Mercurial > sdl-ios-xcode
view test/testfile.c @ 2318:0c653886cce7
HandleEvent() returns done each time it is called. If done was set to 0 the program should quit, but because done is not checked until *all* events are handled a
following event can reset done to 1 and prevent the program from terminating when told to. I fixed the while loop that handles events to check for the state of done
after handling each event. That could leave some events unhandled when the program exits, but it ensures that the program will exit.
author | Bob Pendleton <bob@pendleton.com> |
---|---|
date | Wed, 20 Feb 2008 23:27:33 +0000 |
parents | 891ed60fcaa9 |
children | daf3baf72a45 f55c87ae336b |
line wrap: on
line source
/* sanity tests on SDL_rwops.c (usefull for alternative implementations of stdio rwops) */ #include <stdlib.h> #ifndef _MSC_VER #include <unistd.h> #endif #include "SDL.h" #include "SDL_endian.h" #include <stdio.h> /* WARNING ! those 2 files will be destroyed by this test program */ #define FBASENAME1 "sdldata1" /* this file will be created during tests */ #define FBASENAME2 "sdldata2" /* this file should not exists before starting test */ #ifndef NULL #define NULL ((void *)0) #endif static void cleanup(void) { unlink(FBASENAME1); unlink(FBASENAME2); } static void rwops_error_quit(unsigned line, SDL_RWops * rwops) { printf("testfile.c(%d): failed\n", line); if (rwops) { rwops->close(rwops); /* This calls SDL_FreeRW(rwops); */ } cleanup(); exit(1); /* quit with rwops error (test failed) */ } #define RWOP_ERR_QUIT(x) rwops_error_quit( __LINE__, (x) ) int main(int argc, char *argv[]) { SDL_RWops *rwops = NULL; char test_buf[30]; cleanup(); /* test 1 : basic argument test: all those calls to SDL_RWFromFile should fail */ rwops = SDL_RWFromFile(NULL, NULL); if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile(NULL, "ab+"); if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile(NULL, "sldfkjsldkfj"); if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile("something", ""); if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile("something", NULL); if (rwops) RWOP_ERR_QUIT(rwops); printf("test1 OK\n"); /* test 2 : check that inexistant file is not successfully opened/created when required */ /* modes : r, r+ implie that file MUST exist modes : a, a+, w, w+ checks that it succeeds (file may not exists) */ rwops = SDL_RWFromFile(FBASENAME2, "rb"); /* this file doesn't exist that call must fail */ if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile(FBASENAME2, "rb+"); /* this file doesn't exist that call must fail */ if (rwops) RWOP_ERR_QUIT(rwops); rwops = SDL_RWFromFile(FBASENAME2, "wb"); if (!rwops) RWOP_ERR_QUIT(rwops); rwops->close(rwops); unlink(FBASENAME2); rwops = SDL_RWFromFile(FBASENAME2, "wb+"); if (!rwops) RWOP_ERR_QUIT(rwops); rwops->close(rwops); unlink(FBASENAME2); rwops = SDL_RWFromFile(FBASENAME2, "ab"); if (!rwops) RWOP_ERR_QUIT(rwops); rwops->close(rwops); unlink(FBASENAME2); rwops = SDL_RWFromFile(FBASENAME2, "ab+"); if (!rwops) RWOP_ERR_QUIT(rwops); rwops->close(rwops); unlink(FBASENAME2); printf("test2 OK\n"); /* test 3 : creation, writing , reading, seeking, test : w mode, r mode, w+ mode */ rwops = SDL_RWFromFile(FBASENAME1, "wb"); /* write only */ if (!rwops) RWOP_ERR_QUIT(rwops); if (1 != rwops->write(rwops, "1234567890", 10, 1)) RWOP_ERR_QUIT(rwops); if (10 != rwops->write(rwops, "1234567890", 1, 10)) RWOP_ERR_QUIT(rwops); if (7 != rwops->write(rwops, "1234567", 1, 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); /* we are in write only mode */ rwops->close(rwops); rwops = SDL_RWFromFile(FBASENAME1, "rb"); /* read mode, file must exists */ if (!rwops) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (20 != rwops->seek(rwops, -7, RW_SEEK_END)) RWOP_ERR_QUIT(rwops); if (7 != rwops->read(rwops, test_buf, 1, 7)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "1234567", 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 10, 100)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR)) RWOP_ERR_QUIT(rwops); if (2 != rwops->read(rwops, test_buf, 10, 3)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "12345678901234567890", 20)) RWOP_ERR_QUIT(rwops); if (0 != rwops->write(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); /* readonly mode */ rwops->close(rwops); /* test 3: same with w+ mode */ rwops = SDL_RWFromFile(FBASENAME1, "wb+"); /* write + read + truncation */ if (!rwops) RWOP_ERR_QUIT(rwops); if (1 != rwops->write(rwops, "1234567890", 10, 1)) RWOP_ERR_QUIT(rwops); if (10 != rwops->write(rwops, "1234567890", 1, 10)) RWOP_ERR_QUIT(rwops); if (7 != rwops->write(rwops, "1234567", 1, 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (1 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); /* we are in read/write mode */ if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (20 != rwops->seek(rwops, -7, RW_SEEK_END)) RWOP_ERR_QUIT(rwops); if (7 != rwops->read(rwops, test_buf, 1, 7)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "1234567", 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 10, 100)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR)) RWOP_ERR_QUIT(rwops); if (2 != rwops->read(rwops, test_buf, 10, 3)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "12345678901234567890", 20)) RWOP_ERR_QUIT(rwops); rwops->close(rwops); printf("test3 OK\n"); /* test 4: same in r+ mode */ rwops = SDL_RWFromFile(FBASENAME1, "rb+"); /* write + read + file must exists, no truncation */ if (!rwops) RWOP_ERR_QUIT(rwops); if (1 != rwops->write(rwops, "1234567890", 10, 1)) RWOP_ERR_QUIT(rwops); if (10 != rwops->write(rwops, "1234567890", 1, 10)) RWOP_ERR_QUIT(rwops); if (7 != rwops->write(rwops, "1234567", 1, 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (1 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); /* we are in read/write mode */ if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (20 != rwops->seek(rwops, -7, RW_SEEK_END)) RWOP_ERR_QUIT(rwops); if (7 != rwops->read(rwops, test_buf, 1, 7)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "1234567", 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 10, 100)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR)) RWOP_ERR_QUIT(rwops); if (2 != rwops->read(rwops, test_buf, 10, 3)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "12345678901234567890", 20)) RWOP_ERR_QUIT(rwops); rwops->close(rwops); printf("test4 OK\n"); /* test5 : append mode */ rwops = SDL_RWFromFile(FBASENAME1, "ab+"); /* write + read + append */ if (!rwops) RWOP_ERR_QUIT(rwops); if (1 != rwops->write(rwops, "1234567890", 10, 1)) RWOP_ERR_QUIT(rwops); if (10 != rwops->write(rwops, "1234567890", 1, 10)) RWOP_ERR_QUIT(rwops); if (7 != rwops->write(rwops, "1234567", 1, 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (1 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (20 + 27 != rwops->seek(rwops, -7, RW_SEEK_END)) RWOP_ERR_QUIT(rwops); if (7 != rwops->read(rwops, test_buf, 1, 7)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "1234567", 7)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 1, 1)) RWOP_ERR_QUIT(rwops); if (0 != rwops->read(rwops, test_buf, 10, 100)) RWOP_ERR_QUIT(rwops); if (27 != rwops->seek(rwops, -27, RW_SEEK_CUR)) RWOP_ERR_QUIT(rwops); if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET)) RWOP_ERR_QUIT(rwops); if (3 != rwops->read(rwops, test_buf, 10, 3)) RWOP_ERR_QUIT(rwops); if (SDL_memcmp(test_buf, "123456789012345678901234567123", 30)) RWOP_ERR_QUIT(rwops); rwops->close(rwops); printf("test5 OK\n"); cleanup(); return 0; /* all ok */ }