view src/joystick/mint/SDL_sysjoystick.c @ 1192:54aa9aa32327

To: sdl@libsdl.org From: Christian Walther <cwalther@gmx.ch> Date: Fri, 18 Nov 2005 23:39:02 +0100 Subject: [SDL] Mouse position bugs on Mac OS X The attached patch fixes a few bugs in SDL related to the mouse position in windowed mode on Mac OS X, reproduced using the attached minimal test program - at least here on 10.3.9, with SDL CVS from today. Could anyone test whether the bugs exist and are fixed by the patch on 10.2 and 10.4? 1. When using OpenGL, the vertical mouse positions obtained through events or SDL_GetMouseState() are off by one. 2. When using OpenGL, SDL_WarpMouse() inverts the y coordinate. 3. Clicks on the topmost pixel row of the window are not recognized. 1 and 2 do not occur in non-OpenGL mode, while 3 does. All three only occur in windowed mode, not in fullscreen. The cause for 1 and 3 is that in Cocoa, "the location of the mouse" seems to be defined as "the location of the top left corner of the mouse pointer's hot pixel" (this is not documented, it's just what I found out here), which together with the fact that Cocoa's usual y coordinates start at the bottom and increase upwards means that the y coordinate of the mouse runs from 1 to h, not from 0 to h-1, in a window of height h. If it does work on 10.2 and 10.4 (I'll try to test it as soon as I can, but at the moment all I have at hand is 10.3.9), can this be applied to the CVS? -Christian To: sdl@libsdl.org From: Christian Walther <cwalther@gmx.ch> Date: Mon, 28 Nov 2005 10:41:51 +0100 Subject: [SDL] Re: Mouse position bugs on Mac OS X I wrote: > I'll try to test it as soon as I can, but at the moment all I have at hand is 10.3.9 So, here are the results of my tests (with patched and unpatched frameworks compiled with Xcode 1.5 (gcc 3.3) on 10.3.9): On 10.1.5, my test program doesn't run because of "Undefined symbols: SDL undefined reference to _CGMainDisplayID expected to be defined in Carbon". I guess not supporting 10.1 was a deliberate decision then and that's OK with me. On 10.2.8, 10.3.9, and 10.4.0, the bugs exist as described in my original post and are fixed by my patch. That is, there is no difference between pre/post 10.3 and the patched version works correctly in all combinations of GL/non-GL and windowed/fullscreen. I therefore recommend the patch for inclusion. -Christian
author Ryan C. Gordon <icculus@icculus.org>
date Mon, 28 Nov 2005 13:58:26 +0000
parents 39b5606fa543
children c9b51268668f
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2004 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.

    You should have received a copy of the GNU Library General Public
    License along with this library; if not, write to the Free
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Sam Lantinga
    slouken@libsdl.org
*/

#ifdef SAVE_RCSID
static char rcsid =
 "@(#) $Id$";
#endif

/*
 *	Atari Joystick/Joypad drivers
 *
 *	Patrice Mandin
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include <mint/cookie.h>
#include <mint/osbind.h>

#include "SDL_types.h"
#include "SDL_error.h"
#include "SDL_joystick.h"
#include "SDL_sysjoystick.h"
#include "SDL_joystick_c.h"

#include "SDL_ikbdinterrupt_s.h"
#include "SDL_xbiosevents_c.h"
#include "SDL_xbiosinterrupt_s.h"

/*--- Const ---*/

/* We can have:
	1 joystick on IKBD port 1, read via hardware I/O
      or same joystick on IKBD port 1, read via xbios
	2 joypads on ports A,B
	  or 4 joysticks on joypads ports A,B
	  or 1 lightpen on joypad port A
	  or 2 analog paddles on joypads ports A,B
	2 joysticks on parallel port
*/

enum {
	IKBD_JOY1=0,
	XBIOS_JOY1,
	PORTA_PAD,
	PORTB_PAD,
	PORTA_JOY0,
	PORTA_JOY1,
	PORTB_JOY0,
	PORTB_JOY1,
	PORTA_LP,
	PORTA_ANPAD,
	PORTB_ANPAD,
#if 0
	PARA_JOY0,
	PARA_JOY1,
#endif
	MAX_JOYSTICKS
};

enum {
	MCH_ST=0,
	MCH_STE,
	MCH_TT,
	MCH_F30,
	MCH_CLONE,
	MCH_ARANYM
};

/*	Joypad buttons
 *		Procontroller note:
 *			L,R are connected to 4,6
 *			X,Y,Z are connected to 7,8,9
 */

enum {
	JP_UP=0,	JP_DOWN,	JP_LEFT,	JP_RIGHT,
	JP_KPMULT,	JP_KP7,		JP_KP4,		JP_KP1,
	JP_KP0,		JP_KP8,		JP_KP5,		JP_KP2,
	JP_KPNUM,	JP_KP9,		JP_KP6,		JP_KP3,
	JP_PAUSE,	JP_FIRE0,	JP_UNDEF0,	JP_FIRE1,
	JP_UNDEF1,	JP_FIRE2,	JP_UNDEF2,	JP_OPTION
};

#define JP_NUM_BUTTONS 17

#define PORT_JS_RIGHT	(1<<0)
#define PORT_JS_LEFT	(1<<1)
#define PORT_JS_DOWN	(1<<2)
#define PORT_JS_UP		(1<<3)
#define PORT_JS_FIRE	(1<<4)

/*--- Types ---*/

typedef struct {
	SDL_bool enabled;
	unsigned char *name;
	Uint32 prevstate;
} atarijoy_t;

/*--- Variables ---*/

static atarijoy_t atarijoysticks[MAX_JOYSTICKS]={
	{SDL_FALSE,"IKBD joystick port 1",0},
	{SDL_FALSE,"Xbios joystick port 1",0},
	{SDL_FALSE,"Joypad port A",0},
	{SDL_FALSE,"Joypad port B",0},
	{SDL_FALSE,"Joystick 0 port A",0},
	{SDL_FALSE,"Joystick 1 port A",0},
	{SDL_FALSE,"Joystick 0 port B",0},
	{SDL_FALSE,"Joystick 1 port B",0},
	{SDL_FALSE,"Lightpen port A",0},
	{SDL_FALSE,"Analog paddle port A",0},
	{SDL_FALSE,"Analog paddle port B",0}
#if 0
	,{SDL_FALSE,"Joystick 0 parallel port",0},
	{SDL_FALSE,"Joystick 1 parallel port",0}
#endif
};

static const int jp_buttons[JP_NUM_BUTTONS]={
	JP_FIRE0,	JP_FIRE1,	JP_FIRE2,	JP_PAUSE,
	JP_OPTION,	JP_KPMULT,	JP_KPNUM,	JP_KP0,
	JP_KP1,		JP_KP2,		JP_KP3,		JP_KP4,
	JP_KP5,		JP_KP6,		JP_KP7,		JP_KP8,
	JP_KP9
};

static SDL_bool joypad_ports_enabled=SDL_FALSE;

/* Updated joypad ports */
static Uint16 jp_paddles[4];
static Uint16 jp_lightpens[2];
static Uint16 jp_directions;
static Uint16 jp_fires;
static Uint32 jp_joypads[2];

/*--- Functions prototypes ---*/

static int GetEnabledAtariJoystick(int index);
static void UpdateJoypads(void);

/*--- Functions ---*/

int SDL_SYS_JoystickInit(void)
{
	int i;
	unsigned long cookie_mch;
	const char *envr=getenv("SDL_JOYSTICK_ATARI");
	
#define TEST_JOY_ENABLED(env,idstring,num) \
	if (strstr(env,idstring"-off")) { \
		atarijoysticks[num].enabled=SDL_FALSE; \
	} \
	if (strstr(env,idstring"-on")) { \
		atarijoysticks[num].enabled=SDL_TRUE; \
	}

	/* Cookie _MCH present ? if not, assume ST machine */
	if (Getcookie(C__MCH, &cookie_mch) != C_FOUND) {
		cookie_mch = MCH_ST << 16;
	}

	/* Enable some default joysticks */
	if ((cookie_mch == MCH_ST<<16) || ((cookie_mch>>16) == MCH_STE) ||
		(cookie_mch == MCH_TT<<16) || (cookie_mch == MCH_F30<<16) ||
		(cookie_mch == MCH_ARANYM<<16)) {
		atarijoysticks[IKBD_JOY1].enabled=(SDL_AtariIkbd_enabled!=0);
	}
	if ((cookie_mch == MCH_STE<<16) || (cookie_mch == MCH_F30<<16)) {
		atarijoysticks[PORTA_PAD].enabled=SDL_TRUE;
		atarijoysticks[PORTB_PAD].enabled=SDL_TRUE;
	}
	if (!atarijoysticks[IKBD_JOY1].enabled) {
		atarijoysticks[XBIOS_JOY1].enabled=(SDL_AtariXbios_enabled!=0);
	}

	/* Read environment for joysticks to enable */
	if (envr) {
		/* IKBD on any Atari, maybe clones */
		if ((cookie_mch == MCH_ST<<16) || ((cookie_mch>>16) == MCH_STE) ||
			(cookie_mch == MCH_TT<<16) || (cookie_mch == MCH_F30<<16) ||
			(cookie_mch == MCH_ARANYM<<16)) {
			if (SDL_AtariIkbd_enabled!=0) {
				TEST_JOY_ENABLED(envr, "ikbd-joy1", IKBD_JOY1);
			}
		}
		/* Joypads ports only on STE and Falcon */
		if ((cookie_mch == MCH_STE<<16) || (cookie_mch == MCH_F30<<16)) {
			TEST_JOY_ENABLED(envr, "porta-pad", PORTA_PAD);
			if (!atarijoysticks[PORTA_PAD].enabled) {
				TEST_JOY_ENABLED(envr, "porta-joy0", PORTA_JOY0);
				TEST_JOY_ENABLED(envr, "porta-joy1", PORTA_JOY1);
				if (!(atarijoysticks[PORTA_JOY0].enabled) && !(atarijoysticks[PORTA_JOY1].enabled)) {
					TEST_JOY_ENABLED(envr, "porta-lp", PORTA_LP);
					if (!atarijoysticks[PORTA_LP].enabled) {
						TEST_JOY_ENABLED(envr, "porta-anpad", PORTA_ANPAD);
					}
				}
			}

			TEST_JOY_ENABLED(envr, "portb-pad", PORTB_PAD);
			if (!atarijoysticks[PORTB_PAD].enabled) {
				TEST_JOY_ENABLED(envr, "portb-joy0", PORTB_JOY0);
				TEST_JOY_ENABLED(envr, "portb-joy1", PORTB_JOY1);
				if (!(atarijoysticks[PORTB_JOY0].enabled) && !(atarijoysticks[PORTB_JOY1].enabled)) {
					TEST_JOY_ENABLED(envr, "portb-anpad", PORTB_ANPAD);
				}
			}
		}

		if (!atarijoysticks[IKBD_JOY1].enabled) {
			if (SDL_AtariXbios_enabled!=0) {
				TEST_JOY_ENABLED(envr, "xbios-joy1", XBIOS_JOY1);
			}
		}
#if 0
		/* Parallel port on any Atari, maybe clones */
		if ((cookie_mch == MCH_ST<<16) || ((cookie_mch>>16) == MCH_STE) ||
			(cookie_mch == MCH_TT<<16) || (cookie_mch == MCH_F30<<16)) {
			TEST_JOY_ENABLED(envr, "para-joy0", PARA_JOY0);
			TEST_JOY_ENABLED(envr, "para-joy1", PARA_JOY1);
		}
#endif
	}

	/* Need to update joypad ports ? */
	joypad_ports_enabled=SDL_FALSE;
	for (i=PORTA_PAD;i<=PORTB_ANPAD;i++) {
		if (atarijoysticks[i].enabled) {
			joypad_ports_enabled=SDL_TRUE;
			break;
		}
	}

	SDL_numjoysticks = 0;
	for (i=0;i<MAX_JOYSTICKS;i++) {
		if (atarijoysticks[i].enabled) {
			++SDL_numjoysticks;
		}
	}

	return(SDL_numjoysticks);
}

static int GetEnabledAtariJoystick(int index)
{
	int i,j;

	/* Return the nth'index' enabled atari joystick */
	j=0;
	for (i=0;i<MAX_JOYSTICKS;i++) {
		if (!atarijoysticks[i].enabled) {
			continue;
		}

		if (j==index) {
			break;
		}

		++j;
	}
	if (i==MAX_JOYSTICKS)
		return -1;

	return i;
}

const char *SDL_SYS_JoystickName(int index)
{
	int numjoystick;

	numjoystick=GetEnabledAtariJoystick(index);
	if (numjoystick==-1)
		return NULL;

	return(atarijoysticks[numjoystick].name);
}

int SDL_SYS_JoystickOpen(SDL_Joystick *joystick)
{
	int numjoystick;
	
	numjoystick=GetEnabledAtariJoystick(joystick->index);
	if (numjoystick==-1)
		return -1;
	
	joystick->naxes=0;
	joystick->nhats=0;
	joystick->nballs=0;

	switch(numjoystick) {
		case PORTA_PAD:
		case PORTB_PAD:
			joystick->nhats=1;
			joystick->nbuttons=JP_NUM_BUTTONS;
			break;
		case PORTA_LP:
		case PORTA_ANPAD:
		case PORTB_ANPAD:
			joystick->naxes=2;
			joystick->nbuttons=2;
			break;
		default:
			joystick->nhats=1;
			joystick->nbuttons=1;
			break;
	}

	return(0);
}

void SDL_SYS_JoystickUpdate(SDL_Joystick *joystick)
{
	int numjoystick;
	Uint8 hatstate;
	Uint32 curstate,prevstate;
	
	numjoystick=GetEnabledAtariJoystick(joystick->index);
	if (numjoystick==-1)
		return;

	prevstate = atarijoysticks[numjoystick].prevstate;

	if (joypad_ports_enabled) {
		Supexec(UpdateJoypads);
	}

	switch (numjoystick) {
		case IKBD_JOY1:
		case XBIOS_JOY1:
			{
				curstate = 0;

				if (numjoystick==IKBD_JOY1) {
					curstate = SDL_AtariIkbd_joystick & 0xff;
				}
				if (numjoystick==XBIOS_JOY1) {
					curstate = SDL_AtariXbios_joystick & 0xff;
				}

				if (curstate != prevstate) {
					hatstate = SDL_HAT_CENTERED;
					if (curstate & IKBD_JOY_LEFT) {
						hatstate |= SDL_HAT_LEFT;
					}
					if (curstate & IKBD_JOY_RIGHT) {
						hatstate |= SDL_HAT_RIGHT;
					}
					if (curstate & IKBD_JOY_UP) {
						hatstate |= SDL_HAT_UP;
					}
					if (curstate & IKBD_JOY_DOWN) {
						hatstate |= SDL_HAT_DOWN;
					}
					SDL_PrivateJoystickHat(joystick, 0, hatstate);

					/* Button */
					if ((curstate & IKBD_JOY_FIRE) && !(prevstate & IKBD_JOY_FIRE)) {
						SDL_PrivateJoystickButton(joystick,0,SDL_PRESSED);
					}
					if (!(curstate & IKBD_JOY_FIRE) && (prevstate & IKBD_JOY_FIRE)) {
						SDL_PrivateJoystickButton(joystick,0,SDL_RELEASED);
					}
				}
				atarijoysticks[numjoystick].prevstate = curstate;
			}
			break;
		case PORTA_PAD:
		case PORTB_PAD:
			{
				int numjoypad,i;
				
				numjoypad=0;
				if (numjoystick==PORTB_PAD) numjoypad=1;
				
				curstate=jp_joypads[numjoypad];
				if (curstate!=prevstate) {
					hatstate = SDL_HAT_CENTERED;
					if (curstate & (1<<JP_LEFT)) {
						hatstate |= SDL_HAT_LEFT;
					}
					if (curstate & (1<<JP_RIGHT)) {
						hatstate |= SDL_HAT_RIGHT;
					}
					if (curstate & (1<<JP_UP)) {
						hatstate |= SDL_HAT_UP;
					}
					if (curstate & (1<<JP_DOWN)) {
						hatstate |= SDL_HAT_DOWN;
					}
					SDL_PrivateJoystickHat(joystick, 0, hatstate);

					/* Buttons */
					for (i=0;i<JP_NUM_BUTTONS;i++) {
						int button;
						
						button=1<<jp_buttons[i];

						if ((curstate & button) && !(prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_PRESSED);
						}
						if (!(curstate & button) && (prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_RELEASED);
						}
					}
				}
				atarijoysticks[numjoystick].prevstate = curstate;
			}
			break;
		case PORTA_JOY0:
		case PORTA_JOY1:
		case PORTB_JOY0:
		case PORTB_JOY1:
			{
				int fire_shift=0,dir_shift=0;
				
				if (numjoystick==PORTA_JOY0) {	fire_shift=0; dir_shift=0; }
				if (numjoystick==PORTA_JOY1) {	fire_shift=1; dir_shift=4; }
				if (numjoystick==PORTB_JOY0) {	fire_shift=2; dir_shift=8; }
				if (numjoystick==PORTB_JOY1) {	fire_shift=3; dir_shift=12; }

				curstate = (jp_directions>>dir_shift) & 15;
				curstate |= ((jp_fires>>fire_shift) & 1)<<4;

				if (curstate != prevstate) {
					hatstate = SDL_HAT_CENTERED;
					if (curstate & PORT_JS_LEFT) {
						hatstate |= SDL_HAT_LEFT;
					}
					if (curstate & PORT_JS_RIGHT) {
						hatstate |= SDL_HAT_RIGHT;
					}
					if (curstate & PORT_JS_UP) {
						hatstate |= SDL_HAT_UP;
					}
					if (curstate & PORT_JS_DOWN) {
						hatstate |= SDL_HAT_DOWN;
					}
					SDL_PrivateJoystickHat(joystick, 0, hatstate);

					/* Button */
					if ((curstate & PORT_JS_FIRE) && !(prevstate & PORT_JS_FIRE)) {
						SDL_PrivateJoystickButton(joystick,0,SDL_PRESSED);
					}
					if (!(curstate & PORT_JS_FIRE) && (prevstate & PORT_JS_FIRE)) {
						SDL_PrivateJoystickButton(joystick,0,SDL_RELEASED);
					}
				}
				atarijoysticks[numjoystick].prevstate = curstate;
			}
			break;
		case PORTA_LP:
			{
				int i;

				curstate = jp_lightpens[0]>>1;
				curstate |= (jp_lightpens[1]>>1)<<15;
				curstate |= (jp_fires & 3)<<30;

				if (curstate != prevstate) {
					/* X axis */
					SDL_PrivateJoystickAxis(joystick,0,jp_lightpens[0] ^ 0x8000);
					/* Y axis */
					SDL_PrivateJoystickAxis(joystick,1,jp_lightpens[1] ^ 0x8000);
					/* Buttons */
					for (i=0;i<2;i++) {
						int button;
						
						button=1<<(30+i);

						if ((curstate & button) && !(prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_PRESSED);
						}
						if (!(curstate & button) && (prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_RELEASED);
						}
					}
				}
				atarijoysticks[numjoystick].prevstate = curstate;
			}
			break;
		case PORTA_ANPAD:
		case PORTB_ANPAD:
			{
				int numpaddle, i;
				
				numpaddle=0<<1;
				if (numjoystick==PORTB_ANPAD) numpaddle=1<<1;

				curstate = jp_paddles[numpaddle]>>1;
				curstate |= (jp_paddles[numpaddle+1]>>1)<<15;
				curstate |= ((jp_fires>>numpaddle) & 3)<<30;

				if (curstate != prevstate) {
					/* X axis */
					SDL_PrivateJoystickAxis(joystick,0,jp_paddles[numpaddle] ^ 0x8000);
					/* Y axis */
					SDL_PrivateJoystickAxis(joystick,1,jp_paddles[numpaddle+1] ^ 0x8000);
					/* Buttons */
					for (i=0;i<2;i++) {
						int button;
						
						button=1<<(30+i);

						if ((curstate & button) && !(prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_PRESSED);
						}
						if (!(curstate & button) && (prevstate & button)) {
							SDL_PrivateJoystickButton(joystick,i,SDL_RELEASED);
						}
					}
				}
				atarijoysticks[numjoystick].prevstate = curstate;
			}
			break;
#if 0
		case PARA_JOY0:
		case PARA_JOY1:
			break;
#endif
	};

	return;
}

void SDL_SYS_JoystickClose(SDL_Joystick *joystick)
{
	return;
}

void SDL_SYS_JoystickQuit(void)
{
	SDL_numjoysticks=0;
	return;
}

/*--- Joypad I/O read/write interface ---*/

#define JOYPAD_IO_BASE (0xffff9200)
struct JOYPAD_IO_S {
	Uint16 fires;
	Uint16 directions;
	Uint16 dummy1[6];
	Uint16 paddles[4];
	Uint16 dummy2[4];
	Uint16 lightpens[2];
};
#define JOYPAD_IO ((*(volatile struct JOYPAD_IO_S *)JOYPAD_IO_BASE))

static void UpdateJoypads(void)
{
	Uint16 tmp;

	/*--- This function is called in supervisor mode ---*/

	/* Update joysticks */
	jp_fires = (~(JOYPAD_IO.fires)) & 15;
	jp_directions = (~(JOYPAD_IO.directions));
	
	/* Update lightpen */
	tmp = JOYPAD_IO.lightpens[0] & 1023;
	jp_lightpens[0] = (tmp<<6) | (tmp>>4);
	tmp = JOYPAD_IO.lightpens[1] & 1023;
	jp_lightpens[1] = (tmp<<6) | (tmp>>4);
	
	/* Update paddles */
	tmp = (JOYPAD_IO.paddles[0] & 255);
	jp_paddles[0] = (tmp<<8) | tmp;
	tmp = (JOYPAD_IO.paddles[1] & 255);
	jp_paddles[1] = (tmp<<8) | tmp;
	tmp = (JOYPAD_IO.paddles[2] & 255);
	jp_paddles[2] = (tmp<<8) | tmp;
	tmp = (JOYPAD_IO.paddles[3] & 255);
	jp_paddles[3] = (tmp<<8) | tmp;

	/* Update joypad 0 */	
	JOYPAD_IO.directions=0xfffe;
	jp_joypads[0]=((~(JOYPAD_IO.fires)) & 3)<<(16);
	JOYPAD_IO.directions=0xfffe;
	jp_joypads[0] |= ((~(JOYPAD_IO.directions))>>8) & 15;

	JOYPAD_IO.directions=0xfffd;
	jp_joypads[0] |= ((~(JOYPAD_IO.fires)) & 3)<<(16+2);
	JOYPAD_IO.directions=0xfffd;
	jp_joypads[0] |= (((~(JOYPAD_IO.directions))>>8) & 15)<<4;

	JOYPAD_IO.directions=0xfffb;
	jp_joypads[0] |= ((~(JOYPAD_IO.fires)) & 3)<<(16+4);
	JOYPAD_IO.directions=0xfffb;
	jp_joypads[0] |= (((~(JOYPAD_IO.directions))>>8) & 15)<<8;

	JOYPAD_IO.directions=0xfff7;
	jp_joypads[0] |= ((~(JOYPAD_IO.fires)) & 3)<<(16+6);
	JOYPAD_IO.directions=0xfff7;
	jp_joypads[0] |= (((~(JOYPAD_IO.directions))>>8) & 15)<<12;

	/* Update joypad 1 */	
	JOYPAD_IO.directions=0xffef;
	jp_joypads[1]=((~(JOYPAD_IO.fires)) & (3<<2))<<(16-2);
	JOYPAD_IO.directions=0xffef;
	jp_joypads[1] |= ((~(JOYPAD_IO.directions))>>12) & 15;

	JOYPAD_IO.directions=0xffdf;
	jp_joypads[1] |= ((~(JOYPAD_IO.fires)) & (3<<2))<<(16);
	JOYPAD_IO.directions=0xffdf;
	jp_joypads[1] |= (((~(JOYPAD_IO.directions))>>12) & 15)<<4;

	JOYPAD_IO.directions=0xffbf;
	jp_joypads[1] |= ((~(JOYPAD_IO.fires)) & (3<<2))<<(16+2);
	JOYPAD_IO.directions=0xffbf;
	jp_joypads[1] |= (((~(JOYPAD_IO.directions))>>12) & 15)<<8;

	JOYPAD_IO.directions=0xff7f;
	jp_joypads[1] |= ((~(JOYPAD_IO.fires)) & (3<<2))<<(16+4);
	JOYPAD_IO.directions=0xff7f;
	jp_joypads[1] |= (((~(JOYPAD_IO.directions))>>12) & 15)<<12;
}