view src/audio/dsp/SDL_dspaudio.c @ 1614:6162b8d921ce

Date: Wed, 29 Mar 2006 17:26:55 +0200 CEST From: "Fran���is Revol" Subject: [SDL] BeOS port fix: PrintScreen key crashing It seems the latest SDL crashes when someone hits the PrtScrn key in ZETA (BeOS R6), somewhere it gets a negative value as key code (or a big unsigned maybe ?), and uses it as an index in the keysym table... I'll investigate the cause for the negative value, but it's always better to check for bounds correctly when indexing a table. The attached diff fixes it. Fran���is Revol -- Software Architect yellowTAB GmbH
author Sam Lantinga <slouken@libsdl.org>
date Fri, 31 Mar 2006 06:16:20 +0000
parents 97d0966f4bf7
children 782fd950bd46 c121d94672cb aeb55f698ee3
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org

    Modified in Oct 2004 by Hannu Savolainen 
    hannu@opensound.com
*/
#include "SDL_config.h"

/* Allow access to a raw mixing buffer */

#include <stdio.h>	/* For perror() */
#include <string.h>	/* For strerror() */
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/stat.h>

#if SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H
/* This is installed on some systems */
#include <soundcard.h>
#else
/* This is recommended by OSS */
#include <sys/soundcard.h>
#endif

#include "SDL_timer.h"
#include "SDL_audio.h"
#include "../SDL_audiomem.h"
#include "../SDL_audio_c.h"
#include "../SDL_audiodev_c.h"
#include "SDL_dspaudio.h"

/* The tag name used by DSP audio */
#define DSP_DRIVER_NAME         "dsp"

/* Open the audio device for playback, and don't block if busy */
#define OPEN_FLAGS	(O_WRONLY|O_NONBLOCK)

/* Audio driver functions */
static int DSP_OpenAudio(_THIS, SDL_AudioSpec *spec);
static void DSP_WaitAudio(_THIS);
static void DSP_PlayAudio(_THIS);
static Uint8 *DSP_GetAudioBuf(_THIS);
static void DSP_CloseAudio(_THIS);

/* Audio driver bootstrap functions */

static int Audio_Available(void)
{
	int fd;
	int available;

	available = 0;
	fd = SDL_OpenAudioPath(NULL, 0, OPEN_FLAGS, 0);
	if ( fd >= 0 ) {
		available = 1;
		close(fd);
	}
	return(available);
}

static void Audio_DeleteDevice(SDL_AudioDevice *device)
{
	SDL_free(device->hidden);
	SDL_free(device);
}

static SDL_AudioDevice *Audio_CreateDevice(int devindex)
{
	SDL_AudioDevice *this;

	/* Initialize all variables that we clean on shutdown */
	this = (SDL_AudioDevice *)SDL_malloc(sizeof(SDL_AudioDevice));
	if ( this ) {
		SDL_memset(this, 0, (sizeof *this));
		this->hidden = (struct SDL_PrivateAudioData *)
				SDL_malloc((sizeof *this->hidden));
	}
	if ( (this == NULL) || (this->hidden == NULL) ) {
		SDL_OutOfMemory();
		if ( this ) {
			SDL_free(this);
		}
		return(0);
	}
	SDL_memset(this->hidden, 0, (sizeof *this->hidden));
	audio_fd = -1;

	/* Set the function pointers */
	this->OpenAudio = DSP_OpenAudio;
	this->WaitAudio = DSP_WaitAudio;
	this->PlayAudio = DSP_PlayAudio;
	this->GetAudioBuf = DSP_GetAudioBuf;
	this->CloseAudio = DSP_CloseAudio;

	this->free = Audio_DeleteDevice;

	return this;
}

AudioBootStrap DSP_bootstrap = {
	DSP_DRIVER_NAME, "OSS /dev/dsp standard audio",
	Audio_Available, Audio_CreateDevice
};

/* This function waits until it is possible to write a full sound buffer */
static void DSP_WaitAudio(_THIS)
{
	/* Not needed at all since OSS handles waiting automagically */
}

static void DSP_PlayAudio(_THIS)
{
	if (write(audio_fd, mixbuf, mixlen)==-1)
	{
		perror("Audio write");
		this->enabled = 0;
	}

#ifdef DEBUG_AUDIO
	fprintf(stderr, "Wrote %d bytes of audio data\n", mixlen);
#endif
}

static Uint8 *DSP_GetAudioBuf(_THIS)
{
	return(mixbuf);
}

static void DSP_CloseAudio(_THIS)
{
	if ( mixbuf != NULL ) {
		SDL_FreeAudioMem(mixbuf);
		mixbuf = NULL;
	}
	if ( audio_fd >= 0 ) {
		close(audio_fd);
		audio_fd = -1;
	}
}

static int DSP_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
	char audiodev[1024];
	int format;
	int value;
	int frag_spec;
	Uint16 test_format;

	/* Open the audio device */
	audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
	if ( audio_fd < 0 ) {
		SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
		return(-1);
	}
	mixbuf = NULL;

	/* Make the file descriptor use blocking writes with fcntl() */
	{ long flags;
		flags = fcntl(audio_fd, F_GETFL);
		flags &= ~O_NONBLOCK;
		if ( fcntl(audio_fd, F_SETFL, flags) < 0 ) {
			SDL_SetError("Couldn't set audio blocking mode");
			DSP_CloseAudio(this);
			return(-1);
		}
	}

	/* Get a list of supported hardware formats */
	if ( ioctl(audio_fd, SNDCTL_DSP_GETFMTS, &value) < 0 ) {
		perror("SNDCTL_DSP_GETFMTS");
		SDL_SetError("Couldn't get audio format list");
		DSP_CloseAudio(this);
		return(-1);
	}

	/* Try for a closest match on audio format */
	format = 0;
	for ( test_format = SDL_FirstAudioFormat(spec->format);
						! format && test_format; ) {
#ifdef DEBUG_AUDIO
		fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
		switch ( test_format ) {
			case AUDIO_U8:
				if ( value & AFMT_U8 ) {
					format = AFMT_U8;
				}
				break;
			case AUDIO_S16LSB:
				if ( value & AFMT_S16_LE ) {
					format = AFMT_S16_LE;
				}
				break;
			case AUDIO_S16MSB:
				if ( value & AFMT_S16_BE ) {
					format = AFMT_S16_BE;
				}
				break;
#if 0
/*
 * These formats are not used by any real life systems so they are not 
 * needed here.
 */
			case AUDIO_S8:
				if ( value & AFMT_S8 ) {
					format = AFMT_S8;
				}
				break;
			case AUDIO_U16LSB:
				if ( value & AFMT_U16_LE ) {
					format = AFMT_U16_LE;
				}
				break;
			case AUDIO_U16MSB:
				if ( value & AFMT_U16_BE ) {
					format = AFMT_U16_BE;
				}
				break;
#endif
			default:
				format = 0;
				break;
		}
		if ( ! format ) {
			test_format = SDL_NextAudioFormat();
		}
	}
	if ( format == 0 ) {
		SDL_SetError("Couldn't find any hardware audio formats");
		DSP_CloseAudio(this);
		return(-1);
	}
	spec->format = test_format;

	/* Set the audio format */
	value = format;
	if ( (ioctl(audio_fd, SNDCTL_DSP_SETFMT, &value) < 0) ||
						(value != format) ) {
		perror("SNDCTL_DSP_SETFMT");
		SDL_SetError("Couldn't set audio format");
		DSP_CloseAudio(this);
		return(-1);
	}

	/* Set the number of channels of output */
	value = spec->channels;
	if ( ioctl(audio_fd, SNDCTL_DSP_CHANNELS, &value) < 0 ) {
		perror("SNDCTL_DSP_CHANNELS");
		SDL_SetError("Cannot set the number of channels");
		DSP_CloseAudio(this);
		return(-1);
	}
	spec->channels = value;

	/* Set the DSP frequency */
	value = spec->freq;
	if ( ioctl(audio_fd, SNDCTL_DSP_SPEED, &value) < 0 ) {
		perror("SNDCTL_DSP_SPEED");
		SDL_SetError("Couldn't set audio frequency");
		DSP_CloseAudio(this);
		return(-1);
	}
	spec->freq = value;

	/* Calculate the final parameters for this audio specification */
	SDL_CalculateAudioSpec(spec);

	/* Determine the power of two of the fragment size */
	for ( frag_spec = 0; (0x01U<<frag_spec) < spec->size; ++frag_spec );
	if ( (0x01U<<frag_spec) != spec->size ) {
		SDL_SetError("Fragment size must be a power of two");
		DSP_CloseAudio(this);
		return(-1);
	}
	frag_spec |= 0x00020000;	/* two fragments, for low latency */

	/* Set the audio buffering parameters */
#ifdef DEBUG_AUDIO
	fprintf(stderr, "Requesting %d fragments of size %d\n",
		(frag_spec >> 16), 1<<(frag_spec&0xFFFF));
#endif
	if ( ioctl(audio_fd, SNDCTL_DSP_SETFRAGMENT, &frag_spec) < 0 ) {
		perror("SNDCTL_DSP_SETFRAGMENT");
	}
#ifdef DEBUG_AUDIO
	{ audio_buf_info info;
	  ioctl(audio_fd, SNDCTL_DSP_GETOSPACE, &info);
	  fprintf(stderr, "fragments = %d\n", info.fragments);
	  fprintf(stderr, "fragstotal = %d\n", info.fragstotal);
	  fprintf(stderr, "fragsize = %d\n", info.fragsize);
	  fprintf(stderr, "bytes = %d\n", info.bytes);
	}
#endif

	/* Allocate mixing buffer */
	mixlen = spec->size;
	mixbuf = (Uint8 *)SDL_AllocAudioMem(mixlen);
	if ( mixbuf == NULL ) {
		DSP_CloseAudio(this);
		return(-1);
	}
	SDL_memset(mixbuf, spec->silence, spec->size);

	/* Get the parent process id (we're the parent of the audio thread) */
	parent = getpid();

	/* We're ready to rock and roll. :-) */
	return(0);
}