view src/video/SDL_blit_1.c @ 4223:63fd67e17705 SDL-1.2

Fixed bug #727 Lorenzo Desole 2009-04-19 07:36:10 PDT I am one of the developers of a multimedia application (My Media System MMS), which uses SDL. MMS is normally running in fullscreen mode but it switches it off before launching external applications (mplayer, xine, etc.). The problem with fullscreen is that when the latter is switched off either via SDL_WM_ToggleFullScreen() or SDL_SetVideoMode(), SDL compares the current screen sizes with the ones saved when the video system was initted, and if they don't match, it calls XF86VidModeSwitchToMode() to switch to the old modeline. This makes it impossible for external programs and for MMS itself to use RandR to change the screen size, because next time fullscreen mode is turned off, it bombs out with the following error: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 136 (XFree86-VidModeExtension) Minor opcode of failed request: 10 (XF86VidModeSwitchToMode) [...] Obviously this happens only if the new screen resolution is smaller than the original one and XF86VidModeSwitchToMode() can't succeed. I couldn't find any way to inform SDL that the screen resolution it uses as reference is no longer valid. This can be fixed by adding "save_mode(this)" to ./src/video/x11/SDL_x11modes.c, API X11_EnterFullScreen(_THIS), like this: int X11_EnterFullScreen(_THIS) { int okay; + save_mode(this); I can't rule out possible side effects, but I don't see any. While I admit this is a minor issue for the general users, it is a major showstopper for our program where the ability to change screen resolution and refresh rate according to the movie being played, is very important. Thanks in advance.
author Sam Lantinga <slouken@libsdl.org>
date Mon, 21 Sep 2009 11:14:36 +0000
parents a1b03ba2fcd0
children
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2009 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

#include "SDL_video.h"
#include "SDL_blit.h"
#include "SDL_sysvideo.h"
#include "SDL_endian.h"

/* Functions to blit from 8-bit surfaces to other surfaces */

static void Blit1to1(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src, *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			{
			  *dst = map[*src];
			}
			dst++;
			src++;
		, width);
#else
		for ( c=width; c; --c ) {
		        *dst = map[*src];
			dst++;
			src++;
		}
#endif
		src += srcskip;
		dst += dstskip;
	}
}
/* This is now endian dependent */
#if ( SDL_BYTEORDER == SDL_LIL_ENDIAN )
#define HI	1
#define LO	0
#else /* ( SDL_BYTEORDER == SDL_BIG_ENDIAN ) */
#define HI	0
#define LO	1
#endif
static void Blit1to2(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src, *dst;
	Uint16 *map;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = (Uint16 *)info->table;

#ifdef USE_DUFFS_LOOP
	while ( height-- ) {
		DUFFS_LOOP(
		{
			*(Uint16 *)dst = map[*src++];
			dst += 2;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
#else
	/* Memory align at 4-byte boundary, if necessary */
	if ( (long)dst & 0x03 ) {
		/* Don't do anything if width is 0 */
		if ( width == 0 ) {
			return;
		}
		--width;

		while ( height-- ) {
			/* Perform copy alignment */
			*(Uint16 *)dst = map[*src++];
			dst += 2;

			/* Copy in 4 pixel chunks */
			for ( c=width/4; c; --c ) {
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
			}
			/* Get any leftovers */
			switch (width & 3) {
				case 3:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
				case 2:
					*(Uint32 *)dst =
					  (map[src[HI]]<<16)|(map[src[LO]]);
					src += 2;
					dst += 4;
					break;
				case 1:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
					break;
			}
			src += srcskip;
			dst += dstskip;
		}
	} else { 
		while ( height-- ) {
			/* Copy in 4 pixel chunks */
			for ( c=width/4; c; --c ) {
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
				*(Uint32 *)dst =
					(map[src[HI]]<<16)|(map[src[LO]]);
				src += 2;
				dst += 4;
			}
			/* Get any leftovers */
			switch (width & 3) {
				case 3:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
				case 2:
					*(Uint32 *)dst =
					  (map[src[HI]]<<16)|(map[src[LO]]);
					src += 2;
					dst += 4;
					break;
				case 1:
					*(Uint16 *)dst = map[*src++];
					dst += 2;
					break;
			}
			src += srcskip;
			dst += dstskip;
		}
	}
#endif /* USE_DUFFS_LOOP */
}
static void Blit1to3(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int o;
	int width, height;
	Uint8 *src, *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = info->d_pixels;
	dstskip = info->d_skip;
	map = info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			{
				o = *src * 4;
				dst[0] = map[o++];
				dst[1] = map[o++];
				dst[2] = map[o++];
			}
			src++;
			dst += 3;
		, width);
#else
		for ( c=width; c; --c ) {
			o = *src * 4;
			dst[0] = map[o++];
			dst[1] = map[o++];
			dst[2] = map[o++];
			src++;
			dst += 3;
		}
#endif /* USE_DUFFS_LOOP */
		src += srcskip;
		dst += dstskip;
	}
}
static void Blit1to4(SDL_BlitInfo *info)
{
#ifndef USE_DUFFS_LOOP
	int c;
#endif
	int width, height;
	Uint8 *src;
	Uint32 *map, *dst;
	int srcskip, dstskip;

	/* Set up some basic variables */
	width = info->d_width;
	height = info->d_height;
	src = info->s_pixels;
	srcskip = info->s_skip;
	dst = (Uint32 *)info->d_pixels;
	dstskip = info->d_skip/4;
	map = (Uint32 *)info->table;

	while ( height-- ) {
#ifdef USE_DUFFS_LOOP
		DUFFS_LOOP(
			*dst++ = map[*src++];
		, width);
#else
		for ( c=width/4; c; --c ) {
			*dst++ = map[*src++];
			*dst++ = map[*src++];
			*dst++ = map[*src++];
			*dst++ = map[*src++];
		}
		switch ( width & 3 ) {
			case 3:
				*dst++ = map[*src++];
			case 2:
				*dst++ = map[*src++];
			case 1:
				*dst++ = map[*src++];
		}
#endif /* USE_DUFFS_LOOP */
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1to1Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	Uint8 *palmap = info->table;
	Uint32 ckey = info->src->colorkey;
        
	if ( palmap ) {
		while ( height-- ) {
			DUFFS_LOOP(
			{
				if ( *src != ckey ) {
				  *dst = palmap[*src];
				}
				dst++;
				src++;
			},
			width);
			src += srcskip;
			dst += dstskip;
		}
	} else {
		while ( height-- ) {
			DUFFS_LOOP(
			{
				if ( *src != ckey ) {
				  *dst = *src;
				}
				dst++;
				src++;
			},
			width);
			src += srcskip;
			dst += dstskip;
		}
	}
}

static void Blit1to2Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint16 *dstp = (Uint16 *)info->d_pixels;
	int dstskip = info->d_skip;
	Uint16 *palmap = (Uint16 *)info->table;
	Uint32 ckey = info->src->colorkey;

	/* Set up some basic variables */
	dstskip /= 2;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				*dstp=palmap[*src];
			}
			src++;
			dstp++;
		},
		width);
		src += srcskip;
		dstp += dstskip;
	}
}

static void Blit1to3Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	Uint8 *palmap = info->table;
	Uint32 ckey = info->src->colorkey;
	int o;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				o = *src * 4;
				dst[0] = palmap[o++];
				dst[1] = palmap[o++];
				dst[2] = palmap[o++];
			}
			src++;
			dst += 3;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1to4Key(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint32 *dstp = (Uint32 *)info->d_pixels;
	int dstskip = info->d_skip;
	Uint32 *palmap = (Uint32 *)info->table;
	Uint32 ckey = info->src->colorkey;

	/* Set up some basic variables */
	dstskip /= 4;

	while ( height-- ) {
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
				*dstp = palmap[*src];
			}
			src++;
			dstp++;
		},
		width);
		src += srcskip;
		dstp += dstskip;
	}
}

static void Blit1toNAlpha(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	SDL_PixelFormat *dstfmt = info->dst;
	const SDL_Color *srcpal	= info->src->palette->colors;
	int dstbpp;
	const int A = info->src->alpha;

	/* Set up some basic variables */
	dstbpp = dstfmt->BytesPerPixel;

	while ( height-- ) {
	        int sR, sG, sB;
		int dR, dG, dB;
	    	DUFFS_LOOP4(
			{
			        Uint32 pixel;
				sR = srcpal[*src].r;
				sG = srcpal[*src].g;
				sB = srcpal[*src].b;
				DISEMBLE_RGB(dst, dstbpp, dstfmt,
					     pixel, dR, dG, dB);
				ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB);
			  	ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB);
				src++;
				dst += dstbpp;
			},
			width);
		src += srcskip;
		dst += dstskip;
	}
}

static void Blit1toNAlphaKey(SDL_BlitInfo *info)
{
	int width = info->d_width;
	int height = info->d_height;
	Uint8 *src = info->s_pixels;
	int srcskip = info->s_skip;
	Uint8 *dst = info->d_pixels;
	int dstskip = info->d_skip;
	SDL_PixelFormat *srcfmt = info->src;
	SDL_PixelFormat *dstfmt = info->dst;
	const SDL_Color *srcpal	= info->src->palette->colors;
	Uint32 ckey = srcfmt->colorkey;
	int dstbpp;
	const int A = srcfmt->alpha;

	/* Set up some basic variables */
	dstbpp = dstfmt->BytesPerPixel;

	while ( height-- ) {
	        int sR, sG, sB;
		int dR, dG, dB;
		DUFFS_LOOP(
		{
			if ( *src != ckey ) {
			        Uint32 pixel;
				sR = srcpal[*src].r;
				sG = srcpal[*src].g;
				sB = srcpal[*src].b;
				DISEMBLE_RGB(dst, dstbpp, dstfmt,
							pixel, dR, dG, dB);
				ALPHA_BLEND(sR, sG, sB, A, dR, dG, dB);
			  	ASSEMBLE_RGB(dst, dstbpp, dstfmt, dR, dG, dB);
			}
			src++;
			dst += dstbpp;
		},
		width);
		src += srcskip;
		dst += dstskip;
	}
}

static SDL_loblit one_blit[] = {
	NULL, Blit1to1, Blit1to2, Blit1to3, Blit1to4
};

static SDL_loblit one_blitkey[] = {
        NULL, Blit1to1Key, Blit1to2Key, Blit1to3Key, Blit1to4Key
};

SDL_loblit SDL_CalculateBlit1(SDL_Surface *surface, int blit_index)
{
	int which;
	SDL_PixelFormat *dstfmt;

	dstfmt = surface->map->dst->format;
	if ( dstfmt->BitsPerPixel < 8 ) {
		which = 0;
	} else {
		which = dstfmt->BytesPerPixel;
	}
	switch(blit_index) {
	case 0:			/* copy */
	    return one_blit[which];

	case 1:			/* colorkey */
	    return one_blitkey[which];

	case 2:			/* alpha */
	    /* Supporting 8bpp->8bpp alpha is doable but requires lots of
	       tables which consume space and takes time to precompute,
	       so is better left to the user */
	    return which >= 2 ? Blit1toNAlpha : NULL;

	case 3:			/* alpha + colorkey */
	    return which >= 2 ? Blit1toNAlphaKey : NULL;

	}
	return NULL;
}