Mercurial > sdl-ios-xcode
view test/testgamma.c @ 1554:0ca607a5d173
Fixed bug #84
Date: Sun, 23 Oct 2005 16:39:03 +0200
From: "A. Schmid" <sahib@phreaker.net>
Subject: [SDL] no software surfaces with svgalib driver?
Hi,
I noticed that the SDL (1.2.9) svgalib driver only makes use of linear
addressable (framebuffer) video modes. On older systems (like one of
mine), linear addressable modes are often not available.
Especially for cards with VESA VBE < 2.0 the svgalib vesa driver is
unusable, since VESA only supports framebuffering for VBE 2.0 and later.
The changes necessary to add support for software surfaces seem to be
relatively small. I only had to hack src/video/svga/SDL_svgavideo.c (see
attached patch). The code worked fine for me, but it is no more than a
proof of concept and should be reviewed (probably has a memory leak when
switching modes). It also uses the vgagl library (included in the
svgalib package) and needs to be linked against it.
-Alex
author | Sam Lantinga <slouken@libsdl.org> |
---|---|
date | Sun, 19 Mar 2006 12:04:40 +0000 |
parents | be9c9c8f6d53 |
children | 782fd950bd46 c121d94672cb |
line wrap: on
line source
/* Bring up a window and manipulate the gamma on it */ #include <stdlib.h> #include <stdio.h> #include <string.h> #include <math.h> #include "SDL.h" /* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */ static void quit(int rc) { SDL_Quit(); exit(rc); } /* Turn a normal gamma value into an appropriate gamma ramp */ void CalculateGamma(double gamma, Uint16 *ramp) { int i, value; gamma = 1.0 / gamma; for ( i=0; i<256; ++i ) { value = (int)(pow((double)i/256.0, gamma)*65535.0 + 0.5); if ( value > 65535 ) { value = 65535; } ramp[i] = (Uint16)value; } } /* This can be used as a general routine for all of the test programs */ int get_video_args(char *argv[], int *w, int *h, int *bpp, Uint32 *flags) { int i; *w = 640; *h = 480; *bpp = 0; *flags = SDL_SWSURFACE; for ( i=1; argv[i]; ++i ) { if ( strcmp(argv[i], "-width") == 0 ) { if ( argv[i+1] ) { *w = atoi(argv[++i]); } } else if ( strcmp(argv[i], "-height") == 0 ) { if ( argv[i+1] ) { *h = atoi(argv[++i]); } } else if ( strcmp(argv[i], "-bpp") == 0 ) { if ( argv[i+1] ) { *bpp = atoi(argv[++i]); } } else if ( strcmp(argv[i], "-fullscreen") == 0 ) { *flags |= SDL_FULLSCREEN; } else if ( strcmp(argv[i], "-hw") == 0 ) { *flags |= SDL_HWSURFACE; } else if ( strcmp(argv[i], "-hwpalette") == 0 ) { *flags |= SDL_HWPALETTE; } else break; } return i; } int main(int argc, char *argv[]) { SDL_Surface *screen; SDL_Surface *image; float gamma; int i; int w, h, bpp; Uint32 flags; Uint16 ramp[256]; Uint16 red_ramp[256]; Uint32 then, timeout; /* Check command line arguments */ argv += get_video_args(argv, &w, &h, &bpp, &flags); /* Initialize SDL */ if ( SDL_Init(SDL_INIT_VIDEO) < 0 ) { fprintf(stderr, "Couldn't initialize SDL: %s\n", SDL_GetError()); return(1); } /* Initialize the display, always use hardware palette */ screen = SDL_SetVideoMode(w, h, bpp, flags | SDL_HWPALETTE); if ( screen == NULL ) { fprintf(stderr, "Couldn't set %dx%d video mode: %s\n", w, h, SDL_GetError()); quit(1); } /* Set the window manager title bar */ SDL_WM_SetCaption("SDL gamma test", "testgamma"); /* Set the desired gamma, if any */ gamma = 1.0f; if ( *argv ) { gamma = (float)atof(*argv); } if ( SDL_SetGamma(gamma, gamma, gamma) < 0 ) { fprintf(stderr, "Unable to set gamma: %s\n", SDL_GetError()); quit(1); } #if 0 /* This isn't supported. Integrating the gamma ramps isn't exact */ /* See what gamma was actually set */ float real[3]; if ( SDL_GetGamma(&real[0], &real[1], &real[2]) < 0 ) { printf("Couldn't get gamma: %s\n", SDL_GetError()); } else { printf("Set gamma values: R=%2.2f, G=%2.2f, B=%2.2f\n", real[0], real[1], real[2]); } #endif /* Do all the drawing work */ image = SDL_LoadBMP("sample.bmp"); if ( image ) { SDL_Rect dst; dst.x = (screen->w - image->w)/2; dst.y = (screen->h - image->h)/2; dst.w = image->w; dst.h = image->h; SDL_BlitSurface(image, NULL, screen, &dst); SDL_UpdateRects(screen, 1, &dst); } /* Wait a bit, handling events */ then = SDL_GetTicks(); timeout = (5*1000); while ( (SDL_GetTicks()-then) < timeout ) { SDL_Event event; while ( SDL_PollEvent(&event) ) { switch (event.type) { case SDL_QUIT: /* Quit now */ timeout = 0; break; case SDL_KEYDOWN: switch (event.key.keysym.sym) { case SDLK_SPACE: /* Go longer.. */ timeout += (5*1000); break; case SDLK_UP: gamma += 0.2f; SDL_SetGamma(gamma, gamma, gamma); break; case SDLK_DOWN: gamma -= 0.2f; SDL_SetGamma(gamma, gamma, gamma); break; case SDLK_ESCAPE: timeout = 0; break; default: break; } break; } } } /* Perform a gamma flash to red using color ramps */ while ( gamma < 10.0 ) { /* Increase the red gamma and decrease everything else... */ gamma += 0.1f; CalculateGamma(gamma, red_ramp); CalculateGamma(1.0/gamma, ramp); SDL_SetGammaRamp(red_ramp, ramp, ramp); } /* Finish completely red */ memset(red_ramp, 255, sizeof(red_ramp)); memset(ramp, 0, sizeof(ramp)); SDL_SetGammaRamp(red_ramp, ramp, ramp); /* Now fade out to black */ for ( i=(red_ramp[0] >> 8); i >= 0; --i ) { memset(red_ramp, i, sizeof(red_ramp)); SDL_SetGammaRamp(red_ramp, NULL, NULL); } SDL_Delay(1*1000); SDL_Quit(); return(0); }