view src/audio/dsp/SDL_dspaudio.c @ 1982:3b4ce57c6215

First shot at new audio data types (int32 and float32). Notable changes: - Converters between types are autogenerated. Instead of making multiple passes over the data with seperate filters for endianess, size, signedness, etc, converting between data types is always one specialized filter. This simplifies SDL_BuildAudioCVT(), which otherwise had a million edge cases with the new types, and makes the actually conversions more CPU cache friendly. Left a stub for adding specific optimized versions of these routines (SSE/MMX/Altivec, assembler, etc) - Autogenerated converters are built by SDL/src/audio/sdlgenaudiocvt.pl. This does not need to be run unless tweaking the code, and thus doesn't need integration into the build system. - Went through all the drivers and tried to weed out all the "Uint16" references that are better specified with the new SDL_AudioFormat typedef. - Cleaned out a bunch of hardcoded bitwise magic numbers and replaced them with new SDL_AUDIO_* macros. - Added initial float32 and int32 support code. Theoretically, existing drivers will push these through converters to get the data they want to feed to the hardware. Still TODO: - Optimize and debug new converters. - Update the CoreAudio backend to accept float32 data directly. - Other backends, too? - SDL_LoadWAV() needs to be updated to support int32 and float32 .wav files (both of which exist and can be generated by 'sox' for testing purposes). - Update the mixer to handle new datatypes. - Optionally update SDL_sound and SDL_mixer, etc.
author Ryan C. Gordon <icculus@icculus.org>
date Thu, 24 Aug 2006 12:10:46 +0000
parents c121d94672cb
children 5f6550e5184f 589bc3d060cd
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org

    Modified in Oct 2004 by Hannu Savolainen 
    hannu@opensound.com
*/
#include "SDL_config.h"

/* Allow access to a raw mixing buffer */

#include <stdio.h>              /* For perror() */
#include <string.h>             /* For strerror() */
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/stat.h>

#if SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H
/* This is installed on some systems */
#include <soundcard.h>
#else
/* This is recommended by OSS */
#include <sys/soundcard.h>
#endif

#include "SDL_timer.h"
#include "SDL_audio.h"
#include "../SDL_audiomem.h"
#include "../SDL_audio_c.h"
#include "../SDL_audiodev_c.h"
#include "SDL_dspaudio.h"

/* The tag name used by DSP audio */
#define DSP_DRIVER_NAME         "dsp"

/* Open the audio device for playback, and don't block if busy */
#define OPEN_FLAGS	(O_WRONLY|O_NONBLOCK)

/* Audio driver functions */
static int DSP_OpenAudio(_THIS, SDL_AudioSpec * spec);
static void DSP_WaitAudio(_THIS);
static void DSP_PlayAudio(_THIS);
static Uint8 *DSP_GetAudioBuf(_THIS);
static void DSP_CloseAudio(_THIS);

/* Audio driver bootstrap functions */

static int
Audio_Available(void)
{
    int fd;
    int available;

    available = 0;
    fd = SDL_OpenAudioPath(NULL, 0, OPEN_FLAGS, 0);
    if (fd >= 0) {
        available = 1;
        close(fd);
    }
    return (available);
}

static void
Audio_DeleteDevice(SDL_AudioDevice * device)
{
    SDL_free(device->hidden);
    SDL_free(device);
}

static SDL_AudioDevice *
Audio_CreateDevice(int devindex)
{
    SDL_AudioDevice *this;

    /* Initialize all variables that we clean on shutdown */
    this = (SDL_AudioDevice *) SDL_malloc(sizeof(SDL_AudioDevice));
    if (this) {
        SDL_memset(this, 0, (sizeof *this));
        this->hidden = (struct SDL_PrivateAudioData *)
            SDL_malloc((sizeof *this->hidden));
    }
    if ((this == NULL) || (this->hidden == NULL)) {
        SDL_OutOfMemory();
        if (this) {
            SDL_free(this);
        }
        return (0);
    }
    SDL_memset(this->hidden, 0, (sizeof *this->hidden));
    audio_fd = -1;

    /* Set the function pointers */
    this->OpenAudio = DSP_OpenAudio;
    this->WaitAudio = DSP_WaitAudio;
    this->PlayAudio = DSP_PlayAudio;
    this->GetAudioBuf = DSP_GetAudioBuf;
    this->CloseAudio = DSP_CloseAudio;

    this->free = Audio_DeleteDevice;

    return this;
}

AudioBootStrap DSP_bootstrap = {
    DSP_DRIVER_NAME, "OSS /dev/dsp standard audio",
    Audio_Available, Audio_CreateDevice
};

/* This function waits until it is possible to write a full sound buffer */
static void
DSP_WaitAudio(_THIS)
{
    /* Not needed at all since OSS handles waiting automagically */
}

static void
DSP_PlayAudio(_THIS)
{
    if (write(audio_fd, mixbuf, mixlen) == -1) {
        perror("Audio write");
        this->enabled = 0;
    }
#ifdef DEBUG_AUDIO
    fprintf(stderr, "Wrote %d bytes of audio data\n", mixlen);
#endif
}

static Uint8 *
DSP_GetAudioBuf(_THIS)
{
    return (mixbuf);
}

static void
DSP_CloseAudio(_THIS)
{
    if (mixbuf != NULL) {
        SDL_FreeAudioMem(mixbuf);
        mixbuf = NULL;
    }
    if (audio_fd >= 0) {
        close(audio_fd);
        audio_fd = -1;
    }
}

static int
DSP_OpenAudio(_THIS, SDL_AudioSpec * spec)
{
    char audiodev[1024];
    int format;
    int value;
    int frag_spec;
    SDL_AudioFormat test_format;

    /* Open the audio device */
    audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
    if (audio_fd < 0) {
        SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
        return (-1);
    }
    mixbuf = NULL;

    /* Make the file descriptor use blocking writes with fcntl() */
    {
        long flags;
        flags = fcntl(audio_fd, F_GETFL);
        flags &= ~O_NONBLOCK;
        if (fcntl(audio_fd, F_SETFL, flags) < 0) {
            SDL_SetError("Couldn't set audio blocking mode");
            DSP_CloseAudio(this);
            return (-1);
        }
    }

    /* Get a list of supported hardware formats */
    if (ioctl(audio_fd, SNDCTL_DSP_GETFMTS, &value) < 0) {
        perror("SNDCTL_DSP_GETFMTS");
        SDL_SetError("Couldn't get audio format list");
        DSP_CloseAudio(this);
        return (-1);
    }

    /* Try for a closest match on audio format */
    format = 0;
    for (test_format = SDL_FirstAudioFormat(spec->format);
         !format && test_format;) {
#ifdef DEBUG_AUDIO
        fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
        switch (test_format) {
        case AUDIO_U8:
            if (value & AFMT_U8) {
                format = AFMT_U8;
            }
            break;
        case AUDIO_S16LSB:
            if (value & AFMT_S16_LE) {
                format = AFMT_S16_LE;
            }
            break;
        case AUDIO_S16MSB:
            if (value & AFMT_S16_BE) {
                format = AFMT_S16_BE;
            }
            break;
#if 0
/*
 * These formats are not used by any real life systems so they are not 
 * needed here.
 */
        case AUDIO_S8:
            if (value & AFMT_S8) {
                format = AFMT_S8;
            }
            break;
        case AUDIO_U16LSB:
            if (value & AFMT_U16_LE) {
                format = AFMT_U16_LE;
            }
            break;
        case AUDIO_U16MSB:
            if (value & AFMT_U16_BE) {
                format = AFMT_U16_BE;
            }
            break;
#endif
        default:
            format = 0;
            break;
        }
        if (!format) {
            test_format = SDL_NextAudioFormat();
        }
    }
    if (format == 0) {
        SDL_SetError("Couldn't find any hardware audio formats");
        DSP_CloseAudio(this);
        return (-1);
    }
    spec->format = test_format;

    /* Set the audio format */
    value = format;
    if ((ioctl(audio_fd, SNDCTL_DSP_SETFMT, &value) < 0) || (value != format)) {
        perror("SNDCTL_DSP_SETFMT");
        SDL_SetError("Couldn't set audio format");
        DSP_CloseAudio(this);
        return (-1);
    }

    /* Set the number of channels of output */
    value = spec->channels;
    if (ioctl(audio_fd, SNDCTL_DSP_CHANNELS, &value) < 0) {
        perror("SNDCTL_DSP_CHANNELS");
        SDL_SetError("Cannot set the number of channels");
        DSP_CloseAudio(this);
        return (-1);
    }
    spec->channels = value;

    /* Set the DSP frequency */
    value = spec->freq;
    if (ioctl(audio_fd, SNDCTL_DSP_SPEED, &value) < 0) {
        perror("SNDCTL_DSP_SPEED");
        SDL_SetError("Couldn't set audio frequency");
        DSP_CloseAudio(this);
        return (-1);
    }
    spec->freq = value;

    /* Calculate the final parameters for this audio specification */
    SDL_CalculateAudioSpec(spec);

    /* Determine the power of two of the fragment size */
    for (frag_spec = 0; (0x01U << frag_spec) < spec->size; ++frag_spec);
    if ((0x01U << frag_spec) != spec->size) {
        SDL_SetError("Fragment size must be a power of two");
        DSP_CloseAudio(this);
        return (-1);
    }
    frag_spec |= 0x00020000;    /* two fragments, for low latency */

    /* Set the audio buffering parameters */
#ifdef DEBUG_AUDIO
    fprintf(stderr, "Requesting %d fragments of size %d\n",
            (frag_spec >> 16), 1 << (frag_spec & 0xFFFF));
#endif
    if (ioctl(audio_fd, SNDCTL_DSP_SETFRAGMENT, &frag_spec) < 0) {
        perror("SNDCTL_DSP_SETFRAGMENT");
    }
#ifdef DEBUG_AUDIO
    {
        audio_buf_info info;
        ioctl(audio_fd, SNDCTL_DSP_GETOSPACE, &info);
        fprintf(stderr, "fragments = %d\n", info.fragments);
        fprintf(stderr, "fragstotal = %d\n", info.fragstotal);
        fprintf(stderr, "fragsize = %d\n", info.fragsize);
        fprintf(stderr, "bytes = %d\n", info.bytes);
    }
#endif

    /* Allocate mixing buffer */
    mixlen = spec->size;
    mixbuf = (Uint8 *) SDL_AllocAudioMem(mixlen);
    if (mixbuf == NULL) {
        DSP_CloseAudio(this);
        return (-1);
    }
    SDL_memset(mixbuf, spec->silence, spec->size);

    /* Get the parent process id (we're the parent of the audio thread) */
    parent = getpid();

    /* We're ready to rock and roll. :-) */
    return (0);
}

/* vi: set ts=4 sw=4 expandtab: */