view test/testgamma.c @ 998:0e6627072f7a

Date: Wed, 24 Nov 2004 01:25:48 +0100 From: Stephane Marchesin Subject: Re: [SDL] Problem compiling SDL 1.2.7 - there is a bug that was introduced in the kernel headers for 2.6.9 which is fixed in 2.6.10. This bug *will* byte when compiling the cdrom subsystem. A patch that works around this bug is attached. Note that users affected are not those running 2.6.9, but those using the 2.6.9 kernel headers for their system (i.e. whose libc is built against 2.6.9 headers).
author Sam Lantinga <slouken@libsdl.org>
date Tue, 30 Nov 2004 14:45:08 +0000
parents 74212992fb08
children be9c9c8f6d53
line wrap: on
line source


/* Bring up a window and manipulate the gamma on it */

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>

#include "SDL.h"

/* Turn a normal gamma value into an appropriate gamma ramp */
void CalculateGamma(double gamma, Uint16 *ramp)
{
	int i, value;

	gamma = 1.0 / gamma;
	for ( i=0; i<256; ++i ) {
		value = (int)(pow((double)i/256.0, gamma)*65535.0 + 0.5);
		if ( value > 65535 ) {
			value = 65535;
		}
		ramp[i] = (Uint16)value;
	}
}

/* This can be used as a general routine for all of the test programs */
int get_video_args(char *argv[], int *w, int *h, int *bpp, Uint32 *flags)
{
	int i;

	*w = 640;
	*h = 480;
	*bpp = 0;
	*flags = SDL_SWSURFACE;

	for ( i=1; argv[i]; ++i ) {
		if ( strcmp(argv[i], "-width") == 0 ) {
			if ( argv[i+1] ) {
				*w = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-height") == 0 ) {
			if ( argv[i+1] ) {
				*h = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-bpp") == 0 ) {
			if ( argv[i+1] ) {
				*bpp = atoi(argv[++i]);
			}
		} else
		if ( strcmp(argv[i], "-fullscreen") == 0 ) {
			*flags |= SDL_FULLSCREEN;
		} else
		if ( strcmp(argv[i], "-hw") == 0 ) {
			*flags |= SDL_HWSURFACE;
		} else
		if ( strcmp(argv[i], "-hwpalette") == 0 ) {
			*flags |= SDL_HWPALETTE;
		} else
			break;
	}
	return i;
}

int main(int argc, char *argv[])
{
	SDL_Surface *screen;
	SDL_Surface *image;
	float gamma;
	int i;
	int w, h, bpp;
	Uint32 flags;
	Uint16 ramp[256];
	Uint16 red_ramp[256];
	Uint32 then, timeout;

	/* Check command line arguments */
	argv += get_video_args(argv, &w, &h, &bpp, &flags);

	/* Initialize SDL */
	if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) {
		fprintf(stderr,
			"Couldn't initialize SDL: %s\n", SDL_GetError());
		exit(1);
	}
	atexit(SDL_Quit);

	/* Initialize the display, always use hardware palette */
	screen = SDL_SetVideoMode(w, h, bpp, flags | SDL_HWPALETTE);
	if ( screen == NULL ) {
		fprintf(stderr, "Couldn't set %dx%d video mode: %s\n",
						w, h, SDL_GetError());
		exit(1);
	}

	/* Set the window manager title bar */
	SDL_WM_SetCaption("SDL gamma test", "testgamma");

	/* Set the desired gamma, if any */
	gamma = 1.0f;
	if ( *argv ) {
		gamma = (float)atof(*argv);
	}
	if ( SDL_SetGamma(gamma, gamma, gamma) < 0 ) {
		fprintf(stderr, "Unable to set gamma: %s\n", SDL_GetError());
		exit(1);
	}

#if 0 /* This isn't supported.  Integrating the gamma ramps isn't exact */
	/* See what gamma was actually set */
	float real[3];
	if ( SDL_GetGamma(&real[0], &real[1], &real[2]) < 0 ) {
		printf("Couldn't get gamma: %s\n", SDL_GetError());
	} else {
		printf("Set gamma values: R=%2.2f, G=%2.2f, B=%2.2f\n",
			real[0], real[1], real[2]);
	}
#endif

	/* Do all the drawing work */
	image = SDL_LoadBMP("sample.bmp");
	if ( image ) {
		SDL_Rect dst;

		dst.x = (screen->w - image->w)/2;
		dst.y = (screen->h - image->h)/2;
		dst.w = image->w;
		dst.h = image->h;
		SDL_BlitSurface(image, NULL, screen, &dst);
		SDL_UpdateRects(screen, 1, &dst);
	}

	/* Wait a bit, handling events */
	then = SDL_GetTicks();
	timeout = (5*1000);
	while ( (SDL_GetTicks()-then) < timeout ) {
		SDL_Event event;

		while ( SDL_PollEvent(&event) ) {
			switch (event.type) {
			    case SDL_QUIT:	/* Quit now */
				timeout = 0;
				break;
			    case SDL_KEYDOWN:
				switch (event.key.keysym.sym) {
				    case SDLK_SPACE:	/* Go longer.. */
					timeout += (5*1000);
					break;
				    case SDLK_UP:
					gamma += 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_DOWN:
					gamma -= 0.2f;
					SDL_SetGamma(gamma, gamma, gamma);
					break;
				    case SDLK_ESCAPE:
					timeout = 0;
					break;
				    default:
					break;
				}
				break;
			}
		}
	}

	/* Perform a gamma flash to red using color ramps */
	while ( gamma < 10.0 ) {
		/* Increase the red gamma and decrease everything else... */
		gamma += 0.1f;
		CalculateGamma(gamma, red_ramp);
		CalculateGamma(1.0/gamma, ramp);
		SDL_SetGammaRamp(red_ramp, ramp, ramp);
	}
	/* Finish completely red */
	memset(red_ramp, 255, sizeof(red_ramp));
	memset(ramp, 0, sizeof(ramp));
	SDL_SetGammaRamp(red_ramp, ramp, ramp);

	/* Now fade out to black */
	for ( i=(red_ramp[0] >> 8); i >= 0; --i ) {
		memset(red_ramp, i, sizeof(red_ramp));
		SDL_SetGammaRamp(red_ramp, NULL, NULL);
	}
	SDL_Delay(1*1000);

	return(0);
}