view src/thread/os2/SDL_syssem.c @ 1192:54aa9aa32327

To: sdl@libsdl.org From: Christian Walther <cwalther@gmx.ch> Date: Fri, 18 Nov 2005 23:39:02 +0100 Subject: [SDL] Mouse position bugs on Mac OS X The attached patch fixes a few bugs in SDL related to the mouse position in windowed mode on Mac OS X, reproduced using the attached minimal test program - at least here on 10.3.9, with SDL CVS from today. Could anyone test whether the bugs exist and are fixed by the patch on 10.2 and 10.4? 1. When using OpenGL, the vertical mouse positions obtained through events or SDL_GetMouseState() are off by one. 2. When using OpenGL, SDL_WarpMouse() inverts the y coordinate. 3. Clicks on the topmost pixel row of the window are not recognized. 1 and 2 do not occur in non-OpenGL mode, while 3 does. All three only occur in windowed mode, not in fullscreen. The cause for 1 and 3 is that in Cocoa, "the location of the mouse" seems to be defined as "the location of the top left corner of the mouse pointer's hot pixel" (this is not documented, it's just what I found out here), which together with the fact that Cocoa's usual y coordinates start at the bottom and increase upwards means that the y coordinate of the mouse runs from 1 to h, not from 0 to h-1, in a window of height h. If it does work on 10.2 and 10.4 (I'll try to test it as soon as I can, but at the moment all I have at hand is 10.3.9), can this be applied to the CVS? -Christian To: sdl@libsdl.org From: Christian Walther <cwalther@gmx.ch> Date: Mon, 28 Nov 2005 10:41:51 +0100 Subject: [SDL] Re: Mouse position bugs on Mac OS X I wrote: > I'll try to test it as soon as I can, but at the moment all I have at hand is 10.3.9 So, here are the results of my tests (with patched and unpatched frameworks compiled with Xcode 1.5 (gcc 3.3) on 10.3.9): On 10.1.5, my test program doesn't run because of "Undefined symbols: SDL undefined reference to _CGMainDisplayID expected to be defined in Carbon". I guess not supporting 10.1 was a deliberate decision then and that's OK with me. On 10.2.8, 10.3.9, and 10.4.0, the bugs exist as described in my original post and are fixed by my patch. That is, there is no difference between pre/post 10.3 and the patched version works correctly in all combinations of GL/non-GL and windowed/fullscreen. I therefore recommend the patch for inclusion. -Christian
author Ryan C. Gordon <icculus@icculus.org>
date Mon, 28 Nov 2005 13:58:26 +0000
parents 173c063d4f55
children c9b51268668f
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002  Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.

    You should have received a copy of the GNU Library General Public
    License along with this library; if not, write to the Free
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Sam Lantinga
    slouken@libsdl.org
*/

#ifdef SAVE_RCSID
static char rcsid =
 "@(#) $Id$";
#endif

/* Semaphore functions using the OS/2 API */

#include <stdio.h>
#include <stdlib.h>
#define INCL_DOS
#define INCL_DOSERRORS
#define INCL_DOSSEMAPHORES
#include <os2.h>

#include "SDL_error.h"
#include "SDL_thread.h"
#include "SDL_timer.h"


struct SDL_semaphore {
        HMTX id;
        HEV  changed;
        Uint32 value;
};


/* Create a semaphore */
DECLSPEC SDL_sem * SDLCALL SDL_CreateSemaphore(Uint32 initial_value)
{
        SDL_sem *sem;
        ULONG ulrc;

        /* Allocate sem memory */
        sem = (SDL_sem *)malloc(sizeof(*sem));
        if ( sem ) {
                /* Create the mutex semaphore */
                ulrc = DosCreateMutexSem(NULL,&(sem->id),0,TRUE);
                if ( ulrc ) {
                        SDL_SetError("Couldn't create semaphore");
                        free(sem);
                        sem = NULL;
                } else
                {
                    DosCreateEventSem(NULL, &(sem->changed), 0, FALSE);
                    sem->value = initial_value;
                    DosReleaseMutexSem(sem->id);
                }
        } else {
                SDL_OutOfMemory();
        }
        return(sem);
}

/* Free the semaphore */
DECLSPEC void SDLCALL SDL_DestroySemaphore(SDL_sem *sem)
{
        if ( sem ) {
                if ( sem->id ) {
                        DosCloseEventSem(sem->changed);
                        DosCloseMutexSem(sem->id);
                        sem->id = 0;
                }
                free(sem);
        }
}

DECLSPEC int SDLCALL SDL_SemWaitTimeout(SDL_sem *sem, Uint32 timeout)
{
        ULONG ulrc;

        if ( ! sem ) {
                SDL_SetError("Passed a NULL sem");
                return -1;
        }

        if ( timeout == SDL_MUTEX_MAXWAIT ) {
           while (1) {
              ulrc = DosRequestMutexSem(sem->id, SEM_INDEFINITE_WAIT);
              if (ulrc) {
                 /* if error waiting mutex */
                 SDL_SetError("DosRequestMutexSem() failed");
                 return -1;
              } else if (sem->value) {
                        sem->value--;
                        DosReleaseMutexSem(sem->id);
                        return 0;
                     } else {
                        ULONG ulPostCount;
                        DosResetEventSem(sem->changed, &ulPostCount);
                        DosReleaseMutexSem(sem->id);
                        /* continue waiting until somebody posts the semaphore */
                        DosWaitEventSem(sem->changed, SEM_INDEFINITE_WAIT);
                     }
           }
        } else
        if ( timeout == 0 )
        {
            ulrc = DosRequestMutexSem(sem->id, SEM_INDEFINITE_WAIT);
            if (ulrc==NO_ERROR)
            {
                if (sem->value)
                {
                    sem->value--;
                    DosReleaseMutexSem(sem->id);
                    return 0;
                } else
                {
                    DosReleaseMutexSem(sem->id);
                    return SDL_MUTEX_TIMEDOUT;
                }
            } else
            {
                SDL_SetError("DosRequestMutexSem() failed");
                return -1;
            }
        } else {
            ulrc = DosRequestMutexSem(sem->id, SEM_INDEFINITE_WAIT);
            if (ulrc) {
               /* if error waiting mutex */
               SDL_SetError("DosRequestMutexSem() failed");
               return -1;
            } else
              if (sem->value) {
                sem->value--;
                DosReleaseMutexSem(sem->id);
                return 0;
              } else {
                ULONG ulPostCount;
                DosResetEventSem(sem->changed, &ulPostCount);
                DosReleaseMutexSem(sem->id);
                /* continue waiting until somebody posts the semaphore */
                ulrc = DosWaitEventSem(sem->changed, timeout);
                if (ulrc==NO_ERROR)
                  return 0;
                else
                  return SDL_MUTEX_TIMEDOUT;
              }
        }
        /* never reached */
        return -1;
}

DECLSPEC int SDLCALL SDL_SemTryWait(SDL_sem *sem)
{
        return SDL_SemWaitTimeout(sem, 0);
}

DECLSPEC int SDLCALL SDL_SemWait(SDL_sem *sem)
{
        return SDL_SemWaitTimeout(sem, SDL_MUTEX_MAXWAIT);
}

/* Returns the current count of the semaphore */
DECLSPEC Uint32 SDLCALL SDL_SemValue(SDL_sem *sem)
{
        if ( ! sem ) {
                SDL_SetError("Passed a NULL sem");
                return 0;
        }
        return sem->value;
}

DECLSPEC int SDLCALL SDL_SemPost(SDL_sem *sem)
{
        if ( ! sem ) {
                SDL_SetError("Passed a NULL sem");
                return -1;
        }
        if ( DosRequestMutexSem(sem->id,SEM_INDEFINITE_WAIT) ) {
                SDL_SetError("DosRequestMutexSem() failed");
                return -1;
        }
        sem->value++;
        DosPostEventSem(sem->changed);
        DosReleaseMutexSem(sem->id);
        return 0;
}