view src/audio/SDL_wave.c @ 942:41a59de7f2ed

Here are patches for SDL12 and SDL_mixer for 4 or 6 channel surround sound on Linux using the Alsa driver. To use them, naturally you need a sound card that will do 4 or 6 channels and probably also a recent version of the Alsa drivers and library. Since the only SDL output driver that knows about surround sound is the Alsa driver, you���ll want to choose it, using: export SDL_AUDIODRIVER=alsa There are no syntactic changes to the programming API. No new library calls, no differences in arguments. There are two semantic changes: (1) For library calls with number of channels as an argument, formerly you could use only 1 or 2 for the number of channels. Now you can also use 4 or 6. (2) The two "left" and "right" arguments to Mix_SetPanning, for the case of 4 or 6 channels, no longer simply control the volumes of the left and right channels. Now the "left" argument is converted to an angle and Mix_SetPosition is called, and the "right" argu- ment is ignored. With two exceptions, so far as I know, the modified SDL12 and SDL_mixer work the same way as the original versions, when opened for 1 or 2 channel output. The two exceptions are bugs which I fixed. Well, the first, anyway, is a bug for sure. When rate conversions up or down by a factor of two are applied (in src/audio/SDL_audiocvt.c), streams with different numbers of channels (that is, mono and stereo) are treated the same way: either each sample is copied or every other sample is omitted. This is ok for mono, but for stereo, it is frames that should be copied or omitted, where by "frame" I mean a portion of the stream containing one sample for each channel. (In the SDL source, confusingly, sometimes frames are called "samples".) So for these rate conversions, stereo streams have to be treated differently, and they are, in my modified version. The other problem that might be characterized as a bug arises when SDL_mixer is passed a multichannel chunk which does not have an integral number of frames. Due to the way the effect_position code loops over frames, when the chunk ends with a partial frame, memory outside the chunk buffer will be accessed. In the case of stereo, it���s possible that because malloc may give more memory than requested, this potential problem never actually causes a segment fault. I don���t know. For 6 channel chunks, I do know, and it does cause segment faults. If SDL_mixer is passed defective chunks and this causes a segment fault, arguably, that���s not a bug in SDL_mixer. Still, whether or not it counts as a bug, it���s easy to protect against, so why not? I added code in mixer.c to discard any partial frame at the end of a chunk. Then what about when SDL or SDL_mixer is opened for 4 or 6 chan- nel output? What happens with the parts of the current library designed for stereo? I don���t know whether I���ve covered all the bases, but I���ve tried: (1) For playing 2 channel waves, or other cases where SDL knows it has to match up a 2 channel source with a 4 or 6 channel output, I���ve added code in SDL_audiocvt.c to make the necessary conversions. (2) For playing midis using timidity, I���ve converted timidity to do 4 or 6 channel output, upon request. (3) For playing mods using mikmod, I put ad hoc code in music.c to convert the stereo output that mikmod produces to 4 or 6 chan- nels. Obviously it would be better to change the mikmod code to mix down into 4 or 6 channels, but I have a hard time following the code in mikmod, so I didn���t do that. (4) For playing mp3s, I put ad hoc code in smpeg to copy channels in the case when 4 or 6 channel output is needed. (5) There seems to be no problem with .ogg files - stereo .oggs can be up converted as .wavs are. (6) The effect_position code in SDL_mixer is now generalized to in- clude the cases of 4 and 6 channel streams. I���ve done a very limited amount of compatibility testing for some of the games using SDL I happen to have. For details, see the file TESTS. I���ve put into a separate archive, Surround-SDL-testfiles.tgz, a couple of 6 channel wave files for testing and a 6 channel ogg file. If you have the right hardware and version of Alsa, you should be able to play the wave files with the Alsa utility aplay (and hear all channels, except maybe lfe, for chan-id.wav, since it���s rather faint). Don���t expect aplay to give good sound, though. There���s something wrong with the current version of aplay. The canyon.ogg file is to test loading of 6 channel oggs. After patching and compiling, you can play it with playmus. (My version of ogg123 will not play it, and I had to patch mplayer to get it to play 6 channel oggs.) Greg Lee <greg@ling.lll.hawaii.edu> Thus, July 1, 2004
author Sam Lantinga <slouken@libsdl.org>
date Sat, 21 Aug 2004 12:27:02 +0000
parents b8d311d90021
children 80f8c94b5199
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2004 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License as published by the Free Software Foundation; either
    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.

    You should have received a copy of the GNU Library General Public
    License along with this library; if not, write to the Free
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

    Sam Lantinga
    slouken@libsdl.org
*/

#ifdef SAVE_RCSID
static char rcsid =
 "@(#) $Id$";
#endif

#ifndef DISABLE_FILE

/* Microsoft WAVE file loading routines */

#include <stdlib.h>
#include <string.h>

#include "SDL_error.h"
#include "SDL_audio.h"
#include "SDL_wave.h"
#include "SDL_endian.h"

#ifndef NELEMS
#define NELEMS(array)	((sizeof array)/(sizeof array[0]))
#endif

static int ReadChunk(SDL_RWops *src, Chunk *chunk);

struct MS_ADPCM_decodestate {
	Uint8 hPredictor;
	Uint16 iDelta;
	Sint16 iSamp1;
	Sint16 iSamp2;
};
static struct MS_ADPCM_decoder {
	WaveFMT wavefmt;
	Uint16 wSamplesPerBlock;
	Uint16 wNumCoef;
	Sint16 aCoeff[7][2];
	/* * * */
	struct MS_ADPCM_decodestate state[2];
} MS_ADPCM_state;

static int InitMS_ADPCM(WaveFMT *format)
{
	Uint8 *rogue_feel;
	Uint16 extra_info;
	int i;

	/* Set the rogue pointer to the MS_ADPCM specific data */
	MS_ADPCM_state.wavefmt.encoding = SDL_SwapLE16(format->encoding);
	MS_ADPCM_state.wavefmt.channels = SDL_SwapLE16(format->channels);
	MS_ADPCM_state.wavefmt.frequency = SDL_SwapLE32(format->frequency);
	MS_ADPCM_state.wavefmt.byterate = SDL_SwapLE32(format->byterate);
	MS_ADPCM_state.wavefmt.blockalign = SDL_SwapLE16(format->blockalign);
	MS_ADPCM_state.wavefmt.bitspersample =
					 SDL_SwapLE16(format->bitspersample);
	rogue_feel = (Uint8 *)format+sizeof(*format);
	if ( sizeof(*format) == 16 ) {
		extra_info = ((rogue_feel[1]<<8)|rogue_feel[0]);
		rogue_feel += sizeof(Uint16);
	}
	MS_ADPCM_state.wSamplesPerBlock = ((rogue_feel[1]<<8)|rogue_feel[0]);
	rogue_feel += sizeof(Uint16);
	MS_ADPCM_state.wNumCoef = ((rogue_feel[1]<<8)|rogue_feel[0]);
	rogue_feel += sizeof(Uint16);
	if ( MS_ADPCM_state.wNumCoef != 7 ) {
		SDL_SetError("Unknown set of MS_ADPCM coefficients");
		return(-1);
	}
	for ( i=0; i<MS_ADPCM_state.wNumCoef; ++i ) {
		MS_ADPCM_state.aCoeff[i][0] = ((rogue_feel[1]<<8)|rogue_feel[0]);
		rogue_feel += sizeof(Uint16);
		MS_ADPCM_state.aCoeff[i][1] = ((rogue_feel[1]<<8)|rogue_feel[0]);
		rogue_feel += sizeof(Uint16);
	}
	return(0);
}

static Sint32 MS_ADPCM_nibble(struct MS_ADPCM_decodestate *state,
					Uint8 nybble, Sint16 *coeff)
{
	const Sint32 max_audioval = ((1<<(16-1))-1);
	const Sint32 min_audioval = -(1<<(16-1));
	const Sint32 adaptive[] = {
		230, 230, 230, 230, 307, 409, 512, 614,
		768, 614, 512, 409, 307, 230, 230, 230
	};
	Sint32 new_sample, delta;

	new_sample = ((state->iSamp1 * coeff[0]) +
		      (state->iSamp2 * coeff[1]))/256;
	if ( nybble & 0x08 ) {
		new_sample += state->iDelta * (nybble-0x10);
	} else {
		new_sample += state->iDelta * nybble;
	}
	if ( new_sample < min_audioval ) {
		new_sample = min_audioval;
	} else
	if ( new_sample > max_audioval ) {
		new_sample = max_audioval;
	}
	delta = ((Sint32)state->iDelta * adaptive[nybble])/256;
	if ( delta < 16 ) {
		delta = 16;
	}
	state->iDelta = delta;
	state->iSamp2 = state->iSamp1;
	state->iSamp1 = new_sample;
	return(new_sample);
}

static int MS_ADPCM_decode(Uint8 **audio_buf, Uint32 *audio_len)
{
	struct MS_ADPCM_decodestate *state[2];
	Uint8 *freeable, *encoded, *decoded;
	Sint32 encoded_len, samplesleft;
	Sint8 nybble, stereo;
	Sint16 *coeff[2];
	Sint32 new_sample;

	/* Allocate the proper sized output buffer */
	encoded_len = *audio_len;
	encoded = *audio_buf;
	freeable = *audio_buf;
	*audio_len = (encoded_len/MS_ADPCM_state.wavefmt.blockalign) * 
				MS_ADPCM_state.wSamplesPerBlock*
				MS_ADPCM_state.wavefmt.channels*sizeof(Sint16);
	*audio_buf = (Uint8 *)malloc(*audio_len);
	if ( *audio_buf == NULL ) {
		SDL_Error(SDL_ENOMEM);
		return(-1);
	}
	decoded = *audio_buf;

	/* Get ready... Go! */
	stereo = (MS_ADPCM_state.wavefmt.channels == 2);
	state[0] = &MS_ADPCM_state.state[0];
	state[1] = &MS_ADPCM_state.state[stereo];
	while ( encoded_len >= MS_ADPCM_state.wavefmt.blockalign ) {
		/* Grab the initial information for this block */
		state[0]->hPredictor = *encoded++;
		if ( stereo ) {
			state[1]->hPredictor = *encoded++;
		}
		state[0]->iDelta = ((encoded[1]<<8)|encoded[0]);
		encoded += sizeof(Sint16);
		if ( stereo ) {
			state[1]->iDelta = ((encoded[1]<<8)|encoded[0]);
			encoded += sizeof(Sint16);
		}
		state[0]->iSamp1 = ((encoded[1]<<8)|encoded[0]);
		encoded += sizeof(Sint16);
		if ( stereo ) {
			state[1]->iSamp1 = ((encoded[1]<<8)|encoded[0]);
			encoded += sizeof(Sint16);
		}
		state[0]->iSamp2 = ((encoded[1]<<8)|encoded[0]);
		encoded += sizeof(Sint16);
		if ( stereo ) {
			state[1]->iSamp2 = ((encoded[1]<<8)|encoded[0]);
			encoded += sizeof(Sint16);
		}
		coeff[0] = MS_ADPCM_state.aCoeff[state[0]->hPredictor];
		coeff[1] = MS_ADPCM_state.aCoeff[state[1]->hPredictor];

		/* Store the two initial samples we start with */
		decoded[0] = state[0]->iSamp2&0xFF;
		decoded[1] = state[0]->iSamp2>>8;
		decoded += 2;
		if ( stereo ) {
			decoded[0] = state[1]->iSamp2&0xFF;
			decoded[1] = state[1]->iSamp2>>8;
			decoded += 2;
		}
		decoded[0] = state[0]->iSamp1&0xFF;
		decoded[1] = state[0]->iSamp1>>8;
		decoded += 2;
		if ( stereo ) {
			decoded[0] = state[1]->iSamp1&0xFF;
			decoded[1] = state[1]->iSamp1>>8;
			decoded += 2;
		}

		/* Decode and store the other samples in this block */
		samplesleft = (MS_ADPCM_state.wSamplesPerBlock-2)*
					MS_ADPCM_state.wavefmt.channels;
		while ( samplesleft > 0 ) {
			nybble = (*encoded)>>4;
			new_sample = MS_ADPCM_nibble(state[0],nybble,coeff[0]);
			decoded[0] = new_sample&0xFF;
			new_sample >>= 8;
			decoded[1] = new_sample&0xFF;
			decoded += 2;

			nybble = (*encoded)&0x0F;
			new_sample = MS_ADPCM_nibble(state[1],nybble,coeff[1]);
			decoded[0] = new_sample&0xFF;
			new_sample >>= 8;
			decoded[1] = new_sample&0xFF;
			decoded += 2;

			++encoded;
			samplesleft -= 2;
		}
		encoded_len -= MS_ADPCM_state.wavefmt.blockalign;
	}
	free(freeable);
	return(0);
}

struct IMA_ADPCM_decodestate {
	Sint32 sample;
	Sint8 index;
};
static struct IMA_ADPCM_decoder {
	WaveFMT wavefmt;
	Uint16 wSamplesPerBlock;
	/* * * */
	struct IMA_ADPCM_decodestate state[2];
} IMA_ADPCM_state;

static int InitIMA_ADPCM(WaveFMT *format)
{
	Uint8 *rogue_feel;
	Uint16 extra_info;

	/* Set the rogue pointer to the IMA_ADPCM specific data */
	IMA_ADPCM_state.wavefmt.encoding = SDL_SwapLE16(format->encoding);
	IMA_ADPCM_state.wavefmt.channels = SDL_SwapLE16(format->channels);
	IMA_ADPCM_state.wavefmt.frequency = SDL_SwapLE32(format->frequency);
	IMA_ADPCM_state.wavefmt.byterate = SDL_SwapLE32(format->byterate);
	IMA_ADPCM_state.wavefmt.blockalign = SDL_SwapLE16(format->blockalign);
	IMA_ADPCM_state.wavefmt.bitspersample =
					 SDL_SwapLE16(format->bitspersample);
	rogue_feel = (Uint8 *)format+sizeof(*format);
	if ( sizeof(*format) == 16 ) {
		extra_info = ((rogue_feel[1]<<8)|rogue_feel[0]);
		rogue_feel += sizeof(Uint16);
	}
	IMA_ADPCM_state.wSamplesPerBlock = ((rogue_feel[1]<<8)|rogue_feel[0]);
	return(0);
}

static Sint32 IMA_ADPCM_nibble(struct IMA_ADPCM_decodestate *state,Uint8 nybble)
{
	const Sint32 max_audioval = ((1<<(16-1))-1);
	const Sint32 min_audioval = -(1<<(16-1));
	const int index_table[16] = {
		-1, -1, -1, -1,
		 2,  4,  6,  8,
		-1, -1, -1, -1,
		 2,  4,  6,  8
	};
	const Sint32 step_table[89] = {
		7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 19, 21, 23, 25, 28, 31,
		34, 37, 41, 45, 50, 55, 60, 66, 73, 80, 88, 97, 107, 118, 130,
		143, 157, 173, 190, 209, 230, 253, 279, 307, 337, 371, 408,
		449, 494, 544, 598, 658, 724, 796, 876, 963, 1060, 1166, 1282,
		1411, 1552, 1707, 1878, 2066, 2272, 2499, 2749, 3024, 3327,
		3660, 4026, 4428, 4871, 5358, 5894, 6484, 7132, 7845, 8630,
		9493, 10442, 11487, 12635, 13899, 15289, 16818, 18500, 20350,
		22385, 24623, 27086, 29794, 32767
	};
	Sint32 delta, step;

	/* Compute difference and new sample value */
	step = step_table[state->index];
	delta = step >> 3;
	if ( nybble & 0x04 ) delta += step;
	if ( nybble & 0x02 ) delta += (step >> 1);
	if ( nybble & 0x01 ) delta += (step >> 2);
	if ( nybble & 0x08 ) delta = -delta;
	state->sample += delta;

	/* Update index value */
	state->index += index_table[nybble];
	if ( state->index > 88 ) {
		state->index = 88;
	} else
	if ( state->index < 0 ) {
		state->index = 0;
	}

	/* Clamp output sample */
	if ( state->sample > max_audioval ) {
		state->sample = max_audioval;
	} else
	if ( state->sample < min_audioval ) {
		state->sample = min_audioval;
	}
	return(state->sample);
}

/* Fill the decode buffer with a channel block of data (8 samples) */
static void Fill_IMA_ADPCM_block(Uint8 *decoded, Uint8 *encoded,
	int channel, int numchannels, struct IMA_ADPCM_decodestate *state)
{
	int i;
	Sint8 nybble;
	Sint32 new_sample;

	decoded += (channel * 2);
	for ( i=0; i<4; ++i ) {
		nybble = (*encoded)&0x0F;
		new_sample = IMA_ADPCM_nibble(state, nybble);
		decoded[0] = new_sample&0xFF;
		new_sample >>= 8;
		decoded[1] = new_sample&0xFF;
		decoded += 2 * numchannels;

		nybble = (*encoded)>>4;
		new_sample = IMA_ADPCM_nibble(state, nybble);
		decoded[0] = new_sample&0xFF;
		new_sample >>= 8;
		decoded[1] = new_sample&0xFF;
		decoded += 2 * numchannels;

		++encoded;
	}
}

static int IMA_ADPCM_decode(Uint8 **audio_buf, Uint32 *audio_len)
{
	struct IMA_ADPCM_decodestate *state;
	Uint8 *freeable, *encoded, *decoded;
	Sint32 encoded_len, samplesleft;
	int c, channels;

	/* Check to make sure we have enough variables in the state array */
	channels = IMA_ADPCM_state.wavefmt.channels;
	if ( channels > NELEMS(IMA_ADPCM_state.state) ) {
		SDL_SetError("IMA ADPCM decoder can only handle %d channels",
						NELEMS(IMA_ADPCM_state.state));
		return(-1);
	}
	state = IMA_ADPCM_state.state;

	/* Allocate the proper sized output buffer */
	encoded_len = *audio_len;
	encoded = *audio_buf;
	freeable = *audio_buf;
	*audio_len = (encoded_len/IMA_ADPCM_state.wavefmt.blockalign) * 
				IMA_ADPCM_state.wSamplesPerBlock*
				IMA_ADPCM_state.wavefmt.channels*sizeof(Sint16);
	*audio_buf = (Uint8 *)malloc(*audio_len);
	if ( *audio_buf == NULL ) {
		SDL_Error(SDL_ENOMEM);
		return(-1);
	}
	decoded = *audio_buf;

	/* Get ready... Go! */
	while ( encoded_len >= IMA_ADPCM_state.wavefmt.blockalign ) {
		/* Grab the initial information for this block */
		for ( c=0; c<channels; ++c ) {
			/* Fill the state information for this block */
			state[c].sample = ((encoded[1]<<8)|encoded[0]);
			encoded += 2;
			if ( state[c].sample & 0x8000 ) {
				state[c].sample -= 0x10000;
			}
			state[c].index = *encoded++;
			/* Reserved byte in buffer header, should be 0 */
			if ( *encoded++ != 0 ) {
				/* Uh oh, corrupt data?  Buggy code? */;
			}

			/* Store the initial sample we start with */
			decoded[0] = state[c].sample&0xFF;
			decoded[1] = state[c].sample>>8;
			decoded += 2;
		}

		/* Decode and store the other samples in this block */
		samplesleft = (IMA_ADPCM_state.wSamplesPerBlock-1)*channels;
		while ( samplesleft > 0 ) {
			for ( c=0; c<channels; ++c ) {
				Fill_IMA_ADPCM_block(decoded, encoded,
						c, channels, &state[c]);
				encoded += 4;
				samplesleft -= 8;
			}
			decoded += (channels * 8 * 2);
		}
		encoded_len -= IMA_ADPCM_state.wavefmt.blockalign;
	}
	free(freeable);
	return(0);
}

SDL_AudioSpec * SDL_LoadWAV_RW (SDL_RWops *src, int freesrc,
		SDL_AudioSpec *spec, Uint8 **audio_buf, Uint32 *audio_len)
{
	int was_error;
	Chunk chunk;
	int lenread;
	int MS_ADPCM_encoded, IMA_ADPCM_encoded;
	int samplesize;

	/* WAV magic header */
	Uint32 RIFFchunk;
	Uint32 wavelen;
	Uint32 WAVEmagic;

	/* FMT chunk */
	WaveFMT *format = NULL;

	/* Make sure we are passed a valid data source */
	was_error = 0;
	if ( src == NULL ) {
		was_error = 1;
		goto done;
	}
		
	/* Check the magic header */
	RIFFchunk	= SDL_ReadLE32(src);
	wavelen		= SDL_ReadLE32(src);
	if ( wavelen == WAVE ) { /* The RIFFchunk has already been read */
		WAVEmagic = wavelen;
		wavelen   = RIFFchunk;
		RIFFchunk = RIFF;
	} else {
		WAVEmagic = SDL_ReadLE32(src);
	}
	if ( (RIFFchunk != RIFF) || (WAVEmagic != WAVE) ) {
		SDL_SetError("Unrecognized file type (not WAVE)");
		was_error = 1;
		goto done;
	}

	/* Read the audio data format chunk */
	chunk.data = NULL;
	do {
		if ( chunk.data != NULL ) {
			free(chunk.data);
		}
		lenread = ReadChunk(src, &chunk);
		if ( lenread < 0 ) {
			was_error = 1;
			goto done;
		}
	} while ( (chunk.magic == FACT) || (chunk.magic == LIST) );

	/* Decode the audio data format */
	format = (WaveFMT *)chunk.data;
	if ( chunk.magic != FMT ) {
		SDL_SetError("Complex WAVE files not supported");
		was_error = 1;
		goto done;
	}
	MS_ADPCM_encoded = IMA_ADPCM_encoded = 0;
	switch (SDL_SwapLE16(format->encoding)) {
		case PCM_CODE:
			/* We can understand this */
			break;
		case MS_ADPCM_CODE:
			/* Try to understand this */
			if ( InitMS_ADPCM(format) < 0 ) {
				was_error = 1;
				goto done;
			}
			MS_ADPCM_encoded = 1;
			break;
		case IMA_ADPCM_CODE:
			/* Try to understand this */
			if ( InitIMA_ADPCM(format) < 0 ) {
				was_error = 1;
				goto done;
			}
			IMA_ADPCM_encoded = 1;
			break;
		default:
			SDL_SetError("Unknown WAVE data format: 0x%.4x",
					SDL_SwapLE16(format->encoding));
			was_error = 1;
			goto done;
	}
	memset(spec, 0, (sizeof *spec));
	spec->freq = SDL_SwapLE32(format->frequency);
	switch (SDL_SwapLE16(format->bitspersample)) {
		case 4:
			if ( MS_ADPCM_encoded || IMA_ADPCM_encoded ) {
				spec->format = AUDIO_S16;
			} else {
				was_error = 1;
			}
			break;
		case 8:
			spec->format = AUDIO_U8;
			break;
		case 16:
			spec->format = AUDIO_S16;
			break;
		default:
			was_error = 1;
			break;
	}
	if ( was_error ) {
		SDL_SetError("Unknown %d-bit PCM data format",
			SDL_SwapLE16(format->bitspersample));
		goto done;
	}
	spec->channels = (Uint8)SDL_SwapLE16(format->channels);
	spec->samples = 4096;		/* Good default buffer size */

	/* Read the audio data chunk */
	*audio_buf = NULL;
	do {
		if ( *audio_buf != NULL ) {
			free(*audio_buf);
		}
		lenread = ReadChunk(src, &chunk);
		if ( lenread < 0 ) {
			was_error = 1;
			goto done;
		}
		*audio_len = lenread;
		*audio_buf = chunk.data;
	} while ( chunk.magic != DATA );

	if ( MS_ADPCM_encoded ) {
		if ( MS_ADPCM_decode(audio_buf, audio_len) < 0 ) {
			was_error = 1;
			goto done;
		}
	}
	if ( IMA_ADPCM_encoded ) {
		if ( IMA_ADPCM_decode(audio_buf, audio_len) < 0 ) {
			was_error = 1;
			goto done;
		}
	}

	/* Don't return a buffer that isn't a multiple of samplesize */
	samplesize = ((spec->format & 0xFF)/8)*spec->channels;
	*audio_len &= ~(samplesize-1);

done:
	if ( format != NULL ) {
		free(format);
	}
	if ( freesrc && src ) {
		SDL_RWclose(src);
	}
	if ( was_error ) {
		spec = NULL;
	}
	return(spec);
}

/* Since the WAV memory is allocated in the shared library, it must also
   be freed here.  (Necessary under Win32, VC++)
 */
void SDL_FreeWAV(Uint8 *audio_buf)
{
	if ( audio_buf != NULL ) {
		free(audio_buf);
	}
}

static int ReadChunk(SDL_RWops *src, Chunk *chunk)
{
	chunk->magic	= SDL_ReadLE32(src);
	chunk->length	= SDL_ReadLE32(src);
	chunk->data = (Uint8 *)malloc(chunk->length);
	if ( chunk->data == NULL ) {
		SDL_Error(SDL_ENOMEM);
		return(-1);
	}
	if ( SDL_RWread(src, chunk->data, chunk->length, 1) != 1 ) {
		SDL_Error(SDL_EFREAD);
		free(chunk->data);
		return(-1);
	}
	return(chunk->length);
}

#endif /* ENABLE_FILE */