.TH "SDL_ConvertAudio" "3" "Tue 11 Sep 2001, 22:58" "SDL" "SDL API Reference" 
.SH "NAME"
SDL_ConvertAudio \- Convert audio data to a desired audio format\&.
.SH "SYNOPSIS"
.PP
\fB#include "SDL\&.h"
.sp
\fBint \fBSDL_ConvertAudio\fP\fR(\fBSDL_AudioCVT *cvt\fR);
.SH "DESCRIPTION"
.PP
\fBSDL_ConvertAudio\fP takes one parameter, \fBcvt\fR, which was previously initilized\&. Initilizing a \fI\fBSDL_AudioCVT\fR\fR is a two step process\&. First of all, the structure must be passed to \fI\fBSDL_BuildAudioCVT\fP\fR along with source and destination format parameters\&. Secondly, the \fBcvt\fR->\fBbuf\fR and \fBcvt\fR->\fBlen\fR fields must be setup\&. \fBcvt\fR->\fBbuf\fR should point to the audio data and \fBcvt\fR->\fBlen\fR should be set to the length of the audio data in bytes\&. Remember, the length of the buffer pointed to by \fBbuf\fR show be \fBlen\fR*\fBlen_mult\fR bytes in length\&.
.PP
Once the \fBSDL_AudioCVT\fRstructure is initilized then we can pass it to \fBSDL_ConvertAudio\fP, which will convert the audio data pointer to by \fBcvt\fR->\fBbuf\fR\&. If \fBSDL_ConvertAudio\fP returned \fB0\fR then the conversion was completed successfully, otherwise \fB-1\fR is returned\&.
.PP
If the conversion completed successfully then the converted audio data can be read from \fBcvt\fR->\fBbuf\fR\&. The amount of valid, converted, audio data in the buffer is equal to \fBcvt\fR->\fBlen\fR*\fBcvt\fR->\fBlen_ratio\fR\&.
.SH "EXAMPLES"
.PP
.nf
\f(CW/* Converting some WAV data to hardware format */
void my_audio_callback(void *userdata, Uint8 *stream, int len);

SDL_AudioSpec *desired, *obtained;
SDL_AudioSpec wav_spec;
SDL_AudioCVT  wav_cvt;
Uint32 wav_len;
Uint8 *wav_buf;
int ret;

/* Allocated audio specs */
desired=(SDL_AudioSpec *)malloc(sizeof(SDL_AudioSpec));
obtained=(SDL_AudioSpec *)malloc(sizeof(SDL_AudioSpec));

/* Set desired format */
desired->freq=22050;
desired->format=AUDIO_S16LSB;
desired->samples=8192;
desired->callback=my_audio_callback;
desired->userdata=NULL;

/* Open the audio device */
if ( SDL_OpenAudio(desired, obtained) < 0 ){
  fprintf(stderr, "Couldn\&'t open audio: %s
", SDL_GetError());
  exit(-1);
}
        
free(desired);

/* Load the test\&.wav */
if( SDL_LoadWAV("test\&.wav", &wav_spec, &wav_buf, &wav_len) == NULL ){
  fprintf(stderr, "Could not open test\&.wav: %s
", SDL_GetError());
  SDL_CloseAudio();
  free(obtained);
  exit(-1);
}
                                            
/* Build AudioCVT */
ret = SDL_BuildAudioCVT(&wav_cvt,
                        wav_spec\&.format, wav_spec\&.channels, wav_spec\&.freq,
                        obtained->format, obtained->channels, obtained->freq);

/* Check that the convert was built */
if(ret==-1){
  fprintf(stderr, "Couldn\&'t build converter!
");
  SDL_CloseAudio();
  free(obtained);
  SDL_FreeWAV(wav_buf);
}

/* Setup for conversion */
wav_cvt\&.buf=(Uint8 *)malloc(wav_len*wav_cvt\&.len_mult);
wav_cvt\&.len=wav_len;
memcpy(wav_cvt\&.buf, wav_buf, wav_len);

/* We can delete to original WAV data now */
SDL_FreeWAV(wav_buf);

/* And now we\&'re ready to convert */
SDL_ConvertAudio(&wav_cvt);

/* do whatever */
\&.
\&.
\&.
\&.

\fR
.fi
.PP
.SH "SEE ALSO"
.PP
\fI\fBSDL_BuildAudioCVT\fP\fR, \fI\fBSDL_AudioCVT\fP\fR
...\" created by instant / docbook-to-man, Tue 11 Sep 2001, 22:58