Mercurial > sdl-ios-xcode
view README.wscons @ 2268:4baee598306d
Date: Thu, 05 Jul 2007 14:02:33 -0700
From: Sam Lantinga
Subject: SDL 1.3 keyboard plan
After lots of discussion with Christian, this is what we came up with:
> So, to sum up...
> SDLK_* become the physical keys, starting at > (1<<21)
> We create a macro SDLK_INDEX(X)
> We have two functions SDL_GetLayoutKey(SDLKey) and SDL_GetKeyName()
> SDL_GetLayoutKey maps to UCS4 for printable characters, and SDLK* for
non-printable characters
> and does so based on the OS's current keyboard layout
> SDL_GetKeyName() handles both SDLK_* and UCS4, converting UCS4 to UTF-8 and
converting SDLK_* into our names, which are UTF-8 for printable characters.
> WASD folks use SDLK_*, and 'I' folks use SDL_GetLayoutKey(SDLK_*)
Here is the patch he came up with, and his e-mail about it:
Date: Fri, 17 Aug 2007 19:50:28 +0200
From: Christian Walther
Subject: Re: SDL 1.3 keyboard plan
> Sounds great, go ahead and send me a patch.
Here goes! Thanks for having a look. Don't hesitate to comment if
anything does not conform to your ideas.
One caveat: Committing this now may break compilability of some video
drivers - specifically, if they use any of the SDLK_* codes that were
obsoleted and moved into SDL_compat.h. I only tried Cocoa (which did
break, but is already fixed) and X11 (which didn't, but then its key
handling is #iffed out). If that's a problem, it may need to go into
a branch.
-Christian
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Sun, 19 Aug 2007 14:52:52 +0000 |
parents | 19d8949b4584 |
children |
line wrap: on
line source
============================================================================== Using the Simple DirectMedia Layer with OpenBSD/wscons ============================================================================== The wscons SDL driver can be used to run SDL programs on OpenBSD without running X. So far, the driver only runs on the Sharp Zaurus, but the driver is written to be easily extended for other machines. The main missing pieces are blitting routines for anything but 16 bit displays, and keycode maps for other keyboards. Also, there is no support for hardware palettes. There is currently no mouse support. To compile SDL with support for wscons, use the "--enable-video-wscons" option when running configure. I used the following command line: ./configure --disable-oss --disable-ltdl --enable-pthread-sem \ --disable-esd --disable-arts --disable-video-aalib \ --enable-openbsdaudio --enable-video-wscons \ --prefix=/usr/local --sysconfdir=/etc Setting the console device to use ================================= When starting an SDL program on a wscons console, the driver uses the current virtual terminal (usually /dev/ttyC0). To force the driver to use a specific terminal device, set the environment variable SDL_WSCONSDEV: bash$ SDL_WSCONSDEV=/dev/ttyC1 ./some-sdl-program This is especially useful when starting an SDL program from a remote login prompt (which is great for development). If you do this, and want to use keyboard input, you should avoid having some other program reading from the used virtual console (i.e., do not have a getty running). Rotating the display ==================== The display can be rotated by the wscons SDL driver. This is useful for the Sharp Zaurus, since the display hardware is wired so that it is correctly rotated only when the display is folded into "PDA mode." When using the Zaurus in "normal," or "keyboard" mode, the hardware screen is rotated 90 degrees anti-clockwise. To let the wscons SDL driver rotate the screen, set the environment variable SDL_VIDEO_WSCONS_ROTATION to "CW", "CCW", or "UD", for clockwise, counter clockwise, and upside-down rotation respectively. "CW" makes the screen appear correct on a Sharp Zaurus SL-C3100. When using rotation in the driver, a "shadow" frame buffer is used to hold the intermediary display, before blitting it to the actual hardware frame buffer. This slows down performance a bit. For completeness, the rotation "NONE" can be specified to use a shadow frame buffer without actually rotating. Unsetting SDL_VIDEO_WSCONS_ROTATION, or setting it to '' turns off the shadow frame buffer for maximum performance. Running MAME ============ Since my main motivation for writing the driver was playing MAME on the Zaurus, I'll give a few hints: XMame compiles just fine under OpenBSD. I'm not sure this is strictly necessary, but set MY_CPU = arm in makefile.unix, and CFLAGS.arm = -DLSB_FIRST -DALIGN_INTS -DALIGN_SHORTS in src/unix/unix.max to be sure. The latest XMame (0.101 at this writing) is a very large program. Either tinker with the make files to compile a version without support for all drivers, or, get an older version of XMame. My recommendation would be 0.37b16. When running MAME, DO NOT SET SDL_VIDEO_WSCONS_ROTATION! Performace is MUCH better without this, and it is COMPLETELY UNNECESSARY, since MAME can rotate the picture itself while drawing, and does so MUCH FASTER. Use the Xmame command line option "-ror" to rotate the picture to the right. Acknowledgments =============== I studied the wsfb driver for XFree86/Xorg quite a bit before writing this, so there ought to be some similarities. -- Staffan Ulfberg <staffan@ulfberg.se>