view src/video/riscos/SDL_riscostask.c @ 4426:1bceff8f008f

Fixed bug #943 Ozkan Sezer 2010-02-06 12:31:06 PST Hi: Here are some small fixes for compiling SDL against mingw-w64. (see http://mingw-w64.sourceforge.net/ . Despite the name, it supports both win32 and win64.) src/audio/windx5/directx.h and src/video/windx5/directx.h (both SDL-1.2 and SDL-1.3.) I get compilation errors about some union not having a member named u1 and alike, because of other system headers being included before this one and them already defining DUMMYUNIONNAME and stuff. This header probably assumes that those stuff are defined in windef.h, but mingw-w64 headers define them in _mingw.h. Easily fixed by moving NONAMELESSUNION definition to the top of the file. src/thread/win32/SDL_systhread.c (both SDL-1.2 and SDL-1.3.) : The __GNUC__ case for pfnSDL_CurrentBeginThread is 32-bit centric because _beginthreadex returns uintptr_t, not unsigned long which is 32 bits in win64. Changing the return type to uintptr_t fixes it. video/SDL_blit.h (and configure.in) (SDL-1.3-only) : MinGW-w64 uses msvcrt version of _aligned_malloc and _aligned_free and they are defined in intrin.h (similar to VC). Adding proper ifdefs fixes it. (Notes about macros to check: __MINGW32__ is defined for both mingw.org and for mingw-w64 for both win32 and win64, __MINGW64__ is only defined for _WIN64, so __MINGW64__ can't be used to detect mingw-w64: including _mingw.h and then checking for __MINGW64_VERSION_MAJOR does the trick.) SDL_win32video.h (SDL-1.3-only) : Tweaked the VINWER definition and location in order to avoid multiple redefinition warnings. Hope these are useful. Thanks.
author Sam Lantinga <slouken@libsdl.org>
date Wed, 10 Mar 2010 15:02:58 +0000
parents f7b03b6838cb
children
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2010 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/*
    This file added by Alan Buckley (alan_baa@hotmail.com) to support RISC OS 
	26 March 2003

	File includes routines for:
	  Setting up as a WIMP Task
	  Reading information about the current desktop
	  Storing information before a switch to full screen
	  Restoring desktop after switching to full screen
*/

#include "kernel.h"
#include "swis.h"

#include "SDL_stdinc.h"
#include "SDL_riscostask.h"

#if !SDL_THREADS_DISABLED
#include <pthread.h>
pthread_t main_thread;
#endif

/* RISC OS variables */

static int task_handle = 0;
static int wimp_version = 0;

/* RISC OS variables to help compatability with certain programs */
int riscos_backbuffer = 0;      /* Create a back buffer in system memory for full screen mode */
int riscos_closeaction = 1;     /* Close icon action */

static int stored_mode = -1;    /* -1 when in desktop, mode number or pointer when full screen */

extern int mouseInWindow;       /* Mouse is in WIMP window */

/* Local function */

static int RISCOS_GetTaskName(char *task_name, size_t maxlen);

/* Uncomment next line to copy mode changes/restores to stderr */
/* #define DUMP_MODE */
#ifdef DUMP_MODE
#include "stdio.h"
static void
dump_mode()
{
    fprintf(stderr, "mode %d\n", stored_mode);
    if (stored_mode < -1 || stored_mode >= 256) {
        int blockSize = 0;
        int *storeBlock = (int *) stored_mode;

        while (blockSize < 5 || storeBlock[blockSize] != -1) {
            fprintf(stderr, "   %d\n", storeBlock[blockSize++]);
        }
    }
}
#endif

/******************************************************************

 Initialise as RISC OS Wimp task

*******************************************************************/

int
RISCOS_InitTask()
{
    char task_name[32];
    _kernel_swi_regs regs;
    int messages[4];

    if (RISCOS_GetTaskName(task_name, SDL_arraysize(task_name)) == 0)
        return 0;

    messages[0] = 9;            /* Palette changed */
    messages[1] = 0x400c1;      /* Mode changed */
    messages[2] = 8;            /* Pre quit */
    messages[2] = 0;

    regs.r[0] = (unsigned int) 360;     /* Minimum version 3.6 */
    regs.r[1] = (unsigned int) 0x4b534154;
    regs.r[2] = (unsigned int) task_name;
    regs.r[3] = (unsigned int) messages;

    if (_kernel_swi(Wimp_Initialise, &regs, &regs) == 0) {
        wimp_version = regs.r[0];
        task_handle = regs.r[1];
        return 1;
    }
#if !SDL_THREADS_DISABLED
    main_thread = pthread_self();
#endif

    return 0;
}

/*********************************************************************

  Close down application on exit.

**********************************************************************/

void
RISCOS_ExitTask()
{
    _kernel_swi_regs regs;

    if (stored_mode == -1) {
        /* Ensure cursor is put back to standard pointer shape if
           we have been running in a window */
        _kernel_osbyte(106, 1, 0);
    }

    /* Ensure we end up back in the wimp */
    RISCOS_RestoreWimpMode();

    /* Neatly exit the task */
    regs.r[0] = task_handle;
    regs.r[1] = (unsigned int) 0x4b534154;
    _kernel_swi(Wimp_CloseDown, &regs, &regs);
    task_handle = 0;
}

/**************************************************************************

  Get the name of the task for the desktop.

  Param:   task_name - name of task 32 characters.

  Returns: 1 is successful, otherwise 0

  Notes:   Works by getting using OS_GetEnv to get the command line
		   used to run the program and then parsing a name from it
		   as follows.

		   1. Use name after final period if not !RunImage
		   2. If name is !RunImage then process item before the period
		      in front of !RunImage.
		   3. If directory name use that
		   4. if in form <XXX$Dir> use the XXX.

		   Finally once this value has been retrieved use it unless
		   there is a variable set up in the form SDL$<name>$TaskName
		   in which case the value of this variable will be used.

		   Now also gets other RISC OS configuration varibles
                SDL$<name>$BackBuffer - set to 1 to use a system memory backbuffer in fullscreen mode
						    so updates wait until a call to SDL_UpdateRects. (default 0)
						    This is required for programmes where they have assumed this is
						    always the case which is contrary to the documentation.
               SDL$<name>$CloseAction
                    0 Don't show close icon
                    1 Show close icon

***************************************************************************/

int
RISCOS_GetTaskName(char *task_name, size_t maxlen)
{
    _kernel_swi_regs regs;

    task_name[0] = 0;

    /* Figure out a sensible task name */
    if (_kernel_swi(OS_GetEnv, &regs, &regs) == 0) {
        char *command_line = (char *) regs.r[0];
        size_t len = SDL_strlen(command_line) + 1;
        char *buffer = SDL_stack_alloc(char, len);
        char *env_var;
        char *p;

        SDL_strlcpy(buffer, command_line, len);
        p = SDL_strchr(buffer, ' ');
        if (p)
            *p = 0;
        p = SDL_strrchr(buffer, '.');
        if (p == 0)
            p = buffer;
        if (stricmp(p + 1, "!RunImage") == 0) {
            *p = 0;
            p = SDL_strrchr(buffer, '.');
            if (p == 0)
                p = buffer;
        }
        if (*p == '.')
            p++;
        if (*p == '!')
            p++;                /* Skip "!" at beginning of application directories */

        if (*p == '<') {
            // Probably in the form <appname$Dir>
            char *q = SDL_strchr(p, '$');
            if (q == 0)
                q = SDL_strchr(p, '>'); /* Use variable name if not */
            if (q)
                *q = 0;
            p++;                /* Move over the < */
        }

        if (*p) {
            /* Read variables that effect the RISC OS SDL engine for this task */
            len = SDL_strlen(p) + 18;   /* 18 is larger than the biggest variable name */
            env_var = SDL_stack_alloc(char, len);
            if (env_var) {
                char *env_val;

                /* See if a variable of form SDL$<dirname>$TaskName exists */

                SDL_strlcpy(env_var, "SDL$", len);
                SDL_strlcat(env_var, p, len);
                SDL_strlcat(env_var, "$TaskName", len);

                env_val = SDL_getenv(env_var);
                if (env_val)
                    SDL_strlcpy(task_name, env_val, maxlen);

                SDL_strlcpy(env_var, "SDL$", len);
                SDL_strlcat(env_var, p, len);
                SDL_strlcat(env_var, "$BackBuffer", len);

                env_val = SDL_getenv(env_var);
                if (env_val)
                    riscos_backbuffer = atoi(env_val);

                SDL_strlcpy(env_var, "SDL$", len);
                SDL_strlcat(env_var, p, len);
                SDL_strlcat(env_var, "$CloseAction", len);

                env_val = SDL_getenv(env_var);
                if (env_val && SDL_strcmp(env_val, "0") == 0)
                    riscos_closeaction = 0;

                SDL_stack_free(env_var);
            }

            if (!*task_name)
                SDL_strlcpy(task_name, p, maxlen);
        }

        SDL_stack_free(buffer);
    }

    if (task_name[0] == 0)
        SDL_strlcpy(task_name, "SDL Task", maxlen);

    return 1;
}

/*****************************************************************

  Store the current desktop screen mode if we are in the desktop.

******************************************************************/

void
RISCOS_StoreWimpMode()
{
    _kernel_swi_regs regs;

    /* Don't store if in full screen mode */
    if (stored_mode != -1)
        return;

    regs.r[0] = 1;
    _kernel_swi(OS_ScreenMode, &regs, &regs);
    if (regs.r[1] >= 0 && regs.r[1] < 256)
        stored_mode = regs.r[1];
    else {
        int blockSize = 0;
        int *retBlock = (int *) regs.r[1];
        int *storeBlock;
        int j;

        while (blockSize < 5 || retBlock[blockSize] != -1)
            blockSize++;
        blockSize++;
        storeBlock = (int *) SDL_malloc(blockSize * sizeof(int));
        retBlock = (int *) regs.r[1];
        for (j = 0; j < blockSize; j++)
            storeBlock[j] = retBlock[j];

        stored_mode = (int) storeBlock;
    }
#if DUMP_MODE
    fprintf(stderr, "Stored ");
    dump_mode();
#endif
}

/*****************************************************************

  Restore desktop screen mode if we are in full screen mode.

*****************************************************************/

void
RISCOS_RestoreWimpMode()
{
    _kernel_swi_regs regs;

    /* Only need to restore if we are in full screen mode */
    if (stored_mode == -1)
        return;

#if DUMP_MODE
    fprintf(stderr, "Restored");
    dump_mode();
#endif

    regs.r[0] = stored_mode;
    _kernel_swi(Wimp_SetMode, &regs, &regs);
    if (stored_mode < 0 || stored_mode > 256) {
        SDL_free((int *) stored_mode);
    }
    stored_mode = -1;

    /* Flush keyboard buffer to dump the keystrokes we've already polled */
    regs.r[0] = 21;
    regs.r[1] = 0;              /* Keyboard buffer number */
    _kernel_swi(OS_Byte, &regs, &regs);

    mouseInWindow = 0;

}

/*********************************************************************

  Get version of Wimp running when task was initialised.

*********************************************************************/

int
RISCOS_GetWimpVersion()
{
    return wimp_version;
}

int
RISCOS_GetTaskHandle()
{
    return task_handle;
}

/* vi: set ts=4 sw=4 expandtab: */