].g; sB = srcpal[*src].b; DISEMBLE_RGB(dst, dstbpp, dstfmt, pixel, dR, dG, dB); ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB); ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB); src++; dst += dstbpp; }, width); src += srcskip; dst += dstskip; } } static void Blit1toNAlphaKey(SDL_BlitInfo *info) { int width = info->d_width; int height = info->d_height; Uint8 *src = info->s_pixels; int srcskip = info->s_skip; Uint8 *dst = info->d_pixels; int dstskip = info->d_skip; SDL_PixelFormat *srcfmt = info->src; SDL_PixelFormat *dstfmt = info->dst; const SDL_Color *srcpal = info->src->palette->colors; Uint32 ckey = srcfmt->colorkey; int dstbpp; const int A = srcfmt->alpha; /* Set up some basic variables */ dstbpp = dstfmt->BytesPerPixel; while ( height-- ) { int sR, sG, sB; int dR, dG, dB; DUFFS_LOOP( { if ( *src != ckey ) { Uint32 pixel; sR = srcpal[*src].r; sG = srcpal[*src].g; sB = srcpal[*src].b; DISEMBLE_RGB(dst, dstbpp, dstfmt, pixel, dR, dG, dB); ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB); ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB); } src++; dst += dstbpp; }, width); src += srcskip; dst += dstskip; } } static SDL_loblit one_blit[] = { NULL, Blit1to1, Blit1to2, Blit1to3, Blit1to4 }; static SDL_loblit one_blitkey[] = { NULL, Blit1to1Key, Blit1to2Key, Blit1to3Key, Blit1to4Key }; SDL_loblit SDL_CalculateBlit1(SDL_Surface *surface, int blit_index) { int which; SDL_PixelFormat *dstfmt; dstfmt = surface->map->dst->format; if ( dstfmt->BitsPerPixel < 8 ) { which = 0; } else { which = dstfmt->BytesPerPixel; } switch(blit_index) { case 0: /* copy */ return one_blit[which]; case 1: /* colorkey */ return one_blitkey[which]; case 2: /* alpha */ /* Supporting 8bpp->8bpp alpha is doable but requires lots of tables which consume space and takes time to precompute, so is better left to the user */ return which >= 2 ? Blit1toNAlpha : NULL; case 3: /* alpha + colorkey */ return which >= 2 ? Blit1toNAlphaKey : NULL; } return NULL; }