Mercurial > sdl-ios-xcode
view src/audio/SDL_audiodev.c @ 1192:54aa9aa32327
To: sdl@libsdl.org
From: Christian Walther <cwalther@gmx.ch>
Date: Fri, 18 Nov 2005 23:39:02 +0100
Subject: [SDL] Mouse position bugs on Mac OS X
The attached patch fixes a few bugs in SDL related to the mouse position
in windowed mode on Mac OS X, reproduced using the attached minimal test
program - at least here on 10.3.9, with SDL CVS from today. Could anyone
test whether the bugs exist and are fixed by the patch on 10.2 and 10.4?
1. When using OpenGL, the vertical mouse positions obtained through
events or SDL_GetMouseState() are off by one.
2. When using OpenGL, SDL_WarpMouse() inverts the y coordinate.
3. Clicks on the topmost pixel row of the window are not recognized.
1 and 2 do not occur in non-OpenGL mode, while 3 does. All three only
occur in windowed mode, not in fullscreen.
The cause for 1 and 3 is that in Cocoa, "the location of the mouse"
seems to be defined as "the location of the top left corner of the mouse
pointer's hot pixel" (this is not documented, it's just what I found out
here), which together with the fact that Cocoa's usual y coordinates
start at the bottom and increase upwards means that the y coordinate of
the mouse runs from 1 to h, not from 0 to h-1, in a window of height h.
If it does work on 10.2 and 10.4 (I'll try to test it as soon as I can,
but at the moment all I have at hand is 10.3.9), can this be applied to
the CVS?
-Christian
To: sdl@libsdl.org
From: Christian Walther <cwalther@gmx.ch>
Date: Mon, 28 Nov 2005 10:41:51 +0100
Subject: [SDL] Re: Mouse position bugs on Mac OS X
I wrote:
> I'll try to test it as soon as I can, but at the moment all I have at hand is 10.3.9
So, here are the results of my tests (with patched and unpatched
frameworks compiled with Xcode 1.5 (gcc 3.3) on 10.3.9):
On 10.1.5, my test program doesn't run because of "Undefined symbols:
SDL undefined reference to _CGMainDisplayID expected to be defined in
Carbon". I guess not supporting 10.1 was a deliberate decision then and
that's OK with me.
On 10.2.8, 10.3.9, and 10.4.0, the bugs exist as described in my
original post and are fixed by my patch. That is, there is no difference
between pre/post 10.3 and the patched version works correctly in all
combinations of GL/non-GL and windowed/fullscreen.
I therefore recommend the patch for inclusion.
-Christian
author | Ryan C. Gordon <icculus@icculus.org> |
---|---|
date | Mon, 28 Nov 2005 13:58:26 +0000 |
parents | fcfb783a3ca2 |
children | c9b51268668f |
line wrap: on
line source
/* SDL - Simple DirectMedia Layer Copyright (C) 1997-2004 Sam Lantinga This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this library; if not, write to the Free Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Sam Lantinga slouken@libsdl.org */ #ifdef SAVE_RCSID static char rcsid = "@(#) $Id$"; #endif /* Get the name of the audio device we use for output */ #if defined(unix) || defined(__unix__) || defined(__riscos__) #include <stdlib.h> #include <stdio.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <string.h> #include "SDL_audiodev_c.h" #ifndef _PATH_DEV_DSP #if defined(__NetBSD__) || defined(__OpenBSD__) #define _PATH_DEV_DSP "/dev/audio" #else #define _PATH_DEV_DSP "/dev/dsp" #endif #endif #ifndef _PATH_DEV_DSP24 #define _PATH_DEV_DSP24 "/dev/sound/dsp" #endif #ifndef _PATH_DEV_AUDIO #define _PATH_DEV_AUDIO "/dev/audio" #endif int SDL_OpenAudioPath(char *path, int maxlen, int flags, int classic) { const char *audiodev; int audio_fd; char audiopath[1024]; /* Figure out what our audio device is */ if ( ((audiodev=getenv("SDL_PATH_DSP")) == NULL) && ((audiodev=getenv("AUDIODEV")) == NULL) ) { if ( classic ) { audiodev = _PATH_DEV_AUDIO; } else { struct stat sb; /* Added support for /dev/sound/\* in Linux 2.4 */ if ( ((stat("/dev/sound", &sb) == 0) && S_ISDIR(sb.st_mode)) && ((stat(_PATH_DEV_DSP24, &sb) == 0) && S_ISCHR(sb.st_mode)) ) { audiodev = _PATH_DEV_DSP24; } else { audiodev = _PATH_DEV_DSP; } } } audio_fd = open(audiodev, flags, 0); /* If the first open fails, look for other devices */ if ( (audio_fd < 0) && (strlen(audiodev) < (sizeof(audiopath)-3)) ) { int exists, instance; struct stat sb; instance = 1; do { /* Don't use errno ENOENT - it may not be thread-safe */ sprintf(audiopath, "%s%d", audiodev, instance++); exists = 0; if ( stat(audiopath, &sb) == 0 ) { exists = 1; audio_fd = open(audiopath, flags, 0); } } while ( exists && (audio_fd < 0) ); audiodev = audiopath; } if ( path != NULL ) { strncpy(path, audiodev, maxlen); path[maxlen-1] = '\0'; } return(audio_fd); } #elif defined(_AIX) /* Get the name of the audio device we use for output */ #include <stdlib.h> #include <sys/types.h> #include <sys/stat.h> #include <string.h> #include "SDL_audiodev_c.h" #ifndef _PATH_DEV_DSP #define _PATH_DEV_DSP "/dev/%caud%c/%c" #endif char devsettings[][3] = { { 'p', '0', '1' }, { 'p', '0', '2' }, { 'p', '0', '3' }, { 'p', '0', '4' }, { 'p', '1', '1' }, { 'p', '1', '2' }, { 'p', '1', '3' }, { 'p', '1', '4' }, { 'p', '2', '1' }, { 'p', '2', '2' }, { 'p', '2', '3' }, { 'p', '2', '4' }, { 'p', '3', '1' }, { 'p', '3', '2' }, { 'p', '3', '3' }, { 'p', '3', '4' }, { 'b', '0', '1' }, { 'b', '0', '2' }, { 'b', '0', '3' }, { 'b', '0', '4' }, { 'b', '1', '1' }, { 'b', '1', '2' }, { 'b', '1', '3' }, { 'b', '1', '4' }, { 'b', '2', '1' }, { 'b', '2', '2' }, { 'b', '2', '3' }, { 'b', '2', '4' }, { 'b', '3', '1' }, { 'b', '3', '2' }, { 'b', '3', '3' }, { 'b', '3', '4' }, { '\0', '\0', '\0' } }; static int OpenUserDefinedDevice(char *path, int maxlen, int flags) { const char *audiodev; int audio_fd; /* Figure out what our audio device is */ if ((audiodev=getenv("SDL_PATH_DSP")) == NULL) { audiodev=getenv("AUDIODEV"); } if ( audiodev == NULL ) { return -1; } audio_fd = open(audiodev, flags, 0); if ( path != NULL ) { strncpy(path, audiodev, maxlen); path[maxlen-1] = '\0'; } return audio_fd; } int SDL_OpenAudioPath(char *path, int maxlen, int flags, int classic) { struct stat sb; int audio_fd; char audiopath[1024]; int cycle; audio_fd = OpenUserDefinedDevice(path,maxlen,flags); if ( audio_fd != -1 ) { return audio_fd; } cycle = 0; while( devsettings[cycle][0] != '\0' ) { sprintf( audiopath, _PATH_DEV_DSP, devsettings[cycle][0], devsettings[cycle][1], devsettings[cycle][2]); if ( stat(audiopath, &sb) == 0 ) { audio_fd = open(audiopath, flags, 0); if ( audio_fd > 0 ) { if ( path != NULL ) { strncpy( path, audiopath, maxlen ); path[maxlen-1] = '\0'; } return audio_fd; } } } return -1; } #endif /* UNIX system */