view src/SDL.c @ 2318:0c653886cce7

HandleEvent() returns done each time it is called. If done was set to 0 the program should quit, but because done is not checked until *all* events are handled a following event can reset done to 1 and prevent the program from terminating when told to. I fixed the while loop that handles events to check for the state of done after handling each event. That could leave some events unhandled when the program exits, but it ensures that the program will exit.
author Bob Pendleton <bob@pendleton.com>
date Wed, 20 Feb 2008 23:27:33 +0000
parents 8f1ab2f7c722
children 3f73c88c9abb f1d07ba2e275 0906692aa6a4
line wrap: on
line source

/*
    SDL - Simple DirectMedia Layer
    Copyright (C) 1997-2006 Sam Lantinga

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

    Sam Lantinga
    slouken@libsdl.org
*/
#include "SDL_config.h"

/* Initialization code for SDL */

#include "SDL.h"
#include "SDL_fatal.h"
#if !SDL_VIDEO_DISABLED
#include "video/SDL_leaks.h"
#endif

#if SDL_THREAD_PTH
#include <pth.h>
#endif

/* Initialization/Cleanup routines */
#if !SDL_JOYSTICK_DISABLED
extern int SDL_JoystickInit(void);
extern void SDL_JoystickQuit(void);
#endif
#if !SDL_CDROM_DISABLED
extern int SDL_CDROMInit(void);
extern void SDL_CDROMQuit(void);
#endif
#if !SDL_TIMERS_DISABLED
extern void SDL_StartTicks(void);
extern int SDL_TimerInit(void);
extern void SDL_TimerQuit(void);
#endif

/* The initialized subsystems */
static Uint32 SDL_initialized = 0;
static Uint32 ticks_started = 0;

#ifdef CHECK_LEAKS
int surfaces_allocated = 0;
#endif

int
SDL_InitSubSystem(Uint32 flags)
{
#if !SDL_VIDEO_DISABLED
    /* Initialize the video/event subsystem */
    if ((flags & SDL_INIT_VIDEO) && !(SDL_initialized & SDL_INIT_VIDEO)) {
        if (SDL_VideoInit(NULL, (flags & SDL_INIT_EVENTTHREAD)) < 0) {
            return (-1);
        }
        SDL_initialized |= SDL_INIT_VIDEO;
    }
#else
    if (flags & SDL_INIT_VIDEO) {
        SDL_SetError("SDL not built with video support");
        return (-1);
    }
#endif

#if !SDL_AUDIO_DISABLED
    /* Initialize the audio subsystem */
    if ((flags & SDL_INIT_AUDIO) && !(SDL_initialized & SDL_INIT_AUDIO)) {
        if (SDL_AudioInit(NULL) < 0) {
            return (-1);
        }
        SDL_initialized |= SDL_INIT_AUDIO;
    }
#else
    if (flags & SDL_INIT_AUDIO) {
        SDL_SetError("SDL not built with audio support");
        return (-1);
    }
#endif

#if !SDL_TIMERS_DISABLED
    /* Initialize the timer subsystem */
    if (!ticks_started) {
        SDL_StartTicks();
        ticks_started = 1;
    }
    if ((flags & SDL_INIT_TIMER) && !(SDL_initialized & SDL_INIT_TIMER)) {
        if (SDL_TimerInit() < 0) {
            return (-1);
        }
        SDL_initialized |= SDL_INIT_TIMER;
    }
#else
    if (flags & SDL_INIT_TIMER) {
        SDL_SetError("SDL not built with timer support");
        return (-1);
    }
#endif

#if !SDL_JOYSTICK_DISABLED
    /* Initialize the joystick subsystem */
    if ((flags & SDL_INIT_JOYSTICK) && !(SDL_initialized & SDL_INIT_JOYSTICK)) {
        if (SDL_JoystickInit() < 0) {
            return (-1);
        }
        SDL_initialized |= SDL_INIT_JOYSTICK;
    }
#else
    if (flags & SDL_INIT_JOYSTICK) {
        SDL_SetError("SDL not built with joystick support");
        return (-1);
    }
#endif

#if !SDL_CDROM_DISABLED
    /* Initialize the CD-ROM subsystem */
    if ((flags & SDL_INIT_CDROM) && !(SDL_initialized & SDL_INIT_CDROM)) {
        if (SDL_CDROMInit() < 0) {
            return (-1);
        }
        SDL_initialized |= SDL_INIT_CDROM;
    }
#else
    if (flags & SDL_INIT_CDROM) {
        SDL_SetError("SDL not built with cdrom support");
        return (-1);
    }
#endif
    return (0);
}

int
SDL_Init(Uint32 flags)
{
#if !SDL_THREADS_DISABLED && SDL_THREAD_PTH
    if (!pth_init()) {
        return -1;
    }
#endif

    /* Clear the error message */
    SDL_ClearError();

    /* Initialize the desired subsystems */
    if (SDL_InitSubSystem(flags) < 0) {
        return (-1);
    }

    /* Everything is initialized */
    if (!(flags & SDL_INIT_NOPARACHUTE)) {
        SDL_InstallParachute();
    }
    return (0);
}

void
SDL_QuitSubSystem(Uint32 flags)
{
    /* Shut down requested initialized subsystems */
#if !SDL_CDROM_DISABLED
    if ((flags & SDL_initialized & SDL_INIT_CDROM)) {
        SDL_CDROMQuit();
        SDL_initialized &= ~SDL_INIT_CDROM;
    }
#endif
#if !SDL_JOYSTICK_DISABLED
    if ((flags & SDL_initialized & SDL_INIT_JOYSTICK)) {
        SDL_JoystickQuit();
        SDL_initialized &= ~SDL_INIT_JOYSTICK;
    }
#endif
#if !SDL_TIMERS_DISABLED
    if ((flags & SDL_initialized & SDL_INIT_TIMER)) {
        SDL_TimerQuit();
        SDL_initialized &= ~SDL_INIT_TIMER;
    }
#endif
#if !SDL_AUDIO_DISABLED
    if ((flags & SDL_initialized & SDL_INIT_AUDIO)) {
        SDL_AudioQuit();
        SDL_initialized &= ~SDL_INIT_AUDIO;
    }
#endif
#if !SDL_VIDEO_DISABLED
    if ((flags & SDL_initialized & SDL_INIT_VIDEO)) {
        SDL_VideoQuit();
        SDL_initialized &= ~SDL_INIT_VIDEO;
    }
#endif
}

Uint32
SDL_WasInit(Uint32 flags)
{
    if (!flags) {
        flags = SDL_INIT_EVERYTHING;
    }
    return (SDL_initialized & flags);
}

void
SDL_Quit(void)
{
    /* Quit all subsystems */
#ifdef DEBUG_BUILD
    printf("[SDL_Quit] : Enter! Calling QuitSubSystem()\n");
    fflush(stdout);
#endif
    SDL_QuitSubSystem(SDL_INIT_EVERYTHING);

#ifdef CHECK_LEAKS
#ifdef DEBUG_BUILD
    printf("[SDL_Quit] : CHECK_LEAKS\n");
    fflush(stdout);
#endif

    /* Print the number of surfaces not freed */
    if (surfaces_allocated != 0) {
        fprintf(stderr, "SDL Warning: %d SDL surfaces extant\n",
                surfaces_allocated);
    }
#endif
#ifdef DEBUG_BUILD
    printf("[SDL_Quit] : SDL_UninstallParachute()\n");
    fflush(stdout);
#endif

    /* Uninstall any parachute signal handlers */
    SDL_UninstallParachute();

#if !SDL_THREADS_DISABLED && SDL_THREAD_PTH
    pth_kill();
#endif
#ifdef DEBUG_BUILD
    printf("[SDL_Quit] : Returning!\n");
    fflush(stdout);
#endif

}

/* Get the library version number */
void
SDL_GetVersion(SDL_version * ver)
{
    SDL_VERSION(ver);
}

#if defined(__OS2__)
/* Building for OS/2 */
#ifdef __WATCOMC__

#define INCL_DOSERRORS
#define INCL_DOSEXCEPTIONS
#include <os2.h>

/* Exception handler to prevent the Audio thread hanging, making a zombie process! */
ULONG _System
SDL_Main_ExceptionHandler(PEXCEPTIONREPORTRECORD pERepRec,
                          PEXCEPTIONREGISTRATIONRECORD pERegRec,
                          PCONTEXTRECORD pCtxRec, PVOID p)
{
    if (pERepRec->fHandlerFlags & EH_EXIT_UNWIND)
        return XCPT_CONTINUE_SEARCH;
    if (pERepRec->fHandlerFlags & EH_UNWINDING)
        return XCPT_CONTINUE_SEARCH;
    if (pERepRec->fHandlerFlags & EH_NESTED_CALL)
        return XCPT_CONTINUE_SEARCH;

    /* Do cleanup at every fatal exception! */
    if (((pERepRec->ExceptionNum & XCPT_SEVERITY_CODE) ==
         XCPT_FATAL_EXCEPTION) && (pERepRec->ExceptionNum != XCPT_BREAKPOINT)
        && (pERepRec->ExceptionNum != XCPT_SINGLE_STEP)) {
        if (SDL_initialized & SDL_INIT_AUDIO) {
            /* This removes the zombie audio thread in case of emergency. */
#ifdef DEBUG_BUILD
            printf
                ("[SDL_Main_ExceptionHandler] : Calling SDL_CloseAudio()!\n");
#endif
            SDL_CloseAudio();
        }
    }
    return (XCPT_CONTINUE_SEARCH);
}


EXCEPTIONREGISTRATIONRECORD SDL_Main_xcpthand =
    { 0, SDL_Main_ExceptionHandler };

/* The main DLL entry for DLL Initialization and Uninitialization: */
unsigned _System
LibMain(unsigned hmod, unsigned termination)
{
    if (termination) {
#ifdef DEBUG_BUILD
/*    printf("[SDL DLL Unintialization] : Removing exception handler\n"); */
#endif
        DosUnsetExceptionHandler(&SDL_Main_xcpthand);
        return 1;
    } else {
#ifdef DEBUG_BUILD
        /* Make stdout and stderr unbuffered! */
        setbuf(stdout, NULL);
        setbuf(stderr, NULL);
#endif
        /* Fire up exception handler */
#ifdef DEBUG_BUILD
/*    printf("[SDL DLL Initialization] : Setting exception handler\n"); */
#endif
        /* Set exception handler */
        DosSetExceptionHandler(&SDL_Main_xcpthand);

        return 1;
    }
}
#endif /* __WATCOMC__ */

#elif defined(__WIN32__)

#if !defined(HAVE_LIBC) || (defined(__WATCOMC__) && defined(BUILD_DLL))
/* Need to include DllMain() on Watcom C for some reason.. */
#define WIN32_LEAN_AND_MEAN
#include <windows.h>

BOOL APIENTRY
_DllMainCRTStartup(HANDLE hModule,
                   DWORD ul_reason_for_call, LPVOID lpReserved)
{
    switch (ul_reason_for_call) {
    case DLL_PROCESS_ATTACH:
    case DLL_THREAD_ATTACH:
    case DLL_THREAD_DETACH:
    case DLL_PROCESS_DETACH:
        break;
    }
    return TRUE;
}
#endif /* building DLL with Watcom C */

#endif /* OS/2 elif __WIN32__ */

/* vi: set ts=4 sw=4 expandtab: */